Moog Videolarm AD8C-9, AP8C-9, AD16CH2, AP16CH2, AP16CH1 Specifications
HOUSING
ENCLOSURES_
AD8/AP8
AD16/AP16
AD/AP8C-9,
AD/AP16CH2, AP16CH1
Outdoor Tubular
Dustproof & Pressurized Environmental Housings
Moog Videolarm’s AD8C-9 and AP8C-9 units provide a compact camera solution for harsh environments. The units are constructed with a
sealed tubular housing made from a thick aluminum that offers outstanding protection for the camera from dust, moisture, insects, and
pollution. The pressurized and dustproof housing cameras can be adjusted without breaking the housings seal, RS232 connection. Moog
Videolarm has equipped the AD8C-9 and AP8C-9 with a xed high resolution color 23x (Vari-Focal Lens), auto-focus day/night camera (also
available in an IP model).
Key Features
•
•
Integrated heater/defogger
•
8” pressurized or dustproof tubular housing
•
Multi-pin, corrosion resistant connectors
•
Control with RS232 input via a Windows based
laptop using software provided
•
MCL 8”
24Vac input
•
Non-volatile memory stores all settings in the event of a power loss
•
Future enhancements include control via PDA and RS485
control with Moog Videolarm and other manufacturer’s
protocols. Call Moog Videolarm for more information
© 2011, Moog Videolarm, Inc. All Rights Reserved
Product and company names listed are trademarks or trade names of their respective companies.
AD/AP8C-9, AD/AP16CH2, AP16CH1_
AD/AP8C-9, AD/AP16CH2, AP16CH1 _
Fixed Tubular Camera Housing:
AD8C-9
Dust proof outdoor housing, 24Vac input.
Three liquid tight ttings for wiring
AP8C-9
Pressurized outdoor housing, 24Vac input
SPECIFICATIONS:
Camera Specications
Image Sensor:
Output:
Number of Effective Pixels:
Resolution:
Lens:
Digital Zoom:
Angle of View:
Minimum Illumination Color:
B&W:
S/N ratio:
Electronic Shutter:
White Balance:
Automatic Gain Control:
Iris Control:
Backlight Compensation:
Focusing System:
Low Light IR Mode:
PriVacy Zone:
Environmental Specications
Operating Temperature:
Electrical Specications (AD-AP8C-9)
Power Input:
Power Consumption:
Electrical Specications (AD-AP16CH2)
Power Requirements:
Camera:
Heater:
Total:
¼” interline transfer CCD
NTSC
Approx. 380,000 pixels
470 (H) x 400 (V) TV lines
23x optical (f=3.6mm - 82.8mm)
10x (230x with optical zoom)
(H) 54° (wide) to 2.5° (tele)
3 lux @ 1/60s, .2 lux @ 1/4s
0.02 lux (1/4s, IR cut lter removed)
50 dB
Auto/Manual (manual 1/2s - 1/30000s)
Auto/Manual
Auto/Manual (-3 to 28 dB, 16x 2 dB steps)
Auto/Manual
On/Off
Auto/Manual
Auto/Manual
On/Off
-40ºF to 122ºF (-29°C to 49°C)
24Vac, 50/60 Hz
18W (750mA)
24Vac
Power Consumption
5W (208mA)
10W (417mA)
15W (625mA)
Tubular Camera Housing:
AP16CH2
16” dust-proof tubular housing, 24Vac input.
