Page 1
280w Pointe BEAM –SPOT
moving head light
User Manual
This manual contains important information.
Please read before operating fixture.
Page 2
1 SECURITY TIP S
WARNING!!! To reduce the risk of fire, electric shock, or
injury to persons, follow these important safety instructions:
non-professionals, not to disassemble the light arbitrarily and
lighting accessories inside.
rated voltage range: AC110V-120V/60Hz or AC200V-240V / 50HZ
(to be selected).
not beam irradiate the flammable materials, flammable materials
and the lamp should be maintained at least 1M over the distance.
lamps used in ambient temperature: -15 ℃ -40 ℃, the
temperature of the surface of the lamp: 60 ℃.
to keep away from the liquid substance and humid environment.
before using the lights must ensure the good grounding, can not
install charging and remove any parts.
the installation of lamps, must be fixed screw fasteners with
additional security cable and regular inspection.
lamps consecutive working hours is not recommended more than
10 hours.
should stop using the lights in time when happens unusual
conditions during the process
lamp parts of the rotation, external accessories and paste parts
should be regular inspected, such as the emergence of loose and
rock, should be reinforced in a timely manner to prevent the
accident.
lamps adopt strong winds to refrigerate, it is easy to accumulate t he
dust, so you have to clean it weekly especially the cooling air
opening, otherwise the dust will plug leading to poor light
1
Page 3
2 TECHNOLOGY REFERENCE
Electrical:
Power supply:electronic auto-ranging
Input voltage range:supply 100-240V, 50/60Hz
Live Fuse: T 5 A/250V,
Neutral Fuse: T 5 A/250V
Max. power consumption: 470 W at 230V (I=2,05A,power factor 0.96)
Typical power consumption: 390W at 230V (I=1.8A, power factor 0.95)
*Allow for a deviation of +/-10%
Lamp:
Approved model: YODN HRI 280W RO
Base FaP2.5
Lamp life: 2000 hrs (Standard mode)
3000 hrs (Eco mode)
Ballast:Electronic
Optical System:
High luminous-efficiency glass reflector
Beam range: 5°-20° (spot application)
2.5°-10° (beam ap pl icat io n)
Colour wheel:13 dichroic filters + white
Static gobo wheel:10 metal gobos & 4 beam reducers
Rotating gobo wheel:
9 glass gobos can be indexed and rotated in both directions at different
speeds
2
Page 4
Gobo wheel continuous rotation
Glass gobos: outside diameter=15.9 mm, image diameter=12.5 mm,
thickness=1.1 mm,
high temperature borofloat or better glass
"Slot&lock" system for easy replacement of gobos
Prisms:
Rotating 6-facet linear prism with continuous rotation in both directions
Rotating 8-facet circular prism with continuous rotation in both
directions
Frost filter:Separate,variable frost filter
Zoom:Linear motorized zoom
Strobe:Strobe effect with variable speed (max.15 flashes/sec.)
Dimmer:Smooth dimmer from 0 - 100 %
Control:
Graphic touch screen for fixture setting and addressing
Gravitation sensor for auto screen positioning
Battery backup of the touch screen
Readout fixture and lamp usage, receiving DMX values, temperatures,
etc
Built-in analyzer for easy fault finding, error messages
Remotely switching on/off the lamp
Built-in demo sequences
Black-out while head moving, colour or gobo changing
Self-resetable thermo-fuse
Stand-alone operation
3 user editable programs, each up to 100 steps
Supported protocols: USITT DMX 512, RDM, ArtNet, MANet, MANet2,
3
Page 5
sACN
Support of RDM (Remote Device Management)
3 DMX modes (24,16, 30 control channels)
Wireless DMX/RDM module (only for wireless DMX version):
Compliance with USITT DMX-512 (1986 & 1990) and 512-A
Full DMX fidelity and frame integrity
Auto sensing of DMX frame rate and frame size
<5ms DMX latency
Operational frequency range of 2402-2480 MHz
Producer: LumenRadio
Pan/Tilt:
Pan movement range 540°
Tilt movement range 270°
1 6 bit movement resolution
Automatic Pan/Tilt position correction
Remotely controllable speed of pan/tilt movement for easy programming
Movement control: tracking and vector
Pan/tilt-lock mechanism
Connection:
DMX in/Out: 3-pin and 5-pin XLR
Ethernet: RJ 45
Power In: Chassis connector Neutrik PowerCon, A-type, NAC3MPA
Rigging:
Mounting points: 2 pairs of 1/4-turn locks
Mounting horizontally or vertically via 2 Omega brackets
Temperatures:
Maximum ambient temperature : 45° C
Maximum housing temperature : 90° C
4
Page 6
Minimum distances:
Min. distance from flammable surfaces: 1 m
Min. distance to lit objects (Standard mode-280W): 10 m
Min. distance to lit objects (Eco mode-230W): 7.5 m
Total heat dissipation:
1 600 BTU/h (calculated)
469 Wh (calculated)
Weight (net):
15 kg
3 Board Instruction
Control menu:
Control menu map:
ESCAPE
NEXT
PREV
ENTER
DISPLAY ON
5
Page 7
FEATURES SETTING
Run Mode
WIRE/AUTO/DMX
ChanMode SMAL/STANDEFE
X Reverse
ON/OFF
Y Reverse ON/OFF
XYspeed NORM/FAST/SLOW
X angle 360/540/630
XY Fback ON/OFF
SignalClear ON/OFF
Full Color ON/OFF
Shortcut ON/OFF
ADVANCEO FUNCTION:
Zero. Set Plane(0-255)
Tilt(0-255)
FixeGobo(0-255)
RotGobos(0-255)
Color(0-255)
Focus(0-255)
Zoom(0-255)
Shutter(0-255)
Prism(0-255)
Prism2(0-255)
GobosRot(0-255)
ADV.
