www.moosesound.com
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
LOUD
Active Line Array system
MADE IN
PORTUGAL
100%
EUROPEAN
MAN173_1
USER’S MANUAL
Active Line Array system
LOUD
Introduction
Dear customer,
Thank for choosing MOOSE branded products!
MOOSE is a brand of professional audio & lighting products, proudly developed and manufactured in
PORTUGAL.
In order to operate this product in a safe and reliable manner, please follow the instructions in this booklet and
before operating the equipment read the instructions carefully and please note the technical information.
Our products undergo very rigorous testing under strict conditions and they are monitored continuosly during the
manufacturing process. In order to guarantee the product function and safety, the original parts of the
manufacturer's design must be used. If any parts other than those of the manufacturer are used, or the product is
modified in any way, the user forfeits all warranty rights to claim.
Caution
1. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match
the values specified on the equipment.
2. If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet
with a protective ground. Never deactivate the protective ground of a power cord.
3. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before
extended periods of disuse.
4. Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service company.
5. Do not open or modify this equipment.
6. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping
hazards.
7. Do not turn on the Amplifier ON before checking that all volumes to zero .
IMPORTANT: Never remove the cover, because otherwise there may be a risk of electric shock. There are no user
serviceable parts inside. Have repairs carried out only by qualified service personnel.
The lightning flash with arrowhead symbol within an equila teral triangle is intended
to alert the user to the presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to constitute a risk of
electrical shock.
The exclamation mark within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instructions.
RIS K OF EL ECTRI C SH OCK. DO NOT OPE N.
CAUTION
The amplifier is marked with this instruction so please
proceed accordingly in order to avoi d any hazard.
To pr eve nt ele ct ric al shock do not re mo ve
the cover. No u se r se rvice ab le p ar ts ins id e.
Refer ser vi ce to qu alified personnel only.
www.moosesound.com 2
MAN173_1
Active Line Array system
LOUD
Manufacturers Declaration
PROPER DISPOSAL OF THIS PRODUCT
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details on where and how they can recycle this item in an environmentally friendly manner.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal .
ENVIRONMENTAL PROTECTION AND ENERGY CONSERVATION
Energy conservation is an active contribution to environmental protection. Please turn off all unneeded electrical
devices. To prevent unneeded devices from consuming power in standby mode, disconnect the mains plug.
EC DECLARATION OF CONFORMITY
The equipment marketed by MOOSE complies (where applicable) with the essential requirements and other
relevant specifications of Directives 1999/5/EC (R&TTE), 2004/108/EC (EMC) und 2006/95/EC (LVD). Additional
information can be requested to info@profactor.pt.
PROUDLY DEVELOPED AND MANUFACTURED IN PORTUGAL
www.moosesound.com 3
MAN173_1
Connections and Controls
Please refer to the following scheme and instructions:
Active Line Array system
LOUD
798
AC INPUT AC OUTPUT
MAINS
85-264Vac
50HZ
MID HI
PIN
11
POWER ON
10
PROUDLY DEVELOPED AND MANUFACTURED IN PORTUGAL
FUSE F 5A
U
F
SIGNAL
LOAD
S
E
SPEAKER OUT
OUTPUT
+1 -1 +2 -2
4 Ohm min.
CAUTION
RISK OF ELEC TRIC SHO CK. DO NOT OPEN .
To preve nt elec trica l shoc k do no t remo ve
the cove r. No us er ser vicea ble par ts in side.
Refer ser vice to qualifi ed perso nnel only.
1 2 4 5
BALANCED
PIN
SIGNAL SIGNAL
UNBALANCED
1 2 3 1 2 3
PIN
INPUT THROUGH
Active line array system
Class D Amplifier
Integrated DSP
A B C D E
USB
PRESET
-80dB
LOUD
720W rms
LOW
MID/HI 720W rms
6
0dB
3
1. INPUT: Balanced signal input (Combi) for connection of an external audio source (e.g., mixer).
2. LINK: Balanced signal output (XLR 3p) for connection of another LOUD active system.
3. USB: USB 2.0 port (type B) to connect the cable to establish communication between DSP and computer.
4. PRESET LED: Preset LED indicator, from A to E, there are 5 storable and selectable presets.
5. PREST: Preset push button to select one of the 5 storable presets on the DSP, from A to E.
6. VOLUME: Master LEVEL system adjustment.
7. OUTPUT: Speaker output (NL4) for connection of the first LOUD205 array element. Min. load: 4Ohm. The other
3 array elements are signal linked from each other using the cables supplied.
8. MAINS IN: NEUTRIK powerCON socket, 85~264Vac, 50~60Hz Power-in (blue).
9. MAINS OUT: NEUTRIK powerCON socket, 85~264Vac, 50~60Hz Power-out (white).
10. POWER ON: Illuminated on/off switch. Before switching the system on/off, always adjust the volume to zero.
11. FUSE: Fuse holder. Replace the fuse only with a fuse of the same type and rating. If the fuse blows repeatedly,
please contact an authorised service company.
