How it Works
Monoprice
Loading...
MP Mini SLA LCD
Getting Started Manual
2 pgs2.88 Mb0
User Manual
30 pgs732.65 Kb0
User Manual [de]
32 pgs741.17 Kb0

Monoprice MP mini SLA LCD User Manual

Download
MP Mini SLA LCD High Resolution Resin 3D Printer
P/N 35435, 38116
User's Manual
2
CONTENTS
Main Menu ............................................................................................................................................................................................... 9
Control Menu ......................................................................................................................................................................................... 9
Print Menu .............................................................................................................................................................................................. 10
Finish Screen ......................................................................................................................................................................................... 11
Main UI ...................................................................................................................................................................................................... 15
Web Slicer UI ........................................................................................................................................................................................ 17
Resin Storage ....................................................................................................................................................................................... 19
Resin Operation ................................................................................................................................................................................. 19
3
Safety and Resin ................................................................................................................................................................................ 19
Transferring Resin to Storage ................................................................................................................................................ 20
Discarding Resin ............................................................................................................................................................................... 20
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these
safety warnings and guidelines. Please keep this manual in a safe place for future reference.
• This device is intended for indoor use only.
• Do not expose this device to water or moisture of any kind. Do not place drinks or
other containers with moisture on or near the device. If moisture does get in or on
the device, immediately unplug it from the power outlet and allow it to fully dry
before reapplying power.
• Do not touch the device, the power cord, or any other connected cables with wet
hands.
• Do not install this device on an unstable surface where it could fall and cause either
personal injury or damage to the device and/or other equipment.
4
• Do not expose this device to excessively high temperatures. Do not place it in, on,
or near heat sources, such as a fireplace, stove, radiator, etc. Do not leave it in direct
sunlight.
• Do not place or install this device in an area where it can be exposed to excessive
amounts of dust, humidity, oil, smoke, or combustible vapors.
• Use only in a well-ventilated area. Do not use in close, confined spaces.
• Prior to operation, check the unit and power cord for physical damage. Do not use if
physical damage has occurred.
• Before plugging the unit into a power outlet, ensure that the outlet provides the
same type and level of power required by the device.
• Unplug this device from the power source when not in use.
• Take care to prevent damage to the power cord. Do not allow it to become
crimped, pinched, walked on, or become tangled with other cords. Ensure that the
power cord does not present a tripping hazard.
• Never unplug the unit by pulling on the power cord. Always grasp the connector
head or adapter body.
• This printer has many moving parts. Do not reach inside during printing.
• For best results, the ambient/room temperature should be +59 ~ +86°F (+15 ~
+30°C) and the relative humidity should be 20 ~ 50%.
• This printer should be placed away from light and should be operated in the dark.
• If any resin or liquid gets into the printer, clean it out immediately.
• Wear gloves, such as nitrile or neoprene when working with uncured resin. Do not
use latex gloves. If resin gets on your skin, immediately wash it off with soap and
warm water.
• Wear safety glasses/goggles when working with uncured resin. If resin gets in your
eye(s), immediately flush with cold, clean water, then consult a doctor.
• Clean the resin vat after printing.
• Keep out of reach of children.
5
INTRODUCTION
This printer uses an LCD screen to mask a cross section of your model, one layer at a time,
using a 405nm UV light array to cure resin held in a vat. The LCD screen is positioned
beneath a vat of resin, with a transparent film separating the resin and screen. Between
layers, the printer will lift (or "Raise") the print and return it one layer higher than
previously. This lifting action allows uncured resin to flow under the print and back into the
vat. This process is repeated layer by layer to shape the object.
Because of how it this style of printing works:
• Finer levels of detail are able to be printed than with FFF or filament printers. This
printer is equipped with a 2K screen to print at higher resolutions.
• The height of the object is the main determinant on how long it will take to print
the object. Additional models across the build platform will not increase time, as
long as the height does not increase.
• Supports should be included in any areas that would be "Islands", or areas that
would not be touching the already printed parts of the model. They should also be
used for heavy pieces that risk falling off of the build plate.
• Keeping the build platform, resin vat, and transparent film clean of debris and cured
resin is a must for successful printing.
• Cleaning the print and final curing are necessary post processing steps. Natural
sunlight produces all the UV light necessary to cure the final print. Exposure to
sunlight on a well-lit window sill for half an hour or longer will be sufficient for the
final curing process.
6
USEFUL TOOLS
There are a few tools that will make life easier when working with a resin printer. Some of
these are more important than others, but this list covers what a good workstation should
contain in ideal conditions.
Disposable Gloves: Always wear gloves when working with uncured resin. Nitrile gloves
are what we use in our lab. Neoprene gloves are also useable. Do not use latex
gloves. If resin gets on your skin, immediately wash it off with soap and warm
water.
Safety Glasses/Goggles: Always wear safety glasses/goggles when working with
uncured resin. If resin gets in your eye(s), immediately flush with cold, clean water,
then consult a doctor.
Metal Scraper: A putty knife or similar instrument can help remove prints from the build
plate when they stick a little too well.
Isopropyl Alcohol: Isopropyl alcohol is used for cleaning the finished print and any tools
that have come in contact with resin.
Spare Containers: Spare containers are always useful with liquid resin. They can be used
to store used resin, which you will recycle, to wash your finished print (be sure that
the container can be used with isopropyl alcohol), or to hold tools after they have
come in contact with the resin.
Plastic Scraper: A plastic scraper, such as an expired credit card, is used in the event
that a print fails and sticks to the FEP liner at the bottom of the resin vat. Refer to
the
CLEANING THE RESIN VAT
section for more information.
Paper Towels: Use paper towels to clean the workstation and prevent dripping on your
workstation.