RST.
SAVE
ESC
6
Page 8
Frost(0-255)
gobosRowRot(0-255)
Frost2(0-255)
Chan. Def. Color
Shutter
Dimmer
Gobo1
prismInt
PrismRot
Gobo2
Frost
Focus
Plane
PlaneFine
Tilt
TiltFine
Reset
XY speed
Fact. Set (0-255)X Master
(0-255)X Slave
(0-255)Y Master
(0-255)Y Slave
Lamp GND/5V
(0-255)Y A ngle
Logo Neutral/Custom
7
Page 9
KEY 4KEY/SHUTTLE
(0-255)UsePassWord1
(0-255)UsePassWord2
FactPassWord1
(0-255)FactPassWord2
Use. Mang. Limit
Defaults
MANUAL
LAMP REST ALL MOTER
PART MOTER
XY MOTER
TEST RUN AUTO
SOUND
SMULATE DMX CH1-CH32(0-255)
SYSTEM INFO
DMX VALUE
CH1-CH32(0-255)
OTHER INFO (0-9999)Run Ti me
(0-9999)Run Count
(0-9999)Residue T
(0-9999)Residue C
8
Page 10
(0-9999)Fan 1
(0-9999)Fan 2
(0-100)Temp 1
(0-100)Temp 2
PCB1 Ver
PCB2 Ver
PCB3 Ver
ERROR INFO Color
RotGobos
FixeGobos
Plane
Tilt
RotGobs1
Prism
Effect
Prism.R
Effect.R
Zoom
focus
DISPLAY SETTING
Brightness 1-7 Level
LightDelay Sec/On
Menuback Sec/Off
9
Page 11
Flicker
Off/On
LAMP SE TTING
Default ON/OFF
Manual ON/OFF
Electronic ON/OFF
UNLOCK
PassWord1
PassWord2
PassWord1
PassWord1
Zero. Set/ Chan. Def. 1 0
Fact. Set 1 2
Use. Mang. 3 4
4 DMX CHANNEL SHEET
CH Channel DMX
value
Description
1
Pan
0-255
Pan movement by 540°
2
Pan fine
0-255
Fine control of pan movement
3
Tilt
0-255
Tilt movement by 270°
4
Tilt fine
0-255
Fine control of tilt movement
10
Page 12
5
Pan/Tilt Speed
Pan/T ilt Time
0-255
Quick Slow
6
macro
0-19
No function
20-24
energy-saving mode(230w)
25-129
No function
130-139
Control table light bubble
140-149
Pan ,tilt reset
150-159
No function
160-169
Effect reset
170-199
No function
200-209
Lamp reset
210-229
No function
230-239
Control table out the bubble
240-255
No function
7
Color wheel
0-8
white
9-17
Dark red
18-26
Dark blue
27-35
Yellow
36-44
Green
45-53
magenta
54-62
Cyan
63-71
Red
72-80
Sea Green
81-89
Amber
90-98
Blue
99-107
Orange
108-116
Cooling
117-127
Blacklight Blue
128-129
White
130-134
Blacklight Blue+cooling
135-138
Cooling+orange
139-143
Orange+blue
11
Page 13
144-147
Blue+amber
148-152
Amber+sea green
153-157
Sea green+red
158-161
Red+skyblue
162-166
Skyblue+ magenta
167-171
Magenta+green
172-176
Green+yellow
177-180
Yellow+dark blue
181-185
Dark blue+dark red
186-189
Dard red+white
190-220
From Fast to slow running
221-250
From Slow to fast running
251-255
8
No function
9
No function
10
Static gobo
wheel
0-3
No function
4-9
Gobo1
10-15
Gobo2
16-21
Gobo3
22-27
Gobo4
28-33
Gobo5
34-39
Gobo6
40-45
Gobo7
46-51
Gobo8
52-57
Gobo9
58-63
Gobo10
64-69
Little beam1
70-75
Little beam2
76-87
Little beam3
Gobo shake from slow to fast
88-95
Gobo1
12
Page 14
96-103
Gobo2
104-111
Gobo3
112-119
Gobo4
120-127
Gobo5
128-135
Gobo6
136-143
Gobo7
144-151
Gobo8
152-159
Gobo9
160-167
Gobo10
168-175
Beam reducer 1
176-183
Beam reducer 2
184-199
Beam reducer 3
200-255
Static gobo running from
slow to fast
11
Rotating gobo
wheel
0-8
No function
9-17
Gobo1
18-26
Gobo2
27-35
Gobo3
36-44
Gobo4
45-53
Gobo5
54-62
Gobo6
63-71
Gobo7
72-80
Gobo8
81-89
Gobo9
Gobo shake from slow to fast
90-97
Gobo1
98-106
Gobo2
107-115
Gobo3
116-124
Gobo4
125-133
Gobo5
134-142
Gobo6
13
Page 15
143-151
Gobo7
152-160
Gobo8
161-169
Gobo9
171-179
Gobo9 stop
180-217
From fast to slow running
218-255
From slow to fast running
12
Gobo rotation
0-127
indexing
128-177
Forwards gobo rotation from
slow to fast
178-203
stop
204-255
Backwards gobo rotation
from fast to slow
13
No function
0-255
14
Prism
0-19
No function
20-75
6-facet linear prism
76-255
8-facet circular prism
15
Prism rotation
0-127
indexing
128-191
6-facet prism Backwards
