Montague UFLC-18R Specifications
Item No. ___________________________
Heavy-Duty Gas
Underfired Broilers — Radiant
Project ___________________________
Quantity ___________________________
Style Range-Match Counter Models
UFLC-R Series
MODEL GUIDE
Model No. Overall Width Grates Cooking Area
UFLC-18R
UFLC-24R
UFLC-30R
UFLC-36R
UFLC-48R
UFLC-60R
UFLC-72R
18” (457 mm) 2 12” x 24” (305 x 610 mm)
24” (610 mm) 3 18” x 24” (457 x 610 mm)
30” (762 mm) 4 26” x 24” (660 x 610 mm)
36” (914 mm) 5 32” x 24” (812 x 610 mm)
48” (1219 mm) 7 44” x 24” (1117 x 610 mm)
60” (1524 mm) 9 56” x 24” (1422 x 610 mm)
72” (1829 mm) 11 68” x 24” (1727 x 610 mm)
Model UFLC-36R shown
SHORT/BID SPECIFICATIONS:
Broiler shall be a Montague Legend Heavy-Duty Range-Match Model:
M
UFLC- ____ R [Specify width]:
…a low-profile, countertop gas-fired unit with 19,000 BTU/hr stain-
less steel tubular burners with individual controls, heating heavy-duty
stainless steel radiant heat deflectors (radiants), with a full width debris
screen under burners; two-position, reversible cast iron ULTRA-FLOW top
grates with both flat (wide) and narrow ribbed side with grease troughs;
a full width front grease trough and large capacity grease container
located in cool zone; 6” (152 mm) front/plate rail, 1” (25 mm) high rear
flue riser and 4” (102 mm) stainless steel legs as standard; plus all the
features listed and options/accessories checked:
BURNER/RADIANT SYSTEM FEATURES:
• 19,000 BTU/hr stainless steel tubular burners
• Individual manual gas valves for zoned heat control
• Standing pilot for automatic ignition
• Heavy-duty stainless steel radiants glow red for infrared broiling
• Removable self-cleaning radiants
• Full width debris screen under burners
• Full width flare up reducing removable drip tray
• Radiants and drip tray heat shields reduce flare-ups
TOP-GRATE FEATURES:
• Reversible ULTRA-FLOW cast iron grate sections
• Ribbed side for narrow marking, with side grease troughs
• Flat side for broiling fish and wide marking
• 1” (25 mm) ribbed grate spacing for consistent grilling results
• Two-position grid frame for flat or 3” (76 mm) raised-rear grilling
• Sloped grates and side grate grease troughs to reduce flare-ups
STANDARD CONSTRUCTION FEATURES:
• Satin finish stainless steel front & top trim with 6” (152 mm) deep front
rail
• Other surfaces painted black with electrolytic zinc undercoating
• Full width front grease trough for easy transfer
• Removable large capacity grease container
• Stainless steel 1” (25 mm) rear flue riser (matches height of range risers)
• 4” (102 mm) adjustable stainless steel legs standard
• 1-1/4” NPT front gas manifold with ½ union on each end
STANDARD WARRANTY:
• One Year, Parts & Labor
AGENCY APPROVALS
• NSF Listed
• CSA Design Certified to ANSI Z83.11*CSA 1.8
HDB-1 [Rev. 10/10]
THE MONTAGUE COMPANY • 1830 Stearman Avenue, Hayward, CA 94545 • 800 345-1830 • Fax: 510 785-3342 • montaguecompany.com
Item No. ___________________________
Heavy-Duty Gas Underfired Broilers
— Radiant Style Range-Match Counter Models
UFLC-R Series
OPTIONS GUIDE:
General:
M
42” (1067 mm) unit depth (Suffix -40)
[Same grid size]
M
Equipment Stand — 24” high x 30-5/8” deep
(610 x 778 mm), with stainless steel front,
lower shelf & tubular legs with bullet feet
M
Casters — set of four/six 5” (127 mm) casters
M
Flex Connector Kit [1”] NPT:
M
3’ (914 mm) long M 4’ (1219 mm) long
M
15” (381 mm) High Back [Matches 18” (457 mm)
range back]
Grates, Radiants, Plate Shelves, Splash
Guards:
M
Seafood grates, cast iron
M
Round rod grates — 6” (152 mm) sections:
M
Hard chrome M Cold rolled steel
M
Scraper/cleaner for round rod grates
M
Cast iron radiants — in place of stainless steel
M
Wider Plate shelf:
M
9” (229 mm) M 11” (279 mm)
M
Plate Shelf Cutouts [for 11” (279 mm) only]:
Specify:
M
1/6 pans or M 1/4 pans or M 1/9
pans number: __ ea.
