moon Neo 350P Owner's Manual
Owner’s Manual
Series
350P
Preamplifier
350P Preamplifier
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves or another apparatus that produces
heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for safety. If the provided plug does not fit into the outlet, consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus. Unplug mains cord during transportation.
11. Only use attachments and accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as when the power cord or plug has been damaged; liquid has been spilled or objects have fallen into the
apparatus; or the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. No naked flame sources, such as candles, should be placed on the apparatus.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
____________________________________________________________________________________
350P Preamplifier
Important Safety Instructions (cont’d)
The lightning flash with the arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
Marking by the “CE” symbol (shown left) indicates compliance of this device with the
EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the
European Community
Please read all instructions and precautions carefully and completely before
operating your Simaudio MOON Nēo
1. ALWAYS disconnect your entire system from the AC mains before connecting or disconnecting any cables,
or when cleaning any component. To completely disconnect this apparatus from the AC mains, disconnect
the power supply cord plug from the AC receptacle.
2. The MOON 350P must be terminated with a three-conductor AC mains power cord which includes a
protective earthing connection. To prevent shock hazard, all three connections must ALWAYS be used.
Connect the MOON 350P only to an AC source of the proper voltage; Both the shipping box and rear panel
serial number label will indicate the correct voltage. Use of any other voltage will likely damage the unit and
void the warranty
3. AC extension cords are NOT recommended for use with this product. The mains plug of the power supply
cord shall remain readily accessible.
4. NEVER use flammable or combustible chemicals for cleaning audio components.
5. NEVER operate the MOON 350P with any covers removed. There are no user-serviceable parts inside. An
open unit, especially if it is still connected to an AC source, presents a potentially lethal shock hazard. Refer
all questions to authorized service personnel only.
6. NEVER wet the inside of the MOON 350P with any liquid. If a liquid substance does enter your MOON 350P,
immediately disconnect it from AC mains and take it to your MOON dealer for a complete check-up.
7. NEVER expose the MOON 350P to dripping or splashing of liquids and no objects filled with liquids, such as
vases, shall be placed on top.
8. NEVER block air flow through ventilation slots or heatsinks.
9. NEVER bypass any fuse.
10. NEVER replace any fuse with a value or type other than those specified
11. NEVER attempt to repair the MOON 350P. If a problem occurs contact your MOON dealer.
12. NEVER expose the MOON 350P to extremely high or low temperatures.
13. NEVER operate the MOON 350P in an explosive atmosphere.
14. ALWAYS keep electrical equipment out of reach of children.
15. ALWAYS unplug sensitive electronic equipment during lightning storms.
16. WARNING: Do not expose batteries or battery pack to excessive heat such as sunshine, or fire or the like.
____________________________________________________________________________________
350P Preamplifier.
350P Preamplifier
Table of Contents
Introduction .................................................... 5
Unpacking ....................................................... 6
Installation & Placement ................................... 6
Front Panel Controls ......................................... 7
Optional Digital Inputs ...................................... 7
Optional Phono Section ..................................... 9
Rear Panel Connections ................................... 11
Balanced Operation ........................................ 12
SimLink™ ..................................................... 12
Operating the 350P ........................................ 13
Remote Operation .......................................... 13
Specifications ................................................ 15
www.simaudio.com
Simaudio Ltd., 1345 Newton Road
Boucherville, Quebec J4B 5H2 CANADA
Date Code: 20130822
____________________________________________________________________________________
350P Preamplifier
Introduction
Thank you for selecting the Nēo 350P Preamplifier as a part of your hi-fi reproduction system. This preamplifier has been
designed to offer state-of-the-art high-end performance in an elegant package, while retaining all the sonic hallmarks on
which Simaudio has made its reputation. We have spared no effort to ensure that it is among the finest preamplifiers
available. We have been building high-performance audio equipment for over 30 years, and the know-how gained through our
cumulative experience is an important reason why MOON Preamplifiers are so musically satisfying.
The performance of your 350P will continue to improve during the first 300 hours of listening. This is the result of a “breakin” period required for the numerous high quality electronic parts used throughout this preamplifier.
Before setting up your new Nēo 350P, we encourage you to please read this manual thoroughly to properly acquaint yourself
with its features. We hope you enjoy listening to the Nēo 350P Premplifier as much as the pride we have taken in creating
this fine audio product. We understand the power and emotion of music and build our products with the goal of faithfully
capturing these elusive qualities.
The information contained in this manual is subject to change without notice. The most current version
of this manual is available on our official website at http://www.simaudio.com/manuals.htm
Your Nēo 350P Preamplifier incorporates many significant design features to achieve its “world-class” level of performance.
This is an abbreviated list of the more important features:
7 line-level inputs (4 single-ended & 2 balanced) including one front-mounted 1/8” mini-jack for personal media players
One single-ended audio input which functions as a “pass-through”, bypassing the gain stage to accommodate a
component such as a home-theater processor, whose own volume control is used instead.
A full-function monitor loop
Optional internal digital-to-analog converter circuit for use with a PC, digital music server or external transport, etc
Optional internal phono preamp circuit with adjustments for gain, capacitance and resistance loading
Discrete headphone amplifier circuit with the output on ¼” headphone socket located on the front panel
Fixed (single-ended) and Variable (balanced & single-ended) line level outputs
Remote control operation
RS-232 port for i) full unsolicited bidirectional feedback in custom installation setups and ii) firmware updates
IR input for external control
12 Volt Trigger Output
SimLinkTM controller port allows for 2-way communications between other compatible MOON components
Rigid chassis construction to minimize the effects of external vibrations
Designed to be powered up at all times for optimal performance
Low operating temperature for a ultra-long expectancy.
____________________________________________________________________________________
5
Loading...