Montague GC-10 Specifications
Item No. ___________________________
Project ___________________________
Medium-Duty
57” (1148 mm) Counter-Top Range Models
Photo Not Available
SHORT/BID SPECIFICATION
Range shall be a Montague Grizzly Countertop Model:
M
GC-10, with five 11-5/16” x 25” (287 x 635 mm) cast iron open
top grates, over two 25,000 BTU/hr cast iron burners, each with
individual burner controls and automatic standing pilot
M
GC-8-1FT, with four 11-5/16” (287 mm) cast iron open top grates,
over two 25,000 BTU/hr cast iron burners each and one 11-5/16”
(287 mm) wide 1/2” (13 mm) thick frytop with one 20,000 BTU/hr
burner, with individual burner controls and automatic standing pilots
M
GC-6-2FT, with three 11-5/16” x 25” (287 x 635 mm) cast iron open
top grates, over two 25,000 BTU/hr cast iron burners each, and one
22-5/8” (575 mm) wide 1/2” (13 mm) thick frytop with two 20,000
BTU/hr burner, individual burner controls and automatic standing
pilots
M
GC-4-3FT, with two 11-5/16” x 25” (287 x 635 mm) cast iron open
top grates, over two 25,000 BTU/hr cast iron burners each, and one
34” (864 mm) wide 3/4” (19 mm) thick frytop with three 20,000
BTU/hr burner, individual burner controls and automatic standing
pilots
M
GC-2-4FT, with one 11-5/16” x 25” (287 x 635 mm) cast iron
open top grate, over two 25,000 BTU/hr cast iron burners each, and
one 45-5/16” (1151 mm) wide 3/4” (19 mm) thick frytop with four
20,000 BTU/hr burners, individual burner controls and automatic
standing pilots
M
GC-5FT, with one 56-5/8” (1438 mm) wide 3/4” (19 mm) thick
frytop with five 20,000 BTU/hr burners, individual burner controls
and automatic standing pilots;
… mounted on 8” (203 mm) high base with stainless steel front and
sides, 3” (76 mm) deep front rail, 4” (102 mm) high rear flue riser and 4”
(102 mm) stainless steel legs standard; plus all the features listed
and options/accessories checked:
Quantity ___________________________
MODEL GUIDE
Model No. Top Configuration
GC-10
GC-8-1FT
GC-6-2FT
GC-4-3FT
GC-2-4FT
GC-5FT
Ten 11-5/16” (287 mm) Open Burners
Eight 11-5/16” (287 mm) Open Burners &
11-5/16” Fry Top (287 mm)
Six 11-5/16” (287 mm) Open Burners &
22-5/8” Fry Top (575 mm)
Four 11-5/16” (287 mm) Open Burners &
34” Fry Top (864 mm)
Two 11-5/16” (287 mm) Open Burners &
45-5/16” Fry Top (1151 mm)
56-5/8” Fry top (1438 mm)
GRIZZLY TOP FEATURES:
Open Burner Sections are 11-5/16” wide x 25” deep (287 x 635 mm) with:
• One-piece cast iron, surface-ground top grates
• 25,000 BTU/hr cast iron mushroom-head burners with side ports and
spillover lip
• Automatic, standing pilots
• Drip pans positioned under burners
Frytop (Griddle) Sections are: 11-5/16” 9287 mm) [-1FT], 22-5/8”
(575 mm) [-2FT], 34” (864 mm)[-3FT], 45-5/16” (1151 mm) [-4FT] or
54-5/16” (1438 mm) [-5FT]: wide and 22” (559 mm) deep, with:
• 1/2” (13 mm) thick [-1FT & -2FT] or 3/4” (19 mm) thick [-3FT and
larger] precision-ground steel cook surface
• 2” (51 mm) high backsplash and tapered side-splashes
• 2-5/8” (67 mm) wide front grease gutter with drop to: built-in grease
drawer
• One 20,000 BTU/hr gas burner with standing pilots & gas control valve,
per 11-5/16” ft (287 mm) section
