Assembly Instructions for Writing Desk
Thank you very much for purchasing our heirloom quality writing desk. Should you have any questions or need to
contact sales or support, please do not hesitate to contact our corporate offices at 888.889.3728 or via E-Mail at:
cs@montanawoodworks.com
Before beginning assembly please take a few moments to read the instructions carefully, understanding each step.
Likewise please also ensure that the hardware package contains the items as described here.
Tools Needed: 9/16” Wrench/Socket
Parts List: (1) Desk Top w/ Drawer, (4) Legs
Hardware List: (4) 5” Lag Bolts, (4) Washers
Assembly Directions:
Step 1. Lay desk top face down on a soft, non-marring surface.
Step 2. Place leg assembly in the corner of the desk top and align with pre-drilled hole .
Step 3. Insert and tighten a lag bolt with washer until snug. DO NOT OVERTIGHTEN!
Step 4. Repeat step 3 for remaining three legs.
Your new writing desk is now fully assembled. Enjoy!
PROUDLY MADE IN THE U.S.A.
Please Note: If you purchased your writing desk “ready to finish” special care must be taken to properly apply a high grade final
finish in a timely manner. Doing so will help protect your purchase from discoloration and damage caused by exposure to ultraviolet light. See use and care instructions for further information. Failure to adequately protect item by the applications of a final
finish may void warranty.
Loading...