FEATURES ..................................................................................................................................................................................................................................... 4
CUSTOMER SERVICE ........................................................................................................................................................................................................... 4
APP INSTALLATION AND LOGIN ............................................................................................................................................................................. 6
ADD A DEVICE ......................................................................................................................................................................................................................... 7
AP Mode Installation .................................................................................................................................................................................................. 9
APP FEATURES ....................................................................................................................................................................................................................... 12
Adding a Remote ......................................................................................................................................................................................................... 13
Adding a DIY Device Type ................................................................................................................................................................................... 15
LINK DEVICES TO AMAZON ALEXA ................................................................................................................................................................... 18
LED INDICATOR STATUS .............................................................................................................................................................................................. 22
TECHNICAL SUPPORT ..................................................................................................................................................................................................... 23
Notice for FCC ................................................................................................................................................................................................................ 24
RF Exposure Statement for FCC .................................................................................................................................................................... 25
Notice for Industry Canada ................................................................................................................................................................................ 25
RF Exposure Statement for Industry Canada .................................................................................................................................... 25
2
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these
safety warnings and guidelines. Please keep this manual in a safe place for future reference.
This device is intended for indoor use only.
Do not expose this device to water or moisture of any kind. If moisture does get in
or on the device, immediately unplug it from the power source, then allow it to fully
dry before reapplying power.
Do not touch the device or any connected cables with wet hands.
Unplug the device from its power source if it will go unused for a long period of
time.
Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.
This device has no user serviceable parts. Do not attempt to open, service, or
modify this device.
INTRODUCTION
Powered by STITCH™, this Wireless Smart Universal IR Controller allows you to remotely
control your TV, cable box, or any other device that uses an IR remote control using your
Android™ or iOS® smartphone or tablet from anywhere, at any time. It communicates with
your phone through your local wireless network, so you won't need any separate mesh
network, hubs, or controllers. It supports remote controls that use a 38kHz IR signal and
includes thousands of preprogrammed devices to choose from. If your device is not in the
list, you can easily add it by teaching the controller the codes used by your remote for its
various functions. Eliminate the clutter of half a dozen or more remote controls and never
again tear your hair out trying to find a misplaced remote. Create groups and schedules to
integrate the various STITCH powered devices so that they operate in conjunction with
each other. The free STITCH app provides an all-in-one experience connecting all devices
for a smarter connected home. Amazon Alexa™ and Google Home voice control is
supported. No hub required!
3
FEATURES
Universal IR Controller to remotely control your TV, cable box, or any other device
that uses an IR remote control compatible with 38kHz IR frequencies using a free
app for your Android™ or iOS® smartphone or tablet
You can turn on your air conditioner to cool your room before you return home or
turn off your TV if you forgot to turn it off after leaving the house
360° omnidirectional coverage
Supports scene control and works with other "smart" devices
Works with other STITCH™ by Monoprice smart devices (sold separately)
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering,
purchasing, and delivery experience is second to none. If you have any problem with your
order, please give us an opportunity to make it right. You can contact a Monoprice
Customer Service representative through the Live Chat link on our website
www.monoprice.com or via email at support@monoprice.com. Check the website for
support times and links.
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service for a
replacement.
1x Smart IR controller
1x Micro USB cable
1x USB wall charger
1x User's manual
4
APPLICATIONS
The STITCH™ Smart IR Controller is great for controlling and monitoring your TV, fans, air
conditioner, and small appliances. Turn off unused electronics to save energy or turn on
your fan to cool your room before you return home.
PRODUCT OVERVIEW
1. Status Indicator/IR Receiver
2. Reset Button
3. Micro USB Port
PHYSICAL INSTALLATION
1. Place the controller near the electronics or appliances you wish to control. Ensure
that there are no obstacles to block the infrared signal.
2. Plug one end of the included Micro USB Cable into the Micro USB Port on the
controller, plug the other end into the included USB Wall Charger, then plug the
charger into a nearby AC power outlet. The Status Indicator should be flashing red
rapidly, indicating that it is ready to be paired with your Wi-Fi™ network. If it is not
flashing red rapidly, use a paper clip to press and hold the Reset Button for 5
seconds to reset the controller.
5
APP INSTALLATION AND LOGIN
1. Download and install the free STITCH™ by Monopriceapp from Google Play™ or the
App Store. Scan one of the two QR codes below to go directly to the appropriate
page in the app store.
