Montarbo FiveO RMD2400, FiveO RMD2400HD Owner's Manual

RMD2400 Kit
RMD2400HD Kit

WIRELESS MICROPHONE

EN OWNER’S MANUAL

RMD2400 - RMD2400HD

INTRODUCTION

First of all, thank you for choosing a product FiveO Montarbo®. The RMD2400 works in ISM 2.4 GHz free band. With the
intelligent frequency hopping it can help to avoid interference effectively and ensure the working quality. It is intelligent
as it can mute automatically in bad channel quality or high error code rate. It uses the GFSK to be digital modulation/
demodulation. It can memorize the matched devices and one RMD2440 receiver can match with several RMD2410 and
RMD2420 transmitters though only one RMD2410 or RMD2420 transmitter can be used once. The transmit distance is more
than 25 meters in open space. It is suitable for using in KTV, home, classroom, conference and other audio equipment.

The system features as follows:

- Operating Band: ISM 2.4 GHz free band;

- GFSK digital modulation/demodulation;

- Intelligent Frequency Hopping;

- Automatic mute in bad channel quality or high error code rate;

- Memorize matched devices;

- One receiver can match with several transmitters though one transmitter can be used at once;

- More than 25 meters transmit distance in open place;

- Power/pairing status indicator;

- Apply to KTV, home, classroom, conference, audio equipment.

For further information about your RMD2400, please check our website www.montarbo.com

Owner’s manual | RMD2400 - RMD2400HD

2

CONTENTS

Introduction 2
Contents 3
Safety Related Symbols 4
Warning 4
Important Safety Instructions 5
Description 6
Receiver 7
Handheld Transmitter 8
Bodypack Transmitter 9
Pairing Instruction 10
Technical Specifications 10

PACKAGE CONTENTS RMD2400 - Cod. 5O05040

Receiver RMD2440
Handheld Trasmitter RMD2410
Owner’s manual
Warranty certificate

PACKAGE CONTENTS RMD2400HD - Cod. 5O05041

Receiver RMD2440
Bodypack Trasmitter RMD2420
Headset Microphone RMD2430
Owner’s manual
Warranty certificate

RMD2400 - RMD2400HD | Owner’s manual

3

RMD2400 - RMD2400HD

SAFETY RELATED SYMBOLS

The symbol is used to indicate that some hazardous
live terminals are involved within this apparatus,
even under the normal operating conditions.

The symbol is used in the service documentation
to indicate that specific component shall be only
replaced by the component specified in that.

Documentation for safety reasons:

Protective grounding terminal.

Alternating current/voltage.

Hazardous live terminal.

ON Denotes the apparatus turns on.

OFF Denotes the apparatus turns off, because of using

the single pole switch, be sure to unplug the AC
power to prevent any electric shock before you pro
ceed your service.

WARNING

CAUTION

Describes precautions that should be observed to

prevent the danger of injury or death to the user.

Disposing of this product should not be placed in
municipal waste and should be separate collection.

Describes precautions that should be observed to

prevent danger of the apparatus.

WARNING

• Power Supply

Ensure the source voltage matches the voltage of the power
supply before turning ON the apparatus.
Unplug this apparatus during lightning storms or when un
used for long periods of time.

• External Connection

The external wiring connected to the output hazardous live
terminals requires installation by an instructed person, or the
use of ready-made leads or cords.

• Do not Remove any Cover

There are maybe some areas with high voltages inside, to
reduce the risk of electric shock, do not remove any cover if
the power supply is connected.

The cover should be removed by the qualified personnel only.
No user serviceable parts inside.

• Fuse

To prevent a fire, make sure to use fuses with specified
standard (current, voltage, type). Do not use a different fuse
or hort circuit the fuse holder.
Before replacing the fuse, turn OFF the apparatus and dis
connected the power source.

• Protective Grounding

­Make sure to connect the protective grounding to prevent any
electric shock before turning ON the apparatus.
Never cut off the internal or external protective grounding
wire or disconnect the wiring of protective grounding termi
nal.

• Operating Conditions

This apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, shall
be placed on this apparatus.

-

-

-

Owner’s manual | RMD2400 - RMD2400HD

4

To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.

Do not use this apparatus near water. Install in accordance
with the manufacturer’s instructions. Do not install near any
heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat. Do not
block any ventilation openings.

No naked flame sources, such as lighted candles, should be
placed on the apparatus.