Montague CR-1 Specifications
Item No. ___________________________
Heavy-Duty Gas
Custom Chinese Ranges:
Project ___________________________
Quantity ___________________________
Modular Base (CRM) or Cabinet Base (CR)
MODEL GUIDE
M
CR-1
M
CRM-1
[1 Burner]
14” (356 mm) 14” (356 mm) 14” (356 mm) 14” (356 mm) 14” (356 mm) 14” (356 mm)
16” (406 mm) 16” (406 mm) 16” (406 mm) 16” (406 mm) 16” (406 mm) 16” (406 mm)
18” (457 mm) 18” (457 mm) 18” (457 mm) 18” (457 mm) 18” (457 mm) 18” (457 mm)
20” (508 mm) 20” (508 mm) 20” (508 mm) 20” (508 mm) 20” (508 mm) 20” (508 mm)
22” (559 mm) 22” (559 mm) 22” (559 mm) 22” (559 mm) 22” (559 mm) 22” (559 mm)
24” (610 mm) 24” (610 mm) 24” (610 mm) 24” (610 mm) 24” (610 mm) 24” (610 mm)
26” (660 mm) 26” (660 mm) 26” (660 mm) 26” (660 mm) 26” (660 mm) 26” (660 mm)
28” (711 mm) 28” (711 mm) 28” (711 mm) 28” (711 mm) 28” (711 mm) 28” (711 mm)
M
CR-2
M
CRM-2
[2 Burners]
CUSTOM SIZING GUIDE
WOK SIZE: WELL SECTION: SOUP POT SIZE:
14” (356 mm) 12” (305 mm) 10” (254 mm) 20” (508mm)
16” (406 mm) 14” (356 mm) 12” (305 mm) 22” (559mm)
18” (457 mm) 16” (406 mm) 14” (356 mm) 24” (610mm)
20” (508 mm) 18” (457 mm) 16” (406 mm) 26” (660mm)
22” (559 mm) 20” (508 mm) 18” (457 mm) 28” (711mm)
24” (610 mm) 22” (559 mm) N/A 30” (762mm)
26” (660 mm) 24” (610 mm) N/A 32” (813mm)
28” (711 mm) 25” (635 mm) N/A 34” (864mm)
(Model No./Wok Size)
M
CR-3
M
CRM-3
[3 Burners]
M
M
[4 Burners]
CR-4
CRM-4
M
CR-5
M
CRM-5
[5 Burners]
RANGE LENGTH PER
WOK/SOUP POT:
M
CR-6
M
CRM-6
[6 Burners]
Model CRM-2 shown
SHORT/BID SPECIFICATION
Chinese Range shall be a Montague Legend Model [Specify]:
M
CRM (Modular Style)
M
CR (Enclosed Base)
[Specify Wok Size and Configuration in Left to Right Order]:
__” __” __” __” __” __”
…a heavy duty, custom-built, gas-fired unit with unique double cylinder
construction. Powerful cast iron 53,000 BTU/hr, 2- ring burners or
107,000 BTU/hr, 3- ring burners are standard. (Optional 80,000 BTU/
hr or 120,000 BTU/hr Jet Burners available) Heavy Duty 10 gauge
304 stainless steel top plate with cold water top cooling, full- length
rear drain, individual water fill faucets, a 9” (229 mm) wide stainless
steel plate shelf, stainless steel pipe over shelf, and 12-1/2” (318 mm)
height-adjustable legs standard; plus all the features listed and options/
accessories checked:
STANDARD CONSTRUCTION FEATURES:
• Stainless steel front, sides, and back
• 304 Stainless steel top plate and fixed cylinder
• 304 Stainless steel plate shelf, rear drain trough with removable strainer
• Rear drain located at left side (optional right side)
• Perforated copper water line for top cooling with master water control
valve
• Stainless steel drip tray below each burner
• Swing faucet, (1) per wok, cold water
• CR Models to have cabinet base with stainless steel front, sides, back,
bottom shelf, and 6” (152 mm) height adjustable legs
• 3/4” or 1” NPT rear gas connection(s) with pressure regulator(s) provided
[shipped loose]
STANDARD BURNER FEATURES:
• 53,000 BTU/hr. (15.5kW) 2-ring cast iron burners for 14”-18” wok sizes
• 107,000 BTU/hr (31.4kW) 3-ring cast iron burners for 20”-28” wok sizes
• Manual gas control valve & standing pilot: (2) valves and (1) pilot for
2-ring burner, (3) valves and (2) pilots for 3-ring burner
• Master knee level valve control to turn off ALL burners