rotation from fast to
slow,8-facet prism Forwards
rotation from fast to slow
192-193
No function
194-255
6-facet prism Forwards
rotation from slow to
fast,8-facet prism Backwards
rotation from slow to fast
16
Frost
0-64
No function
65-255
Linear frost
17
zoom
0-255
Zoom from max. to min.beam
angle
18
Zoom fine
0-255
Fine zooming
14
Page 16
19
focus
0-255
Continuous adjustment from
far to near
20
Focus fine
0-255
Fine focusing
21
No function
0-255
22
strobe
0-31
Strobe close( Lamp power
reduced to 230 W)
32-63
Strobe open, Full lamp power
64-95
Strobe from slow to fast
96-127
Strobe open
128-143
From fast to slow,slow close
fast open
144-159
From slow to fast,slow open
fast close
160-191
Strobe open
192-223
Random strobe-effect from
slow to fast
224-255
Strobe open, Full lamp power
23
Dimmer
0-255
Linear dimmer
24
No function
0-255
5 DIFFICULTY RESOLUTION
The following is a list of problems and resolution, and other
malfunction preparing work should be professionally qualified staff to
deal with.
1. Bulb not working
a) Check whether appro ach ing the service life of light bulbs, then
change it
b) Check whether bulbs circuitry leak, loss or connect poorly
15
Page 17
2. Beam appears bleak
a) The bulbs maybe approach the serv ice life, then change it, or
the optical components are unclean.
b) Bulbs have accumulation of dust, so the bulbs and other parts
a) off
6 AFTER SERVICE
1. Our company offer technical consultation to customers for ever.
2. If the machine is wrong and need repairmen, please truthfully fill in
the related content and feedback us the problems timely, as well as
we have to improve the product.
3. In addition to the lamp, also matching accessories are as follows：
accessories：Power line 1 piece Optional parts：(customers）
Warranty Card
c) Name Model inside the lamp should be
cleaned and maintained in regular period.
3. Computer lamp work intermittently
a) Check whether the fan process naturally and become dirty
b) Check inner temperature-response control plug is off
c) Check whether the circuitry is good
4. The computer lamp not controlled by controller during lighting
b) Check numeral starting address and the connection of
communication control circuit
c) The corresponding channel button of controller is open or not
16
Page 18
Check whether the fuse on power supply input jack is broken
Production Purchase
Description: These must be truthfully fill, seal by the end-user and point-of-sale, or else the
warranty will not work (warranty period and terms, see the following)
warranty period：one year since purchas e warranty terms：1、If fail when using the product
in n ormal state,
you can made under the provisions of the warranty, show the warranty card
and purchase bills(copy), and en joy free maintenan ce service in a s pecific service center or
the manufacturer.
2. The following will be the implementation of paid service:
(1)Without the effective warranty card
(2)There’s blank, alter and no point-of-sale name
(3)Fail caused by unresist ance
(4)Fail caused by tra ns por ta tion or unloadi ng
(5)Fail caused by not operate by manual
(6)Fail caused by disassemble without unauthorized
(7)Fail caused by using the unauthorized control system
Note:
Based on our company continue to improve the product, the statement
containing data may have ch anged, and will not notice th e change any
more. Company retains its right to change specifications related when
product is improved. Thanks for your understanding.
End User
Company Name:
Add:
Sale Store
Link man:
Tel: Stamp
17
Loading...