… The leading edge in music & film reproduction
AURORA Multi-Channel Amplifier
Significant Design Features
200 watts RMS per channel into 8 ohms • A custom proprietary toroidal transformer design with lower magnetic, electrical and
thermal loss, yielding an improved power transfer and lower regulation factor, resulting in increased current speed and better
dynamics • An oversized power supply • “Class A” output to 5 watts for greater efficiency • Fully balanced circuitry up to the
output stage • Extremely fast circuitry for real-time amplification • "Rack mount ready" faceplate with removeable aluminum
cheeks to cover the rack holes when not in use • Thermally inter-connected chassis design to maintain identical operating
temperatures for all channels which enhances sonic harmony between channels • Virtually non-existent intermodulation
distortion • Precision matched Bipolar output devices which offer superb linearity throughout the entire audio frequency
spectrum • A high damping factor which yields superior musical dynamics, improved signal speed and refined timbre accuracy •
Extremely rigid chassis construction to minimize the effects of external vibrations • Accurate matching of the highest quality
electronic components • 12 Volt trigger for remote operation • Very short signal path for a faster transient response • A
symmetrical circuit design • Pure copper circuit board tracings with extremely low impedance characteristics • Designed to be
powered up at all times for optimal performance • Low operating temperature for a longer than normal life expectancy.
Specifications
Circuit type .................................... Solid State
Power supply transformer ................ 2.0kVA
Class of operation ........................... A/AB
Input device type............................. OPA
Input sensitivity ............................... 1050mV
Output power @ 8 ohms ................. 200 watts RMS/channel
Bandwidth (+0/-3dB)........................ 10Hz – 100kHz
Gain............................................... 29dB
Dynamic headroom.......................... 6dB
Maximum output voltage ................. 42V
Maximum current (cont./peak) ........ 14A / 28A
THD (20Hz-20kHz @1w) .................. < 0.05%
Intermodulation distortion................. Unmeasureable
Available faceplate finishes............... Black or Silver
Shipping weight .............................. 106 lbs
Preliminary specifications based on 5 channel configuration; subject to change without notice.
Simaudio Ltd., 95 Chemin du Tremblay, Unit 3, Boucherville, Quebec, J4B 7K4 Canada
Simaudio U.S.A., 21 Lawrence Paquette Industrial Park, Champlain, NY, 12919 U.S.A.
Configuration ........................... 5 or 7 channels
Power supply capacitance ......... 177,000µF
Input connectors ...................... RCA and XLR
Input impedance ...................... 22k ohms
Output device type ................... Bipolars (6/channel)
Output power @ 4 ohms ........... 400 watts/channel
Output binding posts ................. 1 set per channel
Damping factor ........................ 600 (static)
Signal-to-noise ratio ................. 98dBFS
Slew rate ................................ 75V/µs
Crosstalk ................................. < -96dB
Power consumption @ idle......... 15 watts
Rack-mount size ....................... 5 spaces
Warranty ................................. 5 years
Dimensions (w x h x d) ............ 19" x 8-3/4" x 26"
Tel: 1-877-980-2400 www.simaudio.com Fax: 450-449-9947