Active column PA speaker
USER’S MANUAL
MAN172_0
www.moosesound.com
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
Dear customer,
Thank for choosing MOOSE branded products!
MOOSE is a brand of professional audio & lighting products, proudly developed and manufactured in
PORTUGAL.
In order to operate this product in a safe and reliable manner, please follow the instructions in this booklet and
before operating the equipment read the instructions carefully and please note the technical information.
Our products undergo very rigorous testing under strict conditions and they are monitored continuosly during the
manufacturing process. In order to guarantee the product function and safety, the original parts of the
manufacturer's design must be used. If any parts other than those of the manufacturer are used, or the product is
modified in any way, the user forfeits all warranty rights to claim.
MAN172_0
CAUTION
RIS K OF EL ECTRI C SH OCK. DO NOT OPE N.
To pr eve nt ele ct ric al sho ck do not remov e
the cover. N o u se r se rv ice ab le p ar ts ins id e.
Refer ser vi ce to qu alified personnel only.
Introduction
www.moosesound.com 2
Caution
The light ning flash with a rrowhead symbol w ithin an equila teral triangle is intended
to alert t he user to the presence of u ninsulated "dangerous voltage" withi n the
prod uct's enclosure that may be of su fficient magnitu de to consti tute a ri sk of
electrical sho ck.
The exclamation mark within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instruc tions.
The ampli fier is marked w ith this instructi on so ple ase
proc eed accordingly in order to avoi d any hazard.
1. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match
the values specified on the equipment.
2. If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet
with a protective ground. Never deactivate the protective ground of a power cord.
3. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before
extended periods of disuse.
4. Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service company.
5. Do not open or modify this equipment.
6. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping
hazards.
7. Do not turn on the Amplifier ON before checking that all volumes to zero .
IMPORTANT: Never remove the cover, because otherwise there may be a risk of electric shock. There are no user
serviceable parts inside. Have repairs carried out only by qualified service personnel.
Active column PA speaker
MAN172_0
www.moosesound.com 3
Active column PA speaker
Manufacturers Declaration
PROPER DISPOSAL OF THIS PRODUCT
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details on where and how they can recycle this item in an environmentally friendly manner.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal .
ENVIRONMENTAL PROTECTION AND ENERGY CONSERVATION
Energy conservation is an active contribution to environmental protection. Please turn off all unneeded electrical
devices. To prevent unneeded devices from consuming power in standby mode, disconnect the mains plug.
EC DECLARATION OF CONFORMITY
The equipment marketed by MOOSE complies (where applicable) with the essential requirements and other
relevant specifications of Directives 1999/5/EC (R&TTE), 2004/108/EC (EMC) und 2006/95/EC (LVD). Additional
information can be requested to info@profactor.pt.
PROUDLY DEVELOPED AND MANUFACTURED IN PORTUGAL
MAN172_0
www.moosesound.com 4
Active column PA speaker
Connections and Controls
Please refer to the following scheme and instructions:
1. LOW OUT: Balanced signal output (XLR 3p) for connection of another active subwoofer.
2. INPUT: Balanced signal input (XLR 3p) for connection of an external audio source (e.g., mixer).
3. LINK: Balanced signal output (XLR 3p) for connection of another LANE1400 active system.
4. LOW VOLUME: Subwoofer volume adjustment. Sets the relative volume of subwoofer.
5. HI VOLUME: Mid/Hi column volume adjustment. Sets the relative volume of column speaker.
6. POWER ON: Illuminated on/off switch. Before switching the system on or off, always adjust the volume to
zero.
7. MAINS IN: NEUTRIK POWERCON socket, AC 230V - 50~60Hz.
8. FUSE: Fuse holder. Replace the fuse only with a fuse of the same type and rating. If the fuse blows repeatedly,
please contact an authorised service company.
CAUTION
RISK OF ELEC TRIC SHO CK. DO NOT OPEN .
To preve nt elec trica l shoc k do no t remo ve
the cove r. No us er ser vicea ble par ts in side.
Refer ser vice to quali ed perso nnel only.
BALANCED
PIN
SIGNAL SIGNAL
UNBALANCED
PIN
POWER
MAINS
230V AC
50HZ
600VA
FUSE F 6A
LOW OUT INPUT LINK LOW VOLUME HI VOLUME
www.moosesound.com
Low - 400 W
Mid/Hi - 300 W
X-Over Freq. - 180 Hz
DIGITAL AMPLIFIER
CLASS D
ONOFF
INPUT / LINK
1 2 3 1 2 3
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
Active column PA system
5
64
73
82
9
100
1
5
64
73
82
9
100
1
S
U
E
F
1
7
6
8
2 3
4
5
MAN172_0
www.moosesound.com 5
Active column PA speaker
Technical specifications
MODE L LANE 140 0
TYPE Active column PA system
ENCLOSURE DESIGN Bass reflex (subwoofer)
Sealed (column)
POWER OUTPUT (RMS) 400W (subwoofer)
400W (column)
PROGRAM POWER 1400W
FREQUENCY RANGE 50Hz - 20kHz
NOMINAL IMPEDANCE N/A
TRANSDUCER TYPE 15" LF (subwoofer)
8x 3" MF + 1" HF (column)
DISPERSION 120° horizontal (average)
CROSSOVER FREQUENCY 180Hz
MAX. S.P.L. (PEAK) 129dB @ 1m
CONSTRUCTION 15mm birch plywood (subwoofer)
Aluminum (column)
GRILLE Custom perforated metal grille
INSTALLATION, RIGGING, FLYING Plug-and-play column fitting
DIMENSIONS (WxDxH)
107x95x1320mm (column)
430x540x428mm (subwoofer)
WEIGHT 25Kg (subwoofer)
8Kg (column)
AMPLIFICATION Class D (digital)
INPUT SENSITIVITY -2 dBu / +4 dBu
CONTROLS Sub level, Hi level, ON/OFF switch
CONNECTORS Line in: XLR 3p, Line out: XLR 3p, LOW out: XLR 3p
Speaker out: Speakon® NL4
PROTECTION Short circuit, limiter
PROFACTOR S.A., a ll rights res erved. The tech ni cal data an d the funct ional produ ct charac te ristics c an be subje ct
to modific ations. T he photocopyi ng, the tra nslation, a nd all othe r fo rms of copyin g of fragme nts or of the i nteg rlity
of this us er's manu al is prohi bited.
430
428
95
Unit: mm (mi limete rs)
107
1320
www.moosesound.com
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
PROFACTOR S.A
Rua do Padrão 52
4440-617 Valongo
PORTUGAL
Telf.: +351 224 119 160
Fax: +351 224 155 822
info@profactor.pt
MOOSE is a brand or PROFACTOR S.A.
Loading...