Aluminum Foil, Plastic Wrap, or Plastic Liner: Use any of these products to protect your
workstation from resin drips.
Storage: You need a place to store everything to make the workflow easier.
7
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering,
purchasing, and delivery experience is second to none. If you have any problem with your
order, please give us an opportunity to make it right. You can contact a Monoprice
Customer Service representative through the Live Chat link on our website
www.monoprice.com or via email at support@monoprice.com. Check the website for
support times and links.
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service for a
replacement.
1x 3D printer
1x microSD™ memory card
1x Hex wrench
1x Bottle sample resin
1x AC power adapter 1x AC power cord
8
PRODUCT OVERVIEW
1. Acrylic Cover
2. Leveling Knob
3. Printing Platform
4. Resin Vat
5. LCD Display
6. Control Buttons
CONTROL BUTTONS
The control buttons on the front panel perform the following functions.
• Press the top button to move the highlight left or up.
• Press the top button while editing a value to decrease the value.
• Press the bottom button to move the highlight to the right or down.
• Press the bottom button while editing a value to increase the value.
• Press the center button to select the highlighted menu item or to save an edited
value.
9
MENU FUNCTIONS
Main Menu
1. Print: Select this option to print from a microSD™ card.
2. Profile: Select this option to manage the profile file being used.
3. Control: Select this option to display the Control Menu.
Control Menu
1. Z Axis: Select this option to control the movement of the Z axis.
2. Home: Select this option to move the printer to the Home position. The Home
position for this printer is when the printing platform is at its lowest point in the
resin vat.
3. Clear: Select this option to turn the UV lamp on for 10 seconds. This can be used to
clean the resin vat by curing an entire layer and peeling it from the FEP liner.
4. Back: Select this option to return to the Main Menu.
10
Print Menu
1. ETA: Displays the estimated remaining print time.
2. Print Phase: Displays either EXPOSURE or LIFT, indicating the action being currently
performed.
3. LAYERS: Displays the number of layers printed and the total number of layers for
the model.
4. BaseCureTime: Select this option to adjust the number of seconds to expose each
of first three layers. Use the top and bottom buttons to change the value. Press the
center button to save the changes.
5. CureTime: Select this option to adjust the number of seconds to expose each layer
other than the three layers. Use the top and bottom buttons to change the value.
Press the center button to save the changes.
6. RaiseDistance: Select this option to adjust the number of millimeters to raise the
platform between each layer. Use the top and bottom buttons to change the value.
Press the center button to save the changes.
7. Pause: Select this option to pause printing. Select it again to resume printing. Note
that the printer will finish exposing the current layer before pausing.
8. Height: Displays the printed height and total height of the model in millimeters.
9. Cancel: Select this option to cancel the current print.
11
Finish Screen
1. ONE MORE: Select this option to print the model again.
2. GO HOME: Select this option to return to the Main Menu.
PREPARING THE PRINTER
Before you run your first test print, there are a few steps that you should take to begin
printing.
1. Check the printer for issues:
• Verify that the Z axis can move freely and that there is no debris or packaging
material on the Z axis lead screw. Use the Z Axis option on the Control Menu to
raise the build plate to near the top of the printer.
• Verify that the FEP liner in the Resin Vat is clean and clear of any packaging
material or cured resin.
• Verify that the LCD Display and UV Lamp are functional by selecting the Clear
option on the Control Menu, while observing the bottom of the empty Resin
Vat.
• If any issues arise while checking the printer, please contact Technical Support
for assistance.
2. Add resin to the Resin Vat. a. Move the print bed up to near the top of the Z axis. b. Twist to remove the magnetic Printing Platform.
12
c. Shake the resin prior to filling the Resin Vat. Pigments can settle to the bottom
of the bottle, so make sure they are mixed properly prior to pouring.
d. Pour resin to fill the vat about half way. If recycling used resin, be sure to filter it
to prevent cured resin from entering the vat and causing complications with the
auto leveling system.
QUICK START GUIDE
To get started quickly, follow these steps to make a test print:
1. Remove the packaging materials from the box. Check the printer's Z axis for debris
from the packaging material.
2. Insert the microSD™ card into the card slot on the printer, then power the printer
on.
3. Select the Control option on the Main Menu to open the Control Menu.
4. Verify that the printing LCD Display turns on by selecting the Clear option on the
Control Menu. The display will turn on for about 10 seconds.
5. Ensure that the Resin Vat and build plate are clean and free of packaging material
and debris. Refer to the
CLEANING THE RESIN VAT
section for details.
6. Shake the resin bottle to ensure it is properly mixed.
7. Fill the Resin Vat about half way using the included sample resin.
8. Select the Back option on the Control Menu to return to the Main Menu.
9. Select the Print option on the Main Menu.
10. Select a model file from the list. You will be prompted to select a profile to use.
Select Okay to print using the default print profile. The printer will go to its Home
position, perform its leveling process, then start printing.
11. Once the print is finished, twist the build plate to remove it. We recommend
twisting to release the magnets, as they have a relatively strong force and pulling
directly may drive the Printing Platform and the print into the Resin Vat.
13
12. Scrape the print from the build plate into a small container. Fill the container with
Isopropyl Alcohol (91% or greater can be found at your local drugstore).
13. Cover the container, then shake vigorously for about 30-60 seconds. Refer to the
MODEL CLEANING
section for more detail.
14. Place the finished print in sunlight to perform the final cure.
WI-FI® SETUP
Perform the following steps to configure the printer to connect with your home's Wi-Fi®
network. Use of Wi-Fi is not required, you can print from the microSD™ card if you do not
wish to use a Wi-Fi connection. Note that the printer can only connect to a 2.4GHz Wi-Fi
