Montarbo F12P4Sx, F12P4Dx, F12P8Sx, F12P8Dx, F12BiSx Specification
...
professional stage monitors
FLOOR series - professional stage monitorsPRELIMINARY 2011
F12BiSx
F12P8Sx
F12P
Available versions 4 ohm and 8 ohm with right and left versions
Woofer 12” woofer featuring a new-geometry neodymium magnetic circuit with flux demodulating rings,
weatherproof cone, large excursion 3” ventilated voice coil, variable-geometry cone surround
and centering spider
Driver 1” throat, 2.5” voice coil, neodymium magnet, titanium diaphragm
Horn 80° x 60° wave guide
Filter Second-order Bessel type crossover, without resonant cells, with protection against HF driver overload
Max SPL 130 dB
Output power 400 Watt AES - 750 Watt continuous program
Ideal combination with PLM3000
Cabinet Multiply birch, curved profile, anti-scratch surface coating
Dimensions (w x h x d) 60 x 30 x 49 cm
Weight 21 kg
Suggested applications voice, guitar, keyboard, percussions
F12P4Sx
F12P4Dx
F12P8Sx
F12P8Dx
F12BiSx
F12BiDx
F15P4Sx
F15P4Dx
F15P8Sx
F15P8Dx
F15Cx
F15CxBi
FLOOR series - professional stage monitorsPRELIMINARY 2011
The FLOOR series is the new line of Montarbo stage monitors designed to achieve on stage the same
excellent sound quality provided by the FoH products, i.e. the PalcoPlus line array system as well as
the Spot, Wide and Full series. The FLOOR design philosophy adheres rigorously to our ‘made in Italy’
standards of quality with absolutely no compromises tolerated when it comes to component
selection and concern with acoustic efficiency and tonal neutrality. The results ensure outstanding
accuracy when it comes to reproduction of vocals and all instruments, as well as plenty of headroom,
clearly superior intelligibility and extremely low vulnerability to feedback.
The extraordinarily shallow shape, comprehensive focus on design and wide choice of models and
versions make the FLOOR series suitable for any application and environment.
These stage monitors are equipped with 12” or 15” woofers and feature drivers loaded with
60° by 80° horns; they can all be driven by the PLM series powered processors.
They are available in both right (Dx) and left (Sx) versions in order to provide maximum flexibility
of use and control, capable of satisfying even the most demanding sound engineers.
Other options include nominal impedance (4 ohm or 8 ohm) and crossover (internal or for
bi-amplification). The models equipped with internal passive crossover are fitted with woofers
featuring 3” voice coils and they have been optimized for being driven by a PLM3000 powered
processor, while the models intended for bi-amplification have been fitted with woofers featuring
4” voice coils. In the latter case a PLM6800 powered processor is recommended.
Other than the asymmetrical models, the series also includes the F15Cx and F15CxBi models, both
equipped with a 15” coaxial speaker fitted with a 40° by 60° horn.
Model F15CxBi has been designed for bi-amping and is driven by a PLM6800 powered processor.
These monitors are extremely sturdy and suitable for touring thanks to the well-built cabinet with
its curved profile which is made possible by a single piece of 16 mm multiply board.
The special anti-scratch surface coating increases resistance and protection even under conditions
of hard use. The handles, recesses carved right into the speaker body itself, allow for a solid and
reliable 270° grip; these strategically placed cavities also house the Speakon® connectors (installed
on both sides of the cabinet), thus reducing the cabinet’s bulk and providing greater protection for
the connectors. In addition to the standard rubber feet, the cabinets are fitted with two adjustable
feet that make it possible to optimize the angle between the monitors and the stage floor, thus
allowing for better control of vertical directivity and mechanical decoupling from the stage floor,
in order to control low frequency feedback.
F12Bi
Available versions 8 ohm LF + 16 ohm HF with right and left versions
Woofer 12” neodymium magnet, 4” voice coil
Driver 1.4” throat, 3” voice coil, neodymium magnet, nitrided titanium diaphragm
Horn rotatable 80° x 60° wave guide
Max SPL 131 dB
Output power 800 + 100 Watt AES - 1600 + 200 Watt continuous program
Only use with PLM6800 (or LM24) dedicated preset
Cabinet Multiply birch, curved profile, anti-scratch surface coating
Dimensions (w x h x d) 66 x 30 x 49 cm
Weight 23.5 kg
Suggested applications voice, guitar, keyboard, percussions, bass, drums
F15P
Available versions 4 ohm and 8 ohm with right and left versions
Woofer 15” woofer featuring a new-geometry neodymium magnetic circuit with flux demodulating rings,
weatherproof cone, large excursion 3” ventilated voice coil, variable-geometry cone surround and
centering spider
Driver 1” throat, 2.5” voice coil, neodymium magnet, titanium diaphragm
Horn rotatable 80° x 60° wave guide
Filter built-in passive
Max SPL 132 dB
Output power 400 Watt AES - 750 Watt continuous program
Ideal combination with PLM3000
Cabinet Multiply birch, curved profile, anti-scratch surface coating
Dimensions (w x h x d) 74 x 37 x 58 cm
Weight 26 kg
Suggested applications voice, percussions, bass, drums
F15Cx
Impedance 8 ohm
Woofer 15”, 3” voice coil
Driver 3” voice coil, 60° x 40° coaxial horn
Max SPL 131 dB
Output power 400 Watt AES - 750 Watt continuous program
Filter built-in passive
Only use with PLM6800 (or LM24) dedicated preset
Cabinet Multiply birch, curved profile, anti-scratch surface coating
Dimensions (w x h x d) 63 x 37 x 58 cm
Weight 22 kg
Suggested applications voice, guitar, keyboard, percussions, bass
F15CxBi
Impedance 8 ohm LF + 16 ohm HF
Woofer 15”, 4” voice coil.
Driver 3” voice coil (dispersion 70° conical)
Max SPL 133 dB
Output power 850 + 100 Watt AES - 1600 + 200 Watt continuous program
Only use with PLM6800 (or LM24) dedicated preset
Cabinet Multiply birch, curved profile, anti-scratch surface coating
Dimensions (w x h x d) 63 x 37 x 58 cm
Weight 26 kg
Suggested applications voice, guitar, keyboard, percussions, bass
FLOOR series - professional stage monitorsPRELIMINARY 2011
Loading...