Moog 914-GBE BROCHURE

Fiber Optic Multiplexers

914-GBE

Gigabit Ethernet (GbE) Media Converter

Description

The Model 914-GBE Gigabit Ethernet Media Converter converts 10/100/1000Base-T Ethernet from a single RJ-45 to optics, and vice versa, all within a small, credit-card size form-factor. The 914-GBE may be used as a standalone card or optically integrated into a 914 system stack via CWDM modules. Optical power budgets are typically

20-26 dB over 10 km of singlemode ber. Diagnostics are provided

by on-board LEDs for power, optical, and data link status. A 12-pin header is also provided to drive LED diagnostics on a front panel or enclosure of a system.

Features

• Low Latency (no switch buffer delays)

• Compatible with 10/100/1000 Mbps copper links per IEEE 802.3

• Wavelength selectable/interchangeable SFP transceivers

• Rugged design for marine environment, including 6000 psi

pressure tolerant version

Benets

• Provides fast response for time-critical links

• Backwards compatible with legacy 10/100 Mbps links

• Supports a wide range of optical options, including CWDM wavelengths for combining multiple cards on a single optical ber

Typical Applications

• Remotely Operated Vehicles (ROVs) and Tether Management Systems

• Pipe Inspection Robots

• Bomb Disposal Robots

• Video Security Systems

• Tactical Networks and Defense Systems

• Industrial Process Control

Moog Components Group, Halifax Operations

77 Frazee Avenue, Dartmouth, Nova Scotia, Canada B3B 1Z4

www.moog.com/marine • email: mcg@moog.com

• 888-302-2263 • +1-902-468-2263 • Fax +1-902-468-2249

Fiber Optic Multiplexers

Data

No. of Channels 1

Ethernet 10/100/1000BASE-T Ethernet

meets 802.3 ab

Total Throughput Up to 1000 Mbps

Options Half Duplex 10/100 Mbps Ethernet

also supported

Optical

Optical Fiber 1 - 2 singlemode (9/125 um)

Data Rate 1.25 Gbaud uplink and downlink

Wavelengths 1310 nm uplink, 1550 nm downlink

(standard), CWDM options available

Flux Budget 20 dB standard (others available)

Options No SFP, 1310/1550 nm or CWDM

wavelengths for combining multiple model

systems on one singlemode ber

Electrical

Power Supply +5 VDC +/-10% regulated input required

Power Used 4 W typical, per end

Protection Overvoltage and reverse polarity

protection, fused

Mechanical

Dimensions See drawing below

Weight 90 g (0.2 lb)

Enclosures Contact Moog for custom enclosures

LED On-board diagnostic LEDs including: power,

receive optical link valid, Tx and Rx activity, copper link speed and duplex

Connectors

Optical Dual LC (SFP)

Ethernet RJ45

Power 1 x 2-pin Molex

Diagnostic 12-pin 0.1 inch header

Environmental

Temperature -20 to +60 °C (operational)

-40 to +85 °C (storage)

Humidity 85% relative, non-condensing

Pressure 1 atm or 6 k psi versions

Shock 30 g, 11 ms, per ISO 13628-6 Q1 level

Vibration 5 g, 25 - 1000 Hz, per ISO 13628-6 Q1 level

914-GBE Dimensions

Dimensions in inches [mm]