M
Removable splash guard, stainless steel
Project ___________________________
Quantity ___________________________
Dimensions in brackets are millimeters
Finish:
M
Stainless steel left side panel
M
Stainless steel right side panel
M
Stainless steel back panel
Manifolds: [Left rear, with pressure regulator]:
M
1” NPT
Manifold Cap:
M
left side M right side
Stainless Manifold Cover:
M
left side M right side
INSTALLATION REQUIREMENTS & SHIPPING INFORMATION
1. Broilers must be installed in accordance with local codes or in their absence with the National Fuel Gas
Code: ANSI Z22 3.1; Natural Fuel Gas Code: CAN/CGA-B149.1 or Propane Installation Code: CAN/CGAB149.2, as applicable. Compliance with codes is the responsibility of the Owner and Installer.
2. An adequate ventilation system is required. Refer to National Fire Protection Association Standard No. 96,
“Standard for Ventilation and Fire Protection of Commercial Cooking Operations.”
3. This appliance is intended for commercial use by professionally trained personnel. NOT intended for
Residential Use.
Minimum
Clearances
From Back Wall 0”
Left & Right Side 0”
For use in noncombustible locations only.
4. Specify installation elevation: _____________ if above 2000 feet (610 m).
5. GAS INLET SIZE (All Models): 1-1/4” NPT front manifold with 1/2 union on each end provided for battery con-
nection. A properly sized gas pressure regulator must be furnished by the Installer. With 1” rear inlets, a gas
pressure regulator is provided and must be installed (by others) when unit is connected to gas supply.
6. The incoming gas line pressure into the regulator should be 8”-14” w.c. for natural gas, and 12”-14” w.c.
for propane gas.
Specify Type of Gas:
Manifold Pressure: 6.0” WC 10.0” WC
Models: Burners BTU/hr (kW) BTU/hr (kW)
M Natural M Propane
Shipping
Weight
Shipping
Class
UFLC-18R 2 38,000 (11.1) 38,000 (11.1) 160 lbs (74 kg) 85 13/.4
UFLC-24R
UFLC-30R
UFLC-36R
UFLC-48R
UFLC-60R
UFLC-72R
4 76,000 (22.3) 76,000 (22.3) 220 lbs (100 kg) 85 13/.4
5 95,000 (27.8) 95,000 (27.8) 265 lbs (120 kg) 85 20/.6
6 114,000 (33.4) 114,000 (33.4) 305 lbs (138 kg) 85 20/.6
8 152,000 (44.5) 152,000 (44.5) 400 lbs (181 kg) 85 26/.7
11 209,000 (61.2) 209,000 (61.2) 495 lbs (224 kg) 85 35/1
13 247,000 (72.4) 247,000 (72.4) 590 lbs (267 kg) 85 38/1.1
Due to continuous product improvements, specifications are subject to change without notice.
Noncombustible
Construction
Cube
(Crated)
3/m3
ft
1830 Stearman Avenue, Hayward, CA 94545
800 345-1830 • Fax: 510 785-3342
www.montaguecompany.com
HDB-1 [Rev. 10/10]
Loading...