MOOER Little Monster BM User Manual

Warning

Owner's Manual

Precautions

* PLEASE READ CAREFULLY BEFORE PROCEEDING *

Power Supply

Please connect the designated power cable to an AC outlet of the correct voltage. Unplug the power cable when not using or during electrical storms.

Connections

Always turn off the power of this and all other equipment before connecting or disconnecting, this will help prevent malfunction and / or damage to other devices. Also make sure to disconnect all connection cables and the power cord before moving this unit.

Location

To avoid deformation, discoloration, or other serious damage, do not expose this unit to the following conditions:

Direct sunlight Heat sources Magnetic fields Extreme temperature or humidity Excessive dusty or dirty location High humidity or moisture Strong vibration or shock

The lightning flash with arrowhead symbol with in a n eq ui la te ra l triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the p ro du ct ’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilatera l tr ia ng le i s in te nd ed to alert the user to the presence of important operating and maintenance (servicing) instructions in the li te ra tu re accompanying the product.

Before Using

Please make sure the tubes are all still installed firml y be fo re u si ng Little Monster BM, in case they get loose during transportatio n.

Features

Connections

FUSE

Power Cable

Guitar Cabinet

Interference with other electrical devices

Radios and televisions placed nearby may experience reception interference. Operate this unit at a suitable distance from radios and televisions.

Cleaning

Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth. Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solvents, cleaning fluids, or chemical-impregnated wiping cloths.

Handling

Do not apply excessive force to the switches or controls. Do not let paper, metallic, or other objects into this unit. Take care not to drop the unit, and do not subject it to shock or excessive pressure.

Extreme tiny all-tube guitar amplifier head

Sound extraordinary nearly to Fender® Bassman® * NORMAL/BRIGHT channel select THIN/MELLOW tone control GAIN and VOLUME controls 8Ω/16Ω speaker out select Full metal construction

[* Bassman® is a famous amplifier model of Fender® Musical Instruments Corporation., the mentioned manufacturer a nd p ro du ct names are trademarks or registered trademarks of their res pe ct iv e owners, the trademarks were used merely to identify the so un d character of this product]

Warning: Always keep all the knobs at minimum while connecting guitar

and speakers.

Panel Instruction

Rear Panel

Tube Replacement

Specifications

Front Panel

POWER Switch and LED: Turn on or turn off the gear,

LED indicates the status.

Warning: Always connect Speaker Out to the cabinet with a speaker cable before turn on the power.

VOLUME Knob: Adjust the master volume of the amplifier.

GAIN Knob: Adjust the gain of the amplifier.

BRI GHT

SPEAKER OUT Jack: Connect to the cabinet (speaker).

Warning: Never switch the amplifier on without a loudspeaker connected.

8Ω/16Ω Selector: Choose the output impedance corresponding

the speaker.to

Warning: Always ensure the extension cabinet used is of the correct impedance.

Power Input: For connecting electricity here with the supplied

power cable.

Use the accessorial wrench to unlock all the bolts and take down the metal cover.

Replace the tubes with correct type and

install them to the right socket.

6V6G T

FUS E

Warning: Before replacing tubes, the power must be turned off.

Warning: Vacuum tubes will get very hot during working, please make

sure they are cooling before replacing, in case of getting scalded.

ECC8 1(12AT 7) ECC83 (12AX 7)

Power Output: Preamp Tube: Power Tube: Power Requirements:

Dimensions: Weight: Accessories:

* Disclaimer: Any specification’s update won't be amended in this manual.

5 Watts

ECC83 (12A 7) x 1, ECC81(12AT7) x 1X

6V6GT x 1

100~120V 50/60Hz

FUSE: T1AL/250V

220~240V 50/60Hz

FUSE: T0.5AL/250V

120mm (D) x 193mm (W) x 105mm (H)

2.55 Kg

Power Cable, Owner’s Manual, Transport Bag,

Wrench

Fuse Replacement

FUS E

Tone Switch: Switch between THIN mode and MELLOW mode.

THIN - A bit more bright and shining sound. MELLOW - A little plump and fat sound.

Channel Switch: Switch between NORMAL channel and

BRIGHT channel.

NORMAL - Basic characteristic sound of Little Monster BM. BRIGHT - More gain will be obtained in this channel and the

high band frequency will be increased a little bit.

INPUT Jack: 1/4” mono audio jack, for connecting the guitar.

Warning: Always use the supplied power cord, if a replacement is

required, please contact your authorized dealer.

Fuse: Protects the amplifier from electrical fault.

Warning: Never attempt to bypass the fuse or replace it of incorrect

values.

The Fuse provides amplifier circuit protection, please read carefully before

you replaced it.

Warning: Always replace a fuse with one of the specific rating and type printed on the fuse holder. Never install a fuse of a higher rating thanas value printed on the back of your amplifier and Specifications.the

Warning: Always turn off the power before replacing fuse.

MOOER AUDIO CO.,LTD

www.mooeraudio.com