• Adjusting bolts for changing top plate forward pitch
STANDARD BASE CONSTRUCTION FEATURES:
• Satin finish stainless steel front and sides with 3” (76 mm) deep front rail
• Stainless steel 4” (102 mm) rear flue riser
• 4” (102 mm) height-adjustable stainless steel legs
• 3/4” gas pressure regulator is provided as standard
STANDARD WARRANTY:
• One Year, Parts & Labor
AGENCY APPROVALS
• NSF Listed
• CSA Design Certified to ANSI Z83.11*CSA 1.8
HDCS-4 [Rev. 10/10]
THE MONTAGUE COMPANY • 1830 Stearman Avenue, Hayward, CA 94545 • 800 345-1830 • Fax: 510 785-3342 • montaguecompany.com
Item No. ___________________________
Medium-Duty 57” (1148 mm)
Counter-Top Range Models
OPTIONS GUIDE:
For Frytop (Griddle) Sections:
M
Mount Frytop on left [Add to Suffix: -FTL] Adds
2” (51 mm) to width for grease container
M
3/4”(19 mm) thick plate for 1ft or 2 ft options
M
1” (25.4 mm) thick plate
M
Thermostat control(s) [Add to Suffix: -FTT]
M
4” (102 mm) removable side splash:
M
left M right
General:
M
Substitute Work Top for Open Burners —
Use Suffix: -__WS [Specify number: 1, 2, etc.]
M
Substitute Hot Top for Open Burners —
Use Suffix: -__HT [Specify number: 1, 2, etc.]
M
Stainless steel back panel
Project ___________________________
Quantity ___________________________
Dimensions in brackets are millimeters
INSTALLATION REQUIREMENTS & SHIPPING INFORMATION
1. Range must be installed in accordance with local codes or in their absence with the
National Fuel Gas Code: ANSI Z223.1. Compliance with codes is the responsibility of the
Owner and Installer.
2. An adequate ventilation system is required. Refer to National Fire Protection Association
Standard No. 96, “Vapor Removal from Cooking Equipment.”
3. This appliance is intended for commercial use by professionally trained personnel.
NOT intended for Residential Use.
4. Specify installation elevation: _____________ if above 2000 feet (610 m).
5. GAS INLET SIZE (All Models): 3/4” NPT at right rear. 3/4” NPT gas pressure regulator is
provided. The gas supply pressure to the regulator must be 8”-14” WC for natural gas or
12”-14” WC for propane gas. Consult factory for different gas types and pressures.
Specify Type of Gas:
Manifold Pressure: 6.0” WC 10.0” WC
Models: Burners BTU/hr (kW) BTU/hr (kW)
GC-10
GC-8-1FT
GC-6-2FT
GC-4-3FT
GC-2-4FT
GC-5FT
10 250,000 (73.2) 200,000 (73.2) 346 lbs (157 kg) 70 18/.5
9 220,000 (64.5) 180,000 (64.5) 363 lbs (165 kg) 70 18/.5
8 190,000 (55.7) 160,000 (55.7) 374 lbs (170 kg) 70 18/.5
7 160,000 (46.9) 140,000 (46.9) 443 lbs (201 kg) 70 18/.5
6 130,000 (38.1) 120,000 (38.1) 475 lbs (215 kg) 70 18/.5
5 100,000 (29.3) 100,000 (29.3) 507 lbs (230 kg) 70 18/.5
M Natural M Propane
Minimum
Clearances
Combustible
Construction
Noncombustible
Construction
From Back Wall 2” (51 mm) 0”
Left & Right Side 11” (279 mm) 0”
With or without
4” (102 mm) legs
Shipping
Weight
Suitable for installation
on non-combustible counters ONLY
Shipping
Class
Cube
(Crated)
3/m3
ft
1830 Stearman Avenue, Hayward, CA 94545
800 345-1830 • Fax: 510 785-3342
www.montaguecompany.com
Due to continuous product improvements,
specifications are subject to change without notice.
HDCS-4 [Rev. 10/10]
Loading...