moon 810 LP Evolution Owner's Manual
Owner’s Manual
MOON
Evolution Series
810 LP
Reference Dual-Mono Phono Preamplifier
MOON 810LP Dual-Mono Phono Preamplifier
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves or another apparatus that produces
heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for safety. If the provided plug does not fit into the outlet, consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus. Unplug mains cord during transportation.
11. Only use attachments and accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as when the power cord or plug has been damaged; liquid has been spilled or objects have fallen into the
apparatus; or the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. No naked flame sources, such as candles, should be placed on the apparatus.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
____________________________________________________________________________________
MOON 810LP Dual-Mono Phono Preamplifier
Important Safety Instructions (cont’d)
The lightning flash with the arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
Marking by the “CE” symbol (shown left) indicates compliance of this device with the
EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the
European Community
Please read all instructions and precautions carefully and completely before
operating your Simaudio MOON 810LP Phono Preamplifier.
1. ALWAYS disconnect your entire system from the AC mains before connecting or disconnecting any cables,
or when cleaning any component.
2. The MOON 810LP must be terminated with a three-conductor AC mains power cord which includes an earth
ground connection. To prevent shock hazard, all three connections must ALWAYS be used. Connect the
MOON 810LP only to an AC source of the proper voltage; Both the shipping box and rear panel serial
number label will indicate the correct voltage. Use of any other voltage will likely damage the unit and void
the warranty.
3. AC extension cords are NOT recommended for use with this product.
4. NEVER use flammable or combustible chemicals for cleaning audio components.
5. NEVER operate the MOON 810LP with any covers removed. There are no user-serviceable parts inside. An
open unit, especially if it is still connected to an AC source, presents a potentially lethal shock hazard. Refer
all questions to authorized service personnel only.
6. NEVER wet the inside of the MOON 810LP with any liquid. If a liquid substance does enter your MOON
810LP, immediately disconnect it from the AC mains and take it to your MOON dealer for a complete checkup.
7. NEVER spill or pour liquids directly onto the MOON 810LP.
8. NEVER block air flow through ventilation slots or heatsinks.
9. NEVER bypass any fuse.
10. NEVER replace any fuse with a value or type other than those specified.
11. NEVER attempt to repair the MOON 810LP. If a problem occurs contact your MOON dealer.
12. NEVER expose the MOON 810LP to extremely high or low temperatures.
13. NEVER operate the MOON 810LP in an explosive atmosphere.
14. ALWAYS keep electrical equipment out of reach of children.
15. ALWAYS unplug sensitive electronic equipment during lightning storms.
____________________________________________________________________________________
MOON 810LP Dual-Mono Phono Preamplifier
Table of Contents
Congratulations ............................................... 5
Unpacking and Warnings ................................... 5
Introduction .................................................... 6
Installation & Placement ................................... 6
Bottom Panel Layout ........................................ 7
Cartridge Loading Adjustments .......................... 8
Rear Panel Connections ....................................11
Balanced Operation ....................................... 12
Operating the 810LP ........................................ 13
Specifications .................................................14
www.simaudio.com
Simaudio Ltd., 1345 Newton Road
Boucherville, Quebec J4B 5H2 CANADA
____________________________________________________________________________________
Date Code: 20120604
MOON 810LP Dual-Mono Phono Preamplifier
Congratulations!
Thank you for selecting the MOON 810LP Dual-Mono Phono Preamplifier as a part of your music/cinema system. This
component has been designed to offer state-of-the-art high-end performance in an elegant package, while retaining all the
sonic hallmarks on which Simaudio has made its reputation. We have spared no effort to ensure that it is amongst
phono preamplifiers available. We have been building high-performance audio equipment for over 25 years, and the
know-how gained through our cumulative experience is an important reason why MOON audio components are so musically
satisfying.
The performance of your 810LP will continue to improve during the first 500 hours of listening. This is the result of a “breakin” period required for the numerous high quality electronic parts used throughout this phono preamplifier.
Before setting up your new MOON 810LP, we encourage you to please read this manual thoroughly to properly acquaint
yourself with its features. We hope you enjoy listening to the MOON 810LP Phono Preamplifier as much as the pride we
have taken in creating this fine audio product. We understand the power and emotion of music and build our products with
the goal of faithfully capturing these elusive qualities.
The information contained in this manual is subject to change without notice. The most current version
of this manual is available on our official website at http://www.simaudio.com/manuals.htm
the finest
Unpacking
The MOON 810LP Phono Preamplifier should be removed from its box with care.
The following accessories should be included inside the box with your phono preamplifier:
9
AC power cable
9
One (1) pen shaped plastic hand tool for making DIP-switch adjustments
9
This owner’s manual
9
As soon as the phono preamplifier is safely removed from its box and placed down, perform a thorough physical inspection
and report any physical damage to your dealer
in a safe, dry place in the event that you’re required to transport this product. The customized packaging is specially designed
to protect the MOON 810LP Phono Preamplifier from potential damage that may occur during shipping.
Warranty and product registration information (USA and Canada only)
immediately. We suggest that you keep all of the original packaging, storing it
Please write the serial number of your new Simaudio MOON 810LP in the space provided below for future reference.
Serial No.: ________________
____________________________________________________________________________________
Congratulations / Unpacking 5
Loading...