Includes an integrated heater/defogger MCL 16”
(Maximum Camera Length)
AP16CH1
Pressurized outdoor housing,115Vac input
AD16CH2
Dust proof outdoor housing with heater, 24Vac input
AD8C-9:
AP8C-9:
AD16CH2:
AP16CH2:
The AD8C-9 environmental, dust free housing is constructed from .16” (4mm) thick aluminum. The
camera housing is designed to prevent dust from entering the unit. Chemically strengthened glass
has been used for the faceplate. Three liquid tight ttings (2 NPT ½” and 1 NPT 3/8”) are included
for cable entry. The camera has a xed high resolution color with 23x zoom, auto iris lens. The
camera has a horizontal resolution of 470 horizontal TV lines. Input power 24Vac. A camera cradle
assembly allows easy installation and access to the camera and internal equipment. An integral
heater/defogger is standard in each unit and is mounted to the camera cradle to allow heat transfer to
the window to minimize fogging in high humidity and/or freezing under cold temperature conditions.
The temperature range -40˚F to 120˚F. An aluminum sunshield is available as a separately boxed
items. This unit is FCC Part 15 approved.
The AP8C-9 environmental, pressurized housing is constructed from .16” (4mm) thick aluminum.
The camera housing has been sealed on both ends by radial pressure O-rings to create a tight seal.
Front to back motion is prevented by a retaining ring in the front and screws in the back. Chemically
strengthened glass has been used for the faceplate. The housings contain a single corrosion resistant
connector for power, video, and external sync, and a mating connector is provided for the camera.
The xed high resolution color camera has a 23x zoom, auto iris lens. The camera has a horizontal
resolution of 470 horizontal TV lines. Input power 24Vac. A camera cradle assembly allows for easy
installation and access to the camera and internal equipment. The housings is tted with a standard
Schraeder valve for pressurization with 5 Lbs. positive pressure of dry nitrogen. An over pressurization
safety relief valve has been mounted on each unit. An integral heater/defogger is standard in each
unit mounted to the camera cradle to allow heat transfer to the window to minimize fogging in high
humidity and/or freezing under cold temperature conditions. The temperature range -40˚F to 120˚F.
An aluminum sunshield is available as a separately boxed items. This unit is FCC Part 15 approved.
The VideoKit™ AD16CH2 environmental, dust free housing is constructed from .16” (4mm) thick
aluminum. The camera housing is designed to prevent dust from entering the unit. Chemically
strengthened glass used for the faceplate. Three liquid tight ttings (2 NPT ½” and 1 NPT 3/8”)
is included for cable entry. A xed high resolution color camera included, and features an auto iris
5-50mm lens. A camera cradle assembly is included to allow easy installation and access to the
camera and internal equipment. An input power of 24Vac. An integral heater/defogger is standard
in each unit and is mounted to the camera cradle to allow heat transfer to the window to minimize
fogging in high humidity and/or freezing under cold temperature conditions. The temperature range
shall be -40˚F to 120˚F. An aluminum sunshield is available as a separately boxed items.
The AP16CH2 environmental, pressurized housing shall be constructed from .16” (4mm) thick
aluminum. The camera housing shall be sealed on both ends by radial pressure O-rings to create a
tight seal. Front to back motion shall be prevented by a retaining ring in the front and screws in the
back. Chemically strengthened glass shall be used for the faceplate. The housings shall contain a
single corrosion resistant connector for power, video, and external sync, and a mating connector shall
be provided for the camera. A camera cradle assembly shall be included to allow easy installation
and access to the camera and internal equipment. The housings are tted with a standard Schraeder
valve for pressurization with 5 Lbs. positive pressure of dry nitrogen. An over pressurization safety
relief valve shall be mounted on each unit. An integral heater/defogger shall be standard in each unit
and shall be mounted to the camera cradle to allow heat transfer to the window to minimize fogging
in high humidity and/or freezing under cold temperature conditions. The temperature range shall be
-40˚F to 120˚F. An aluminum sunshield shall also be available as a separately boxed items.
ACCESSORIES:
VLAY8
Sunshield
Engineering Specications
VLAY16
Sunshield
WM1600
Wall Mount for all
tubular housings
500-702 12-12-2011
Moog Videolarm, 2525 Park Central Boulevard, Decatur, GA 30035 USA 1.800.554.1124 www.videolarm.com
Loading...