Montarbo FiveO RMD801, FiveO RMD801BH Owner's Manual
RMD801 Kit
RMD801BH Kit
WIRELESS MICROPHONE
EN OWNER’S MANUAL
RMD801 - RMD801BH
INTRODUCTION
First of all, thank you for choosing a product FiveO Montarbo®. The system is the delicately designed UHF, PLL synthesized
system, with antenna for smart switching diversity control, the higher level RF signals maybe fed into the system for greater
reliability and coverage, therefore, the risks of break down and interference are to be effectively reduced.
The system features as follows:
- Switching diversity control to receive the RF signal;
- LED indication for RF, AF and POWER;
- PLL synthesized design, 100 channel frequency presets;
- Consistent operating frequencies to comply with the EMC regulations;
- Transmitter battery: Two 1.5 V, convenience operation;
- The balance and the un-balanced audio output, connect each king of acoustic equipment easily.
For further information about your RMD801, please check our website www.montarbo.com
Owner’s manual | RMD801 - RMD801BH
2
CONTENTS
Introduction 2
Contents 3
Safety Related Symbols 4
Warning 4
Important Safety Instructions 5
Description 6
Receiver 7
Handheld Transmitter 8
Bodypack Transmitter 9
Operating Instruction 10
Technical Specifications 11
PACKAGE CONTENTS RMD801 Kit - Cod. 5O05042
Receiver RMD840
Handheld Trasmitter RMD810
Owner’s manual
Warranty certificate
PACKAGE CONTENTS RMD801BH Kit - Cod. 5O05043
Receiver RMD840
Bodypack Trasmitter RMD820
Headset Microphone RMD830
Owner’s manual
Warranty certificate
RMD801 - RMD801BH | Owner’s manual
3
RMD801 - RMD801BH
SAFETY RELATED SYMBOLS
The symbol is used to indicate that some hazardous
live terminals are involved within this apparatus,
even under the normal operating conditions.
The symbol is used in the service documentation
to indicate that specific component shall be only
replaced by the component specified in that.
Documentation for safety reasons:
Protective grounding terminal.
Alternating current/voltage.
Hazardous live terminal.
ON Denotes the apparatus turns on.
OFF Denotes the apparatus turns off, because of using
the single pole switch, be sure to unplug the AC
power to prevent any electric shock before you pro
ceed your service.
WARNING
CAUTION
Describes precautions that should be observed to
prevent the danger of injury or death to the user.
Disposing of this product should not be placed in
municipal waste and should be separate collection.
Describes precautions that should be observed to
prevent danger of the apparatus.
WARNING
• Power Supply
Ensure the source voltage matches the voltage of the power
supply before turning ON the apparatus.
Unplug this apparatus during lightning storms or when un
used for long periods of time.
• External Connection
The external wiring connected to the output hazardous live
terminals requires installation by an instructed person, or the
use of ready-made leads or cords.
• Do not Remove any Cover
There are maybe some areas with high voltages inside, to
reduce the risk of electric shock, do not remove any cover if
the power supply is connected.
The cover should be removed by the qualified personnel only.
No user serviceable parts inside.
• Fuse
To prevent a fire, make sure to use fuses with specified
standard (current, voltage, type). Do not use a different fuse
or hort circuit the fuse holder.
Before replacing the fuse, turn OFF the apparatus and dis
connected the power source.
• Protective Grounding
Make sure to connect the protective grounding to prevent any
electric shock before turning ON the apparatus.
Never cut off the internal or external protective grounding
wire or disconnect the wiring of protective grounding termi
nal.
• Operating Conditions
This apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, shall
be placed on this apparatus.
-
-
-
Owner’s manual | RMD801 - RMD801BH
4
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
Do not use this apparatus near water. Install in accordance
with the manufacturer’s instructions. Do not install near any
heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat. Do not
block any ventilation openings.
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions.
• Follow all instructions.
• Keep these instructions.
• Heed all warnings.
• Only use attachments/accessories specified by the manufacturer.
• Power Cord and Plug
Do not defeat the safety purpose of the polarized or grounding
type plug.
A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety.
If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched par
ticularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
-
• Cleaning
When the apparatus needs a cleaning, you can blow off dust
from the apparatus with a blower or clean with rag etc.
Don’t use solvents such as benzol, alcohol, or other fluids with
very strong volatility and flammability for cleaning the appara
tus body. Clean only with dry cloth.
-
FCC Rules and Regulations
MARKUS wireless receivers are certified under FCC Rules part
15 and transmitters are certified under FCC Rules part 74. Li
censing of MARKUS equipment is the user’s responsibility and
licensability depends on the user’s classification, application
and frequency selected.
-
NOTE
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to Part 15 of the
FCC Rules.These limits are designed to provide reasonable
protection against harmful interference in a residential instal
lation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interfer
ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interfer
ence by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
-
-
-
• Servicing
Refer all servicing to qualified personnel. To reduce the risk
of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are quali
fied to do so.
Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
The mains plug is used as the disconnect device, the discon
nect device shall remain readily operable.
Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
-
-
This device complies with Part 15 of the FCC Rules. Opera
tion is subject to the following two conditions: (1) this device
may not cause harmful interference and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Montarbo
pliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
®
declares that this wireless microphone is in com-
RMD801 - RMD801BH | Owner’s manual
-
5
Loading...