JET ENGINE
Digital Flanger Pedal
Precautions
PLEASE READ CAREFULLY BEFORE PROCEEDING
Power Supply
Please connect the designated AC adapter to an AC outlet of the correct voltage. Please be sure to use only an AC adapter which supplies 9V DC,,center negative. Unplug the AC power adapter when not in use or during electrical storms.
Connections
Always turn off the power of this and all other equipment before connecting or disconnecting, this will help prevent malfunction and / or damage to other devices. Also make sure to disconnect all connection cables and the power cord before moving this unit.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception interference. Operate this unit at a suitable distance from radios and televisions.
Location
To avoid deformation, discoloration, or other serious damage, do not expose this unit to the following conditions:
Direct sunlight
Magnetic fields
Excessive dusty or dirty location
Strong vibrations or shocks
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired operation
Main Features
Digital multi-frequency Flanger
Two different Flanger modes
Tap Tempo functionality
Full metal housing
True bypass switching
Pedal layout
6
1.Footswitch
Engages and disengages
3the effect Press and hold to engage
4 |
5 |
"extreme feedback" special effect |
DEPTH |
LEVEL |
2.LED |
WIDTH |
||
|
|
Displays the on/off status of the |
|
|
pedal. Tap the button once to change |
7 |
8 |
Flanger mode. |
|
3.LEVEL |
|
|
|
Adjusts the volume/mix of the effect |
|
RATE |
4.DEPTH |
9
H.FLANGER B.FLANGER
JET ENGINE
8.INPUT:
Adjusts the depth and intensity of the effect.
5.WIDTH
Adjusts how wide the frequency range of the effect is
6.DC IN
Input for power supply, use a 9V DC regulated power supply
7.RATE
Adjusts the speed of the effect
1/4” audio jack for connecting to the input device or instrument
9.OUTPUT:
1/4” audio jack, effect output for connection to amp or other devices
Modes H.Flanger and B. Flanger
Input 1/4” mono audio jack. Impedance: 470k Ohms
Output 1/4” mono audio jack Impedance: 100 Ohms
Power requirements: AC adapter 9V DC , center negative.
Highly recommend to use Mooer Micro Power.
Current Draw: 160mA
Dimensions 93.5mm(D) x 42mm(W) x 52mm(H)
Weight 146g
Accessories Owner’s Manual
* Disclaimer: Any specification’s update won't be amended in this manual.
Part No:620010631