Montague UF-24R Specifications
Item No. ___________________________
Heavy-Duty Gas
Underfired Broilers – Radiant
Style Range Match Cabinet Base
Model UF-24R shown,
with optional lower warming rack
SHORT/BID SPECIFICATION
Broiler shall be a Montague Legend Heavy-Duty Range-Match Cabinet Base
Model:
M UF- ____ R [Specify width]:
…a gas-fired unit with 19,000 BTU/hr stainless steel tubular burners
with individual controls, heating heavy-duty stainless steel radiant heat
deflectors (radiants), with a full width debris screen under burners;
two-position, reversible cast-iron ULTRA-FLOW top grates with both flat
(wide) and ribbed sides (narrow with grease troughs); a full width front
grease trough and large capacity grease container located in cool zone;
6” (152 mm) front/plate rail, 5-9/16” (141 mm) high side and rear
grease splash mounted on a stainless steel cabinet base with 6” (152
mm) legs as standard; plus all the features listed and options/accessories
checked:
Project ___________________________
Quantity ___________________________
UF-R Series
MODEL GUIDE
Model No. Overall Width Grates Cooking Area
UF-24R
UF-30R
UF-36R
UF-48R
UF-60R
UF-72R
TOP-GRATE FEATURES:
• Reversible ULTRA-FLOW cast-iron grate sections
• Ribbed side for narrow marking, with side grease troughs
• Flat side for broiling fish and wide marking
• 1” (25 mm) ribbed grate spacing for consistent grilling results
• Three-position grid frame for adjustment from flat to 3” (76 mm)
raised-rear
• Sloped grates and side grate grease troughs to reduce flare-ups
STANDARD CONSTRUCTION FEATURES:
• Satin finish stainless steel front & top trim with 6” (152 mm) deep front
rail
• 5-9/16” (141 mm) high stainless steel side and rear splash
• Enclosed cabinet base with 6” (152 mm) adjustable stainless steel legs
• Other surfaces painted black with electrolytic zinc undercoating
• Full width front grease trough for easy transfer
• Removable large capacity grease container
• 1-1/4” NPT front gas manifold with ½ union on each end
STANDARD WARRANTY:
• One Year, Parts & Labor
AGENCY APPROVALS
• NSF Listed
• CSA Design Certified to ANSI Z83.11*CSA 1.8
24” (610 mm) 3 18” x 24” (457 x 610 mm)
30” (762 mm) 4 24” x 24” (610 x 610 mm)
36” (914 mm) 5 30” x 24” (762 x 610 mm)
48” (1219 mm)
60” (1524 mm) 8 48” x 24” (1219 x 610 mm)
72” (1829 mm) 10 60” x 24” (1524 x 610 mm)
7 42” x 24” (1066 x 610 mm)
BURNER/RADIANT SYSTEM FEATURES:
• 19,000 BTU/hr stainless steel tubular burners
• Individual manual gas valves for zoned heat control
• Standing pilot for automatic ignition
• Heavy-duty stainless steel radiants glow red for infrared broiling
• Removable self-cleaning radiants
• Full width debris screen under burners
• Full width removable drip tray
• Radiants and drip tray heat shields to reduce flare-ups
THE MONTAGUE COMPANY • 1830 Stearman Avenue, Hayward, CA 94545 • 800 345-1830 • Fax: 510 785-3342 • montaguecompany.com
HDB-3 [Rev. 10/10]
Item No. ___________________________
Heavy-Duty Gas Underfired Broilers
— Radiant Style Range Match Cabinet Base
UF-R Series
OPTIONS GUIDE:
General:
M
42” (1067 mm) unit depth (Suffix -40)
[Same grid size]
M
Casters — set of four/six 5” (127 mm) casters
M
Flex Connector Kit [1”] NPT:
M
3’ (914 mm) long M 4’ (1219 mm) long
M
13” (330 mm) High Back
[Matches 18” (457 mm) range back]:
M
stainless steel M black
M
Curb Mounting
M
Lower Warming Rack
M
Removable splash guard, stainless steel
Manifolds: [Left rear, with pressure regulator]:
M
1” NPT
Manifold Cap:
Stainless Manifold Cover:
M
left side M right side
M
left side M right side
Grates, Radiants, Plate Shelves
M
Seafood grates, cast iron
M
Round rod grates — 6” (152 mm) sections:
M
Hard chrome M Cold rolled steel
M
Scraper/cleaner for round rod grates
M
Cast iron radiants — in place of stainless steel
M
Wider Plate Shelf:
M
9” (229 mm) M 11” (279 mm)
M
Plate Shelf Cutouts [for 11” (279 mm) only]:
Project ___________________________
Quantity ___________________________
Dimensions in brackets are millimeters
M
Specify:
1/6 pans or M 1/4 pans or M 1/9
pans number: __ ea.
Finish/Cabinet Upgrades:
M
Stainless steel left side panel
M
Stainless steel right side panel
M
Stainless steel back panel
M
Stainless steel bottom cabinet shelf
M
Stainless steel cabinet base doors
INSTALLATION REQUIREMENTS & SHIPPING INFORMATION
1. Broilers must be installed in accordance with local codes or in their absence with the National Fuel Gas
Code: ANSI Z223.1; Natural Fuel Gas Code: CAN/CGA-B149.1 or Propane Installation Code: CAN/CGA-B149.2,
as applicable. Compliance with codes is the responsibility of the Owner and Installer.
2. An adequate ventilation system is required. Refer to National Fire Protection Association Standard No. 96,
“Standard for Ventilation and Fire Protection of Commercial Cooking Operations.”
3. This appliance is intended for commercial use by professionally trained personnel. NOT intended for
Residential Use.
4. Specify installation elevation: _____________ if above 2000 feet (610 m).
5. GAS INLET SIZE (All Models): 1-1/4” NPT front manifold with 1/2 union on each end provided for battery con-
nection. A properly sized gas pressure regulator must be furnished by the Installer. With 1” rear inlets, a gas
pressure regulator is provided and must be installed (by others) when unit is connected to gas supply.
6. The incoming gas line pressure into the regulator should be 8”-14” w.c. for natural gas, and 12”-14” w.c.
for propane gas.
Specify Type of Gas:
Manifold Pressure: 6.0” WC 10.0” WC
Models: Burners BTU/hr (kW) BTU/hr (kW)
UF-24R
UF-30R
UF-36R
UF-48R
UF-60R
UF-72R
4 80,000 (23.4) 80,000 (23.4) 372 lbs (169 kg) 85 21/.6
5 100,000 (29.3) 100,000 (29.3) 402 lbs (182 kg) 85 32/.9
6 120,000 (35.2) 120,000 (35.2) 432 lbs (196 kg) 85 32/.9
8 160,000 (46.9) 160,000 (46.9) 744 lbs (337 kg) 85 46/1.3
10 200,000 (58.6) 200,000 (58.6) 804 lbs (364 kg) 85 65/1.8
12 240,000 (70.3) 240,000 (70.3) 864 lbs (391 kg) 85 65/1.8
M Natural M Propane
Shipping
Weight
1830 Stearman Avenue, Hayward, CA 94545
800 345-1830 • Fax: 510 785-3342
www.montaguecompany.com
Minimum
Clearances
Noncombustible
Construction
From Back Wall 0”
Left & Right Side 0”
For use in noncombustible locations only.
Shipping
Class
Cube
(Crated)
3/m3
ft
Due to continuous product improvements,
specifications are subject to change without notice.
HDB-3 [Rev. 10/10]
Loading...