STANDARD WARRANTY:
• One Year, Parts & Labor
AGENCY APPROVALS
• NSF Listed
• CSA Design Certified to ANSI Z83.11
CR-1 [Rev. 10/10]
THE MONTAGUE COMPANY • 1830 Stearman Avenue, Hayward, CA 94545 • 800 345-1830 • Fax: 510 785-3342 • montaguecompany.com
Item No. ___________________________
Heavy-Duty Gas Custom Chinese
Ranges: Modular Base (CRM) or Cabinet Base (CR)
OPTIONS GUIDE:
Jet Burners:
M
___ ea. 20 Jet,80,000 BTU/hr (23.4 kW) in lieu
of 2-ring 53,000BTU/hr (15.5kW) burner. Specify
wok position_____
M
___ ea. 32 Jet, 120,000 BTU/hr (35.2 kW
in lieu of 3-ring. 107,000 BTU/hr (31.4 kW)
burner. Specify wok position_____
Accessories:
M
Additional Woks: qty : ____ size ____
M
Wok Covers: qty: ____ size ____
M
Adapter Ring: qty: ____
Reduces well size for use with smaller wok.
Reduce to size:____
Casters with 5” wheel. Set of (4), (6), or (8)
depending on model.
Soup Pot Well:
Project ___________________________
Quantity ___________________________
Dimensions in brackets are millimeters
M
___ea. in lieu of wok. Specify position.
(Uses 2-ring 53,000 BTU/hr burner only)
Available for well sections up to 20”
INSTALLATION REQUIREMENTS & SHIPPING INFORMATION
1. Ranges must be installed in accordance with local codes or in their absence with the National Fuel Gas
Code: ANSI Z223.1. Compliance with codes is the responsibility of the Owner and Installer.
2. An adequate ventilation system is required. Refer to National Fire Protection Association Standard No. 96,
“Vapor Removal from Cooking Equipment.”
3. This appliance is intended for commercial use by professionally trained personnel. NOT intended for
Residential Use.
4. Specify installation elevation: _____________ if above 2000 feet (610 m).
5. GAS INLET SIZE (All Models): 3/4” NPT connection (up to 360,000 BTU/hr); 1” NPT connection (up to
560,000 BTU/hr) or two 1” connections (over 560,000 BTU/hr must be provided. A properly sized gas
pressure regulator(s) is/are shipped loose and must be installed (by others) when unit is connected to gas
supply.
5. The incoming gas line pressure into the regulator should be 8”-14” w.c. for natural gas, and 12”-14” w.c.
for propane gas
6. DRAIN CONNECTION REQUIRED: 2” NPT connection positioned left (Optional right side).
7. WATER CONNECTION REQUIRED: 1/2” NPT water connection positioned on right for perforated copper water
line. A 1/2” x 3/8” NPT hex bushing provided for each swing faucet.
Specify Type of Gas:
Manifold Pressure: 4.0” WC 10.0” WC
Model: Burner Selection:
CRM-____
CR- ____
TOTAL OUTPUT: _____________________________ BTU/HR (______________ kW) TOTAL BURNERS: __________________
M Natural M Propane
53,000 BTU/hr (15.5kW) 2-Ring
107,000 BTU/hr (31.4kW) 3-Ring
80,000 BTU/hr (23.4kW) Jet Burner
120,000 BTU/hr (35.2kW) Jet Burner
Entry Clearance: 31-1/4” (794 mm) uncrated [All Models]
QTY:
____
____
____
____
Minimum
Clearances
From Back Wall 0”
Left & Right Side 0”
For use in non-combustible locations only
Shipping
Weight
Approx. 150 lbs
(68 kg) per foot of
unit width.
Noncombustible
Construction ONLY
Shipping
Class
All Models
Class 85
1830 Stearman Avenue, Hayward, CA 94545
800 345-1830 • Fax: 510 785-3342
www.montaguecompany.com
Due to continuous product improvements,
specifications are subject to change without notice.
CR-1 [Rev. 10/10]
Loading...