2. Once the app is installed, launch it.
3. If you have already used the STITCH by Monoprice app, tap the Login button, then
enter your STITCH account information. If you have not installed and used the
STITCH app before, proceed to app registration. You can register using your phone
number or by using your email address. Follow the on-screen app instructions for
more details.
Note that the password must contain 6-20 characters and must include at least one
number.
6
ADD A DEVICE
Smart Inclusion Installation
Smart Inclusion is the default mode for installing your device. It uses your wireless network
to communicate between your smartphone and the smart device. If you do not have a
Wi-Fi® network or do not wish to include it in your network, see the
section.
1. Tap + on the Add Devices screen to add a new device.
AP Mode Installation
2. Scroll through the list and select Other Products (or IR Controller, if available) to add
your new device to the STITCH™ app.
7
3. The Status Indicator should be flashing red rapidly, indicating that it is ready to be
paired with your network. Tap Confirm on the app to continue, input the password
to your wireless network, then tap Confirm again.
4. The app will start connecting to the device. Tap Done once it is completed.
5. If the Status Indicator is not flashing red rapidly, use a paper clip to press and hold
the Reset Button for 5 seconds. The Status Indicator will flash red rapidly, indicating
that the device has been successfully reset and is ready to be paired with your
network.
8
AP Mode Installation
AP mode differs from Smart Inclusion mode in that it does not use your Wi-Fi® network to
manage the communications between your smartphone and the device. Instead, it
connects your phone's Wi-Fi directly to the device's built-in hotspot network.
1. Launch the STITCH™ by Monoprice app.
2. Tap + on the Add Devices screen to add a new device.
3. Scroll through the list and select Other Products (or IR Controller, if available) to add
your new device to the STITCH app.
9
4. Tap AP Mode at the top right.
5. The Status Indicator should be slowly blinking red, indicating that it is ready to be
added in AP mode. If it does begin blinking slowly, tap Confirm on the app to
continue, input the password to your wireless network, then tap Confirm again.
10
6. In the wireless settings on your phone, select the Stitch-XXXX entry, then tap
Connect Now to continue. The app will begin connecting to the device.
11
APP FEATURES
Set up your universal IR controller and select from over 3,940 preprogrammed
devices
Eliminate your multiple remote controls with an all-in-one remote using your
smartphone or tablet
Pair with other STITCH™ smart devices to create a scene and trigger other actions to
perform
12
APP OPERATIONS
Adding a Remote
1. Launch the STITCH™ app, then tap Add remote control.
2. Select a device type. You can choose Set Top Box, TV, Air conditioning, TV Box, Fan,
or DIY. The DIY option allows you to create your own remote type.
3. Select from the list of preprogrammed devices. If your device is not listed, go back
to the previous step and select the DIY option, then refer to the
Device Type
on www.monoprice.com.
4. After selecting your device, the controller will enter Learning Mode. The Status
Indicator will illuminate solid red.
5. Align the IR emitter on your remote with the IR receiver on the IR Controller.
6. Press a button on your remote control, then press the corresponding button in the
app.
section below. For a complete list of devices, refer to the product page
Adding a DIY
13
7. Once the buttons are matched, tap the Yes, Save button in the app.
14
Adding a DIY Device Type
1. Launch the STITCH™ app, then tap Add remote control.
2. Select the DIY option.
15
3. Align the IR emitter on the device's remote control with the IR receiver on the IR
Controller. Ensure that the remote control is within 3cm of the IR Controller.
4. Tap Next Step in the app to continue. The Status Indicator will illuminate solid red,
indicating that the IR Controller is in Learning Mode.
16
5. Press the button on the remote that you wish to teach to the IR Controller. The
Status Indicator will extinguish.
6. Enter the name of the button, tap Confirm, then tap Next step.
17
7. If you have another button you want to teach to the IR Controller, tap Continue,
then repeat steps 5 and 6.
8. Once you have finished teaching buttons to the IR Controller, tap Save to save the
changes.
Note: To add a new button or delete a button, tap Edit in the upper right corner of the
custom remote control panel.
