MOOER E-lady User Manual

Normal: Normal flanger mode, undulating electricity sound.
Filter: Freeze the flanging effect, create a static filter sound.

Analog Flanger Pedal

Precautions

Pow er Su ppl y

Please connect the designated AC adapter to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies 9V (±10%) DC, center
minus. The ma xim um wo rki ng vo lta ge sh all n ot ex cee d 12V, otherwise may be
dangerous equipment damage, fire or other problems.
Unplug the AC power adapter when not using or during electrical storms.

Con nec tions

Always turn off th e pow er of t his a nd al l oth er eq uip men t bef ore c onn ect ing o r
disconnecting, this will help prevent malfunction and / or damage to other devices.
Also make sure to disconnect all connection cables and the power cord before
moving this unit.

Cle aning

Clean only with a soft, dry cloth. If necessary, sli ght ly mo ist en th e clo th.
Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solve nts ,
cleaning fluids, or chemical-impregnated wiping cloths.

Int erf erence with othe r electrical devices

Radios and televisions placed nearby may experience reception interfe ren ce.
Ope rate this unit at a suitable distance from radios and televisions.

Loc ati on

To avoid deformation, discoloration, or other serious damage, do not expose
this unit to the following conditions:

Direct sunlight
Magnetic fields
Exc essive dusty or dirty location
Str ong vibrations or shocks

FCC c ertification

Thi s device complies with Part 15 of the FCC Rules. Operation is subject
to th e fol lowing two conditions:
T his d evi ce ma y not c aus e har mfu l int erf ere nce .
This devi ce must accept any int erfere nce receiv ed, includ ing interf erence
tha t may c aus e undesired operation.

PLE ASE READ CAREFULLY BEFORE PROCEEDING

Heat sources
Ext reme temperature or humidity
High humidity or moisture

Main Features

 Classic analog flanger sound with filter mode and oscillator effects
 2 Working Modes: Normal/Filter
 Full metal shell
 Very small and compact design
 True bypass switch
 DC 9V adapter power supply

3

1. TRUE BYPASS Footswitch:

Push down the footswitch to toggle

6

7

9

5

7. COLOR Knob: Adjusts the feedback of flanger.
Note: Setting the COLOR knob at its most clockwise point could cause an

oscillator noise tone, this is normal, use this special sound to create
unique effects!

8. RANGE Knob: Adjusts the limit range of sweeping scope in Normal
mode and manually adjusts the filter matrix in Filter mode.
The sweeping range will get larger when clockwise turning.

9. RATE Knob: Adjusts the speed of flanger in Normal mode.
It will be disengaged in Filter mode.

between on and bypass status.

8

2. ON/OFF LED:

Shows the on/off status of

Eleclady , when the LED
is lit the effect is engaged.

3. DC IN Power Jack:

4

For power supply, use a 9-volt

DC regulated AC adapter (plug
polarity is positive on the barrel
and negative in the center).

4. INPUT Jack:
1/4” mono audio jack, for

connecting guitar.

5. OUTPUT Jack:

1/4” mono audio jack, outputs

the signal.

6. Mode Switch:

Switch between Normal mode and
Filter mode.

Working Modes: 2 (Normal, Filter)
Input: 1/4” monaural jack (impedance: 1M Ohms)
Output: 1/4” monaural jack (impedance: 510 Ohms)
Power R equir ement s: AC a dapte r 9V DC (ce nter mi nus p lug),

recom mende d to use Mo oer M icro Po wer

Current Draw: 10 mA
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight: 160g
Accessories: Owner’s Manual

* Disclaimer: Any specification’s update won't be amended in this manual.