Moon Titan Brochure

… The leading edge in music & film reproduction

TITAN Multi-Channel Amplifier

Significant Design Features

200 watts RMS per channel into 8 ohms • A custom proprietary toroidal transformer design with lower magnetic, electrical and
thermal loss, yielding an improved power transfer and lower regulation factor, resulting in increased current speed and better
dynamics • An oversized power supply • “Class A” output to 5 watts for greater efficiency • Fully balanced circuitry up to the
output stage • Extremely fast circuitry for real-time amplification • Thermally inter-connected chassis design to maintain
identical operating temperatures for all channels which enhances sonic harmony between channels • Virtually non-existent
intermodulation distortion • Precision matched Bipolar output devices which offer superb linearity throughout the entire audio
frequency spectrum • A high damping factor which yields superior musical dynamics, improved signal speed and refined timbre
accuracy • Extremely rigid chassis construction to minimize the effects of external vibrations • Accurate matching of the highest
quality electronic components • 12 Volt trigger for remote operation • Very short signal path for a faster transient response • A
symmetrical circuit design • Pure copper circuit board tracings with extremely low impedance characteristics • Designed to be
powered up at all times for optimal performance • Low operating temperature for a longer than normal life expectancy.

Specifications

Circuit type .................................... Solid State

Power supply transformers............... 2 x 1.1kVA

Class of operation ........................... A/AB

Input device type............................. JFETs

Input sensitivity ............................... 1050mV

Output power @ 8 ohms ................. 200 watts RMS/channel

Bandwidth (+0/-3dB)........................ 10Hz – 100kHz

Gain............................................... 33dB

Dynamic headroom.......................... 6dB

Maximum output voltage ................. 42V

Maximum current (cont./peak) ........ 15A / 30A

THD (20Hz-20kHz @1w) .................. < 0.05%

Intermodulation distortion................. Unmeasureable

Available faceplate finishes............... Black or Silver

Shipping weight .............................. 104 lbs

Preliminary specifications based on 5 channel configuration; subject to change without notice.

Simaudio Ltd., 95 Chemin du Tremblay, Unit 3, Boucherville, Quebec, J4B 7K4 Canada

Simaudio U.S.A., 21 Lawrence Paquette Industrial Park, Champlain, NY, 12919 U.S.A.

Configuration ........................... 3, 5 or 7 channels

Power supply capacitance ......... 216,000µF

Input connectors ...................... RCA and XLR

Input impedance ...................... 24.9k ohms

Output device type ................... Bipolars (8/channel)

Output power @ 4 ohms ........... 400 watts/channel

Output binding posts ................. Gold-Plated WBT

Damping factor ........................ 800 (static)

Signal-to-noise ratio ................. 100dBFS

Slew rate ................................ 80V/µs

Crosstalk ................................. < -90dB

Power consumption @ idle......... 75 watts

Warranty ................................. 5 years

Dimensions (w x h x d) ............ 19" x 12" x 19"

Tel: [phone] www.simaudio.com Fax: [phone]