LINK DEVICES TO AMAZON ALEXA
1. Before using Alexa™ to control your smart devices, make sure you meet the
following conditions:
Stable Wi-Fi® network that can access the Amazon server
An Amazon Echo™ device, including Echo, Echo Tap™, and Echo Dot™
An Amazon account
The STITCH™ by Monoprice app and account
18
At least one device added under STITCH™ by Monoprice account and the
device's name can be easily recognized by Echo™
2. Add one or more devices in the STITCH by Monoprice app by following the
instructions in the
3. In the Amazon Alexa™ app menu, tap Skills, then search for and select the STITCH
by Monoprice entry. Tap ENABLE to enable Amazon Skills.
ADD DEVICE
section above.
19
4. You will be redirected to the account link page. Select the proper country/region,
then input your STITCH™ by Monoprice account and password. Tap Link Now, then
tap Authorize. When the message STITCH by Monoprice has been successfully
linked appears, close the window.
20
5. Alexa™ needs to "discover" your smart devices before it can control them. Say
"Alexa, discover devices" or tap Discover to start the discovery process. Alexa will
then discover and sync with compatible devices added in the STITCH™ by
Monoprice app. The discovered devices will be displayed in a list.
Note: Each time the device's name is changed in the STITCH™ by Monoprice app, Alexa
must rediscover it again before it can be controlled.
6. You can now control your smart devices with Alexa™. You can use the following
command examples for a smart plug named bedroom light:
Alexa, turn on/off bedroom light
Alexa, set bedroom light to 50 percent
Alexa, brighten/dim bedroom light
7. You can also create groups in the Alexa™ app. Tap Groups to create a group and
give it a name, such as my smart lights. Select individual devices to add them to the
group, then tap Save. You can now control the entire group of devices with a single
command. For example, say "Alexa, turn on my smart lights" to turn on all lights in
the group.
21
LED INDICATOR STATUS
Smart Inclusion Mode
Status Indicator flashes rapidly
AP Mode
Status Indicator flashes slowly
Not Connected to a Network
Status Indicator is on
Connect to a Network
Status Indicator is off
Transmitting Data
Status Indicator flashes once
Enter Learning Mode
Status Indicator turns on
Received Learning Signal
Status Indicator turns off
In Network
Press and hold the Reset Button for 5 seconds, then release it to
reset to the default settings. This resets the device and enters
into Smart Inclusion mode.
Out of Network
While in Smart Inclusion mode, press and hold the Reset Button
for 5 seconds, then release it to switch to AP mode.
BUTTON INSTRUCTIONS
Notes:
In network: The device has been included into the network
Out of network: The device has the default settings and has never configured into a
Wi-Fi® network
The duration of the configuration network is about 2 minutes
22
TECHNICAL SUPPORT
Model
35753
Radio Frequency
2.4 GHz
Supported Network Protocols
IEEE802.11 b/g/n
Input Power
USB 5 VDC, 1A
Infrared Frequency
38kHz
Infrared Angle
360°
Infrared Range
Up to 16 feet (5 meters)
Operating Temperature
+32 ~ +113°F (0 ~ +45°C)
Dimensions
2.2" x 1.5" x 1.2" (57 x 39 x 30 mm)
Weight
1.9 oz. (52g)
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
or through email by sending a message to tech@monoprice.com. Check the website for
support times and links.
SPECIFICATIONS
23
REGULATORY COMPLIANCE
Notice for FCC
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Modifying the equipment without Monoprice's authorization may result in the equipment
no longer complying with FCC requirements for Class B digital devices. In that event, your
right to use the equipment may be limited by FCC regulations, and you may be required to
correct any interference to radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
24
RF Exposure Statement for FCC
Caution
This equipment complies with radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must be at least 20 cm from the user and must not
be collocated or operated in conjunction with any other antenna or transmitter.
Notice for Industry Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
RF Exposure Statement for Industry Canada
Caution
This equipment complies with radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must be at least 20 cm from the user and must not
be collocated or operated in conjunction with any other antenna or transmitter.
Android™ and Google Play™ are trademarks of Google LLC.
Cisco® and IOS® are registered trademarks or trademarks of Cisco Systems, Inc. and/or its
affiliates in the United States and certain other countries.
Wi-Fi® is a registered trademark of Wi-Fi Alliance.
Amazon™, Amazon Alexa™, Amazon Echo™, Echo Tap™, Echo Dot™, and all related logos
are trademarks of Amazon.com, Inc. or its affiliates.
STITCH™ and the STITCH logo are trademarks of Monoprice Inc.
25
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.