Montague 2EK15A Specifications
Double Deck,
Bakery Depth Electric Convection Ovens
Model 2EK15A
SHORT/BID SPECIFICATION
Convection oven shall be Montague Vectaire full-size, double deck electric
Model:
M
2EK15A (six 2.5-kW heating elements grouped in two sets) —
bakery depth 15-kW units with 6” (152 mm) stainless steel legs
… with a porcelainized steel oven interiors with one-speed [bakery] or two-
speed [standard] fan, nine rack positions, five bright nickel racks with
rack stops and no-tip guides standard; ball bearing mounted 50-50 split
doors with double pane viewing windows, plus all the features listed and
options/accessories checked:
Item No. ___________________________
Project ___________________________
Quantity ___________________________
2EK15A Series
MODEL-PAN/RACK GUIDE (For Each Deck):
Model No.
2EK15A
*18” x 26” (457 x 660 mm) sheet pans length or sideways
Oven
Depth
Bakery* 5/9 3-3/8” (86 mm) 1-1/2” (38 mm)
Racks/
Positions
EXTERIOR CONSTRUCTION FEATURES:
• Satin finish stainless steel front, sides and top
• Ball bearing mounted 50-50 double doors
• Tubular grab-bar handle with insulated comfort grip
• Double pane thermal viewing windows
• Durable, adjustable door gasket
• 6” (152 mm) height adjustable stainless steel legs
CONTROL FEATURES (EACH DECK):
• Power/fan control
• Automatic fan cutoff when door is opened (except in cool-down)
• Power indicator light
• Momentary-ON interior light switch
• Snap-action electric thermostat with 200-500°F (93-260°C) range
• Burner indicator light
• 60-minute electric countdown timer with alarm
• Moisture vent
STANDARD WARRANTY:
• One Year, Parts & Labor
• Lifetime Warranty on Doors
AGENCY APPROVALS
• NSF Listed
• UL Listed (ANSI/UL-197)
Rack Spacing
5-racks 9-racks
OVEN INTERIOR CONSTRUCTION [EACH DECK]:
• Porcelainized steel cooking compartment
• Nine-position bright nickel rack guides
• Five bright nickel pan racks, with rack-stop and no-tip guides standard
• Two covered interior lights
• 4” (102 mm) of insulation compressed to 2” (51 mm) with metal sheathing
HEATING ELEMENTS & BLOWER SYSTEM
[EACH DECK]:
• Six 2.5-kW heating elements grouped in two sets
• Blower with 3/4-horsepower two-speed motor
VCO-11 [Rev. 10/10]
THE MONTAGUE COMPANY • 1830 Stearman Avenue, Hayward, CA 94545 • 800 345-1830 • Fax: 510 785-3342 • montaguecompany.com
Item No. ___________________________
Double Deck, Full-Size,
Bakery Depth Electric Convection Ovens
2EK15A Series
OPTIONS GUIDE:
Installation Alternatives:
Casters [Set of four]:
M
3-1/2” (89 mm)
M
1” (25 mm) Toe base for curb mounting
M
Independent doors
Finish:
M
Full stainless steel oven interiors [-ASC suffix]
M
Stainless steel exterior bottom
M
Stainless steel louvered back panel
Project ___________________________
Quantity ___________________________
Dimensions in brackets are millimeters
Racks & Security:
M
Stainless steel drip trays: ____ ea.
M
Extra Racks: ____ ea. std.;
M
11-position rack guides [set of four]
M
Solid Doors [in place of windows]
M
Security Options [Consult Factory]
____ ea. heavy-duty
INSTALLATION REQUIREMENTS & SHIPPING INFORMATION
1. Oven must be installed in accordance with local codes or in their absence with the
National Electric Code: ANSI/NFPA 70. Compliance with codes is the responsibility of the
Owner and Installer.
2. Each oven deck requires a separate electric power connection. 1” (25.4 mm) knockout
provided.
3. An adequate ventilation system is required. Refer to National Fire Protection Association
Standard No. 96, “Vapor Removal from Cooking Equipment.”
4. This appliance is intended for commercial use by professionally trained personnel.
NOT intended for Residential Use.
Electric Requirements [For Each Deck]*
Total kW
Voltage Phase Hz
208 1 60 15.15 78 98
240 1 60 15.15 69 98
208 3 60 15.15 43 43 41 54
240 3 60 15.15 40 40 36 54
480 3 60 15.15 22 22 19 27
*Other Voltage/Hz models available. Contact factory.
Nominal AMP/Line
2EK15A
Minimum
Circuit Capacity
2EK15A2EK15A L1 L2 L3
Minimum
Clearances
From Back Wall 0” 0”
Left & Right Side 0” 0”
Unit must be mounted on legs or casters.
Shipping Information:
Models Weight
2EK15A
930 lbs (422 kg) 70 2 x 37/1
Entry clearance 30” (762 mm) uncrated
Due to continuous product improvements,
specifications are subject to change without notice.
Combustible
Construction
Noncombustible
Construction
Shipping
Class
Cube
(Crated)
ft³/m³
1830 Stearman Avenue, Hayward, CA 94545
800 345-1830 • Fax: 510 785-3342
www.montaguecompany.com
VCO-11 [Rev. 10/10]
Loading...