Montigo Proflame 2 Maintance Manual
Operation & Maintenance Manual
Proame 2
System
NOTICE
Read these instructions before use.
WARNING
Do not operate in presence of water dripping, spraying, rain, etc.
CAUTION
Property Damage Hazard. Excessive heat can cause property damage.
The appliance can stay lit for many hours. Turn off the appliance if it is not going
be attended for any length of time.
.
WARNING
When installing the replace - gas lines, ttings,
accessories or any other objects cannot impede the
proper movement of the door buckles.
ATTENTION
- Turn OFF the main gas supply of the appliance during installation or
maintenance of the receiver device.
- Turn OFF main gas supply to the appliance prior to removing ro reinserting the
batteries.
- In case of remote control malfunction turn OFF the IFC device using the On/Off
main switch.
- For installation / maintenance switch OFF the IFC device by removing main
power supply plug and disconnect.
WARNING
FIRE HAZARD. Can cause severe injury or death. The Transmitter and IFC
device causes ignition of the appliance. The appliance can turn on suddenly.
Keep away from the appliance burner when operating the remote system or
activating manual bypass of the remote system.
®
.
XG0677 141231
Canadian Heating Products Inc. Langley, BC V4W 4A1 | Montigo Del Ray Corp. Ferndale, WA 98248
C US
Proame 2 Transmitter
Operation
The Proame 2 System consists of the
following elements:
1. Pilot Assembly
2. Proame Gas Valve.
3. Proame 2 Control Module
4. Wiring Harness
5. Variable Speed comfort fan *
6. Accent Lights *
7. Proame 2 remote control
8. Battery Pack (not applicable for power vented units)
9 Manual override switch
* Not available on all replace models. Refer to the
replace instruction guide for available features.
The Proame 2 Transmitter controls the
following replace functions:
1. Main Burner On/Off
2. Main Burner ame modulation (6 levels).
3. Choice of standing or intermittent pilot (CPI/IPI).
4. Thermostat and Smart thermostat functions.
5. Accent light On/Off.
6. Comfort fan speed modulation (6 levels).
The Proame 2 Transmitter uses a streamline design with
a simple button layout and informative LCD display, see
gure 1. A Mode Key is provided to index between the
features and a Thermostat Key is used to turn On/Off or
index through Thermostat functions, see gure 1 & 3.
Additionally, a Key Lock feature is provided, see gure 15.
IMPORTANT
The Proflame Transmitter 2 is an integrated part of the Proflame 2 System,
which consists of these elements:
- Proflame 2 Transmitter, to be used in conjunction with:
- Integrated Fireplaces Control (Proflame 2 IFC)
WARNING
Do not expose remote control to temperatures below 0°C (32°F) or above 50°C (122°F)
.
Page 2
XG0677 - 141231
Blue Back lit LCD display
On/Off Key
Thermostat Key
Up/Down Arrow Key
Figure 1. Proame Remote Control
Proame 2 Transmitter
Operation
Mode Key
SW1
LED1
LED2
SW1 = Programing Button
LED1 = Red Diagnostic Light
LED2 = Amber Programing Remote Control Light
Figure 2. Proame Control Module
XG0677 - 141231
Page 3
Loading...