MOOSE CX15A Man208_1-CX12A_CX15A.pdf

www.moosesound.com

PROUDLY DEVELOPED AND

MANUFACTURED IN PORTUGAL

SOUL SERIES

CX12A & CX15A

Active coaxial stage monitors

MADE IN

PORTUGAL

100%

EUROPEAN

MAN208_1

USER’S MANUAL

CX12A & CX15A

Active coaxial stage monitors

Introduction

Dear customer,

Thank for choosing MOOSE branded products!

MOOSE is a brand of professional audio & lighting products, proudly developed and manufactured in
PORTUGAL.

In order to operate this product in a safe and reliable manner, please follow the instructions in this booklet and
before operating the equipment read the instructions carefully and please note the technical information.

Our products undergo very rigorous testing under strict conditions and they are monitored continuosly during the
manufacturing process. In order to guarantee the product function and safety, the original parts of the
manufacturer's design must be used. If any parts other than those of the manufacturer are used, or the product is
modified in any way, the user forfeits all warranty rights to claim.

Caution

1. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match

the values specified on the equipment.

2. If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet
with a protective ground. Never deactivate the protective ground of a power cord.

3. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before
extended periods of disuse.

4. Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service company.

5. Do not open or modify this equipment.

6. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping

hazards.

7. Do not turn on the Amplifier ON before checking that all volumes to zero .

IMPORTANT: Never remove the cover, because otherwise there may be a risk of electric shock. There are no user

serviceable parts inside. Have repairs carried out only by qualified service personnel.

The lightnin g flash with arrowhead symbol within an equilateral triangle is intended
to alert the user to the presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to constitute a risk o f
electrical shock.

The exclamation mark within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instructions.

RIS K OF EL ECTRI C SH OCK. DO NOT OP EN.

CAUTION

The amplifie r is marked with this instruction so please
proceed accordingly in order to avoid any hazard.

To pr event e lec tr ic al sh oc k do not rem ove
the cov er. No us er se r vi cea bl e p ar ts in si de .

Refer ser vice to qu al ified personnel only.

www.moosesound.com 2

MAN208_1

CX12A & CX15A

Active coaxial stage monitors

Manufacturers Declaration

PROPER DISPOSAL OF THIS PRODUCT

(Valid in the European Union and other European countries with waste separation)

This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.

Household users should contact either the retailer where they purchased this product, or their local government
office, for details on where and how they can recycle this item in an environmentally friendly manner.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal .

ENVIRONMENTAL PROTECTION AND ENERGY CONSERVATION

Energy conservation is an active contribution to environmental protection. Please turn off all unneeded electrical
devices. To prevent unneeded devices from consuming power in standby mode, disconnect the mains plug.

EC DECLARATION OF CONFORMITY

The equipment marketed by MOOSE complies (where applicable) with the essential requirements and other
relevant specifications of Directives 1999/5/EC (R&TTE), 2004/108/EC (EMC) und 2006/95/EC (LVD). Additional
information can be requested to [e-mail].

PROUDLY DEVELOPED AND MANUFACTURED IN PORTUGAL

PROFACTOR S.A., all right s reserved. The tech nical data and the funct ion al produ ct characte ris tics can be subject
to mod ifi cations. The photocopying, the translation, and a ll other forms of co pying of f rag ments or of the integrlity
of this user's ma nua l is prohi bited.

www.moosesound.com 3

MAN208_1

Connections and Controls

Please refer to the following scheme and instructions:

CX12A
CX15A

CX12A & CX15A

Active coaxial stage monitors

4

5

8

POWER ON

2-way active coaxial monitor

Class D Amplifier
Integrated DSP

INPUT

CX12A

750W rms

LOW
IMP.

THROUGH

4ohm

A B C D E

A B C D E

USB

PRESET

EQ

7

-80dB

-80dB

0dB

AC INPUT

85-264Vac

50HZ

CAUTION

RISK OF ELEC TRIC SHO CK. DO NOT OPEN .

1

2

To preve nt elec trica l shoc k do no t remo ve
the cove r. No us er ser vicea ble par ts ins ide.
Refer ser vice to q ualifi ed perso nnel only.

3

1. INPUT: Balanced signal input (Combi) for connection of an external audio source (e.g., mixer).

2. LINK: Balanced signal output (XLR 3p) for connection of another ACTIVE speaker.

3. USB: USB 2.0 port (type B) to connect the cable to establish communication between DSP and computer.

4. PRESET LED: Preset LED indicator, from A to E, there are 5 storable and selectable presets.

5. PREST: Preset push button to select one of the 5 storable presets on the DSP, from A to E. Single press to

select the desired preset and when flashing the preset LED wanted long press to confirm the selection. The DSP
is supplied with 5 factory presets stored.

0dB

6

6. VOLUME: Master LEVEL system adjustment.

7. MAINS IN: NEUTRIK powerCON socket, 85~264Vac, 50~60Hz Power-in (blue).

8. POWER ON: Illuminated on/off switch. Before switching the system on, always adjust the volume to zero.

www.moosesound.com 4

MAN208_1

Technical specifications

MODE L CX12 A CX15 A

TYPE Coaxial stage monitor Coaxial stage monitor

ENCLOSURE DESIGN Bass reflex, ACTIVE Bass reflex, ACTIVE

POWER HANDLING CAPACITY

FREQUENCY RANGE 85Hz - 20kHz 80Hz - 20kHz

TRANSDUCER TYPE*

DISPERSION 80° Axisymetrical (conical)

CROSSOVER FREQUENCY

MAX. S.P.L. (PEAK) 124dB @ 1m

AMPLIFIER

POWER OUTPUT

INPUT

OUTPUT/LINK

INDICATORS

CONTROLS Master level, 5 selectable presets

PROTECTIONS

OPERATING VOLTAGE

AC MAINS CONNECTOR NEUTRIK powerCON, Power-in / Power-out

CONSTRUCTION 15mm birch plywood 15mm birch plywood

GRILLE Custom perforated metal grille w/ acoustic foam

INSTALLATION, RIGGING, FLYING 4 rubber feet, Ø35mm pole socket

DIMENSIONS (WxHxD) 580x540x360mm 610x540x360mm

WEIGHT

400W / 80W (AES) 400W / 80W (AES)

800W / 160W (Program) 800W / 180W (Program)

1600W (Peak) 1600W (Peak)

12" CX, LF (4in) + HF (2.87in) 15" CX, LF (4in) + HF (2.87in)

Adjustable by fully programmable DSP,

130dB @ 1m

Class D - SMPS Class D - SMPS

750W (continuous) 750W (continuous)

1500W (peak) 1500W (peak)

XLR/Jack Combo connector

XLR 3p

Power, signal, preset in use

Over current, short circuit, thermal, DC, HF

SMPS, 85-264Vac SMPS, 85-264Vac

22.83x21.26x14.17in

23.0Kg

50.7lb

24.01x21.26x14.17in

26.0Kg

57.3lb

CX12A & CX15A

Active coaxial stage monitors

Dimensions

CX12A

360mm

540mm

580mm

www.moosesound.com 5

MAN208_1

CX15A

360mm

540mm

610mm

MOOSE is a brand or PROFACTOR S.A.

PROFACTOR S.A

Rua do Padrão 52
4440-617 Valongo
PORTUGAL
Telf.: [phone]
Fax: [phone]
[e-mail]

PROUDLY DEVELOPED AND

MANUFACTURED IN PORTUGAL

www.moosesound.com