www.moosesound.com 4
MAN173_1
Connections and Controls
Please refer to the following scheme and instructions:
Active Line Array system
LOUD
10 11
INPUT LINK
LOUD
INPUT LINK
LOUD
205
Power - 150W rms
Impedance - 16 Ohm
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
OUTPUT MID HI
+1-1
+2-2
PIN
SIGNAL
INPUT LINK
LOUD
205
Power - 150W rms
Impedance - 16 Ohm
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
OUTPUT MID HI
+1-1
+2-2
PIN
SIGNAL
205
INPUT LINK
LOUD
205
Power - 150W rms
Impedance - 16 Ohm
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
OUTPUT MID HI
+1-1
+2-2
PIN
SIGNAL
INPUT LINK
LOUD
205
Power - 150W rms
Impedance - 16 Ohm
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
OUTPUT MID HI
+1-1
+2-2
PIN
SIGNAL
OUTPUT MID HI
+1 -1
PIN
SIGNAL
+2 -2
Power - 150W rms
Impedance - 16 Ohm
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
Speakon ou t
fro m am plifi er ( 6)
10. INPUT: Speakon compatible speaker connection. Bi-amp. setup (refer to the pinout printed in the connector
plate). Establish the connection between the subwoofer SPEAKER OUTPUT (6) and the first LOUD205 array
element.
11. LINK: Speakon compatible speaker link connection for connection of the next LOUD205 array element.
NOTE: the suited speaker cables (4x 1.5mm ) are supplied in the package.
2
Dimensions
450
500
492
170
340
492
Unit: mm (mi limete rs)
IMPORTANT NOTE: LOUD system is designed for both ground stacking or flying operation. However, we consider
the flown position as being the ‘’standard’’ one. Facing this fact, when using the system on the floor operation the
metal grilles will show an upside down MOOSE logo as the system is used in what we call ‘’inverted position’’.
www.moosesound.com 5
MAN173_1
Technical specifications
MODE L LOUD S YSTEM
TYPE Active Line Array system
ENCLOSURE DESIGN Bass reflex (LOUD15)
POWER OUTPUT (RMS) 700W (LOUD15)
FREQUENCY RANGE 45Hz - 19kHz
NOMINAL IMPEDANCE Speaker OUT: 4ohm min.
TRANSDUCER TYPE 15" LF (LOUD15)
DISPERSION 120° H x Array length-splay dependent
CROSSOVER FREQUENCY Adjustable by integrated DSP
MAX. S.P.L. (PEAK) 128dB @ 1m (LOUD15)
Active Line Array system
LOUD
Trapezoidal array element (LOUD205)
400W (LOUD205)
2x 5" MF + 1" HF (LOUD205)
113dB @ 1m (LOUD205)
AMPLIFIER
POWER (RMS)
INPUT
OUTPUT/LINK
SPEAKER OUT
INDICATORS
CONTROLS Master level, 5 selectable presets
PROTECTIONS
OPERATING VOLTAGE
AC MAINS CONNECTOR NEUTRIK powerCON, Power-in / Power-out
CONSTRUCTION 15mm birch plywood, textured polyurea coating
GRILLE Custom perforated metal grille w/ acoustic foam
INSTALLATION, RIGGING, FLYING Integrated Al/Steel rigging system
DIMENSIONS (WxDxH)
WEIGHT 30Kg (LOUD15), 7,5Kg (LOUD205)
490x495x430mm (LOUD15), 490x340x170mm (LOUD205)
19.29x19.49x16.93in (LOUD15), 19.29x13.39x6.69in (LOUD205)
720W + 720W @ 4ohm (2000W peak)
Over current, short circuit, thermal, DC, HF
103.6lb (LOUD15), 16.5lb (LOUD205)
Class D - SMPS
XLR/Jack Combo connector
XLR 3p
Speakon® NL4
Power, signal, preset in use
SMPS, 85-264Vac
PROFACTOR S.A., a ll rights reserved. The tech nical data an d the funct ional product charac te ristics c an be subje ct
to modifications. The photocopying, the tra nslation, and all other fo rms of copyin g of fragme nts or of the i ntegrlity
of this user's manual is prohi bited.
www.moosesound.com 6
MAN173_1
aprovou
www.moosesound.com
CONJUNTO FL-LOUD15
Cliente
Nome do desenho
mm
Revisão
Unidades
Substitui
ISO 2768
CLASSE - M
Material
Espessura
Tolerâncias
19-02-2015
desenhou
data
Cor
1
/
1
conjunto FS 205
Nome
do ficheiro
Páginas
Nelson
nome
Localização
Guilhotina:
Quinadora:
Puncionadora:
280,8
xxxx
Ref.ª do Aparelho
Des. nº.
15045
DSS
Base de dados:
Ordem:
Referência:
FL-LOUD15
Flying frame for LOUD15
460 interior
MOOSE is a brand or PROFACTOR S.A.
IMP86_1
aprovou
www.moosesound.com
CONJUNTO FS 205
Cliente
Nome do desenho
mm
Revisão
Unidades
Substitui
ISO 2768
CLASSE - M
Material
Espessura
Tolerâncias
19-02-2015
desenhou
data
Cor
1
/
1
conjunto FS 205
Nome
do ficheiro
Páginas
Nelson
nome
Localização
Guilhotina:
Quinadora:
Puncionadora:
FS-LOUD205
Stand support for LOUD205 stacking
xxxx
Ref.ª do Aparelho
Des. nº.
15045
DSS
Base de dados:
Ordem:
Referência:
471
MOOSE is a brand or PROFACTOR S.A.
IMP86_1
MOOSE is a brand or PROFACTOR S.A.
PROFACTOR S.A
Rua do Padrão 52
4440-617 Valongo
PORTUGAL
Telf.: +351 224 119 160
Fax: +351 224 155 822
info@profactor.pt
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
www.moosesound.com
Loading...