Montague C36-11, C36-14 Specifications

Item No. ___________________________

Project ___________________________

Model C36-5 shown

Heavy-Duty Gas

Quantity ___________________________

36” Counter-Top Open Top/Hot Top Models

MODEL GUIDE

Top Sections/Configuration



Model No.

C36-5

C36-2E & -4E

C36-559/559S*

C36-3E & -10E

C36-5A

C36-11 & -14

C36-11E & -14E

Overall Width Open Tops Hot Tops

36” (914 mm) Three 12”

36” (914 mm) Two 12”

36” (914 mm)

36” (914 mm) One 12”

36” (914 mm) Two 18”

36” (914 mm) One 18”

Three 12”

in front

*Model C36-559S is step-up model

One 12”

EVEN HEAT

Three 12”

in back

Two 12” (305 mm)

EVEN HEAT

One 18” (457 mm)

French-Top

One 18” (457 mm)

EVEN HEAT

SHORT/BID SPECIFICATION

Counter-Top unit shall be a Montague Legend Heavy Duty Open-Burner

Model: C36__ [Specify suffix]:

-5 for three 12” x 31” (305 x 787 mm) heavy cast iron, precision

ground open top grates, each with two 30,000 BTU/hr lift off star burners; or

-2E or -4E for two 12” x 31” (305 x 787 mm) heavy cast iron, precision

ground open top grates, each with two 30,000 BTU/hr lift off star burners, plus one 18” wide x 31” (457 x 787 mm) deep Hot Top, with cast iron precision ground plate and 15,000 BTU/hr burner; or

-559 for three 12” x 15-1/2” (305 x 394 mm) heavy cast iron,

precision ground open top grates one 30,000 BTU/hr lift off star burner, plus three 12” wide x 15-1/2” (305 x 394 mm) deep Hot Tops positioned behind the open burners, with cast iron precision ground plate and individual EVEN HEAT 20,000 BTU/hr burners; or

-3E or -10E for one 12” x 31” (305 x 787 mm) heavy cast iron,

precision ground open top grates, with two 30,000 BTU/hr lift off star burners, plus two 12” wide x 31” (305 x 787 mm) deep Hot Tops positioned right, with cast iron precision ground plate and individual EVEN HEAT 20,000 BTU/hr burners; or

-5A for two 18” x 31” (457 x 787 mm) heavy cast iron, precision

ground open top grates, each with two 30,000 BTU/hr lift off star burners; or

-11 or -14 for one 18” x 31” (457 x 787 mm) heavy cast iron, precision

ground open top grates, with two 30,000 BTU/hr star burners, plus one 18” (457 mm) wide French-Top with individual 35,000 BTU/hr burner with ring and cover in front of cast iron plate; or

-11E or -14E for one 18” x 31” (457 x 787 mm) heavy cast iron,

precision ground open top grate, with two 30,000 BTU/hr lift off star burners, plus one 18” wide x 31” (457 x 787 mm) deep Hot Top positioned right, with cast iron precision ground plate and two individual EVEN HEAT 20,000 BTU/hr burners;

… mounted on a 36” (914 mm) wide heavy duty base with stainless steel

front, sides and bottom exterior 4” (102 mm) high flue riser, 3” (76 mm) deep front rail and 4” (102 mm) legs standard; plus all the features

listed and options/accessories checked:

OPEN BURNER FEATURES:

12” or 18” wide x 31” deep (305 or 457 x 787 mm) open burner top(s) with:

• Heavily ribbed cast iron, surface-ground top grate

• Two large diameter 30,000 BTU/hr lift off star burners with raised ports

• Individual burner controls

• Automatic, standing pilots

• Drip pan positioned under burners

EVEN HEAT HOT TOP FEATURES:

12” or 18” wide x 31” deep (305 or 457 x 787 mm) Even Heat hot top(s) with:

• Heavy cast iron precision ground plate

• Front fired, Even Heat 20,000 BTU/hr burner

• Heat transfer studs cast in plate bottom

• 2” (51 mm) side and front flanges isolate heat under plate

• Insulating partition between top sections

• Sloped, brick-lined flues for better heat transfer

FRENCH-TOP FEATURES:

18” wide x 31” deep (457 x 787 mm) French-Top with:

• Heavy cast iron precision ground plate with:

• Front-positioned removable ring & cover

• Front fired, banjo-type 35,000 BTU/hr burner

• Heat transfer studs cast in plate bottom

STANDARD BASE CONSTRUCTION:

• Satin finish stainless steel front and sides with 3” (76 mm) deep front rail

• Other surfaces painted black with electrolytic zinc undercoating

• Stainless steel 4” (102 mm)rear flue riser standard

• 4” (102 mm) adjustable stainless steel legs standard

• 1-1/4” front gas manifold with 1/2 union on each end

STANDARD WARRANTY:

• One Year, Parts & Labor

AGENCY APPROVALS

• NSF Listed

• ETL Design Certified to ANSI Z83.11

HDCS-14 [Rev. 10/10]

THE MONTAGUE COMPANY • 1830 Stearman Avenue, Hayward, CA 94545 • 800 345-1830 • Fax: 510 785-3342 • montaguecompany.com

Item No. ___________________________

Heavy-Duty Gas

36” Counter-Top Open Top/Hot Top Models

OPTIONS GUIDE:

General:

Stainless steel back panel

18” (457 mm) high riser

6” (152 mm) wide stainless steel plate shelf

Equipment Stand [Consult Factory]

Security Options/Prison Package [Consult Factory] Special finish options [Consult Factory]

Manifolds:

[Specify left or right rear with pressure regulator]:

1” NPT

Manifold Cap:

left side M right side

Stainless Manifold Cover:

left side M right side

Project ___________________________

Quantity ___________________________

Dimensions in brackets are millimeters

Open Burner Top Sections:

12” Cast Iron Ribbon Grate (requires thermostat) [In place of star grate section]

304 stainless steel burner box assembly

20,000 BTU/hr Star Burner

INSTALLATION REQUIREMENTS & SHIPPING INFORMATION

1. Counter-Top Unit must be installed in accordance with local codes or in their absence

with the National Fuel Gas Code: ANSI Z223.1; Natural Fuel Gas Code: CAN/CGA-B149.1 or Propane Installation Code: CAN/CGA-B149.2, as applicable. Compliance with codes is the responsibility of the Owner and Installer.

2. An adequate ventilation system is required. Refer to National Fire Protection Association

Standard No. 96, “Vapor Removal from Cooking Equipment.”

3. This appliance is intended for commercial use by professionally trained personnel.

NOT intended for Residential Use.

4. Specify installation elevation: _____________ if above 2000 feet (610 m).

5. GAS INLET SIZE (All Models): 1-1/4 (32mm) front manifold with 1/2 union on each end

provided for battery connection. A properly sized gas pressure regulator must be furnished by the Installer.

6. The incoming gas line pressure into the regulator should be 8”-14” w.c. for natural gas,

and 12”-14” w.c. for propane gas.

Specify Type of Gas:

Manifold Pressure: 6.0” WC 10.0” WC

Models: Burners BTU/hr (kW) BTU/hr (kW)

C36-5

C36-2E & -4E C36-559/559S C36-3E & -10E

C36-5A

C36-11 & -14

6 180,000 (52.7) 180,000 (52.7) 300 lbs (136 kg) 85 14/.4 5 140,000 (41) 140,000 (41) 315 lbs (143 kg) 85 14/.4 6 135,000 (39.6) 135,000 (39.6) 325 lbs (147 kg) 85 14/.4 4 100,000 (29.3) 100,000 (29.3) 380 lbs (172 kg) 85 14/.4 4 120,000 (35.2) 120,000 (35.2) 272 lbs (123 kg) 85 14/.4 3 95,000 (27.8) 95,000 (27.8) 306 lbs (139 kg) 85 14/.4

M Natural M Propane

Minimum

Clearances

Combustible Construction

Noncombustible

Construction

From Back Wall 2” (51 mm) 0”

Left & Right Side 6” (152 mm)* 0”

With or without 4” (102 mm) legs

*15” side clearance with open tops

Shipping

Weight

Suitable for installation

on non-combustible counters ONLY

Shipping

Class

Cube

(Crated)

3/m3

Due to continuous product improvements, specifications are subject to change without notice.

1830 Stearman Avenue, Hayward, CA 94545 800 345-1830 • Fax: 510 785-3342 www.montaguecompany.com

HDCS-14 [Rev. 10/10]