CAUTION: Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have resulted during
shipping. If there is a defect in the wire, do not attempt
installation. Please call our Customer Service Team at
1-800-446-9092.
WARNING: Before starting installation of this fixture or
removal of a previous fixture, disconnect the power by
turning off the circuit breaker or by removing the fuse at the
fuse box.
Warranty
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of one (1) year from
date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If
this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the
product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed,
set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of
the product as a result of an accident, misuse, abuse, negligence,
material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as
this is considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether express or
implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability
and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved
in the replacement or repair of said product.
Contact the Customer Service Team at 1-800-446-9092.
alteration, faulty installation, or any other failure not relating to faulty
MONTEAUX LIGHTING
2
Please contact 1-800-446-9092 for further assistance.
™
Page 3
Pre-Installation
PLANNING INSTALLATION
Read all instructions before installation.
To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard.
Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
Ladder
Safety
glasses
Electrical
tape
Phillips
screwdriver
screwdriver
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
PliersFlat blade
Wire
strippers
AA BB
PartDescriptionQuantity
AA 1
BBMounting screw2
CCWire nut3
DDCap nut1
Mounting unit
CCDD
MONTEAUX LIGHTING
3
Please contact 1-800-446-9092 for further assistance.
™
Page 4
Pre-Installation (continued)
Pre-Installation (continued)
PACKAGE CONTENTS
A
B
PartDescriptionQuantity
A 1
B1
Light fixture
Shade
4
Please contact 1-800-446-9092 for further assistance.
MONTEAUX LIGHTING
™
Page 5
Installation
Attaching the mounting unit to the
1
junction box
Attach the mounting unit (AA) to the junction box (not
included) with mounting screws (BB).
AA
BB
Making the electrical connections
2
Connect the copper wire from the light fixture (A) to the
mounting unit (AA) by securing it with the pre-installed
ground screw.
Connect the black to black (power), the white to white
(neutral), and copper wire to ground wire with the wire
nuts(CC) and secure the wire nuts (CC) with electrical
tape (not included).
NOTE: If the wires from the fixture are the same color,
attach the side with markings or letters to the black
(positive) wire and the other to the white (neutral) wire.
Securing the light fixture to the
3
junction box
Secure the light fixture (A) to the junction box by placing it
over the mounting bracket (AA) and secure it with the cap
nut (DD).
CC
AA
A
A
AA
DD
Assembling the Light Fixture
4
Secure the shade (B) to the light fixture (A) by screwing it on
clockwise.
A
B
MONTEAUX LIGHTING
5
Please contact 1-800-446-9092 for further assistance.
™
Page 6
Operation
1
Care and Cleaning
Turning the light on
Turn the light switch on to activate the fixture.
Clean the lamp with a soft, dry cloth.
Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Problem Possible Cause Solution
The bulb will not light. The power is off. Ensure the power supply is On.
Check the wiring. There is a faulty wire connection.
Ensure the circuit breaker is in the On position. The circuit breaker is off.
Check the wire connections. The fuse blows or circuit
Contact a qualified electrician or call the Customer Service Team at
1-800-446-9092.
breaker trips when the
light is turned on.
There are crossed wires or the
power wire is grounding out.
6
Please contact 1-800-446-9092 for further assistance.
MONTEAUX LIGHTING
™
Page 7
Questions, problems, missing parts? Before returning to the store,
call Monteaux Lighting
™
Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-800-446-9092
Retain this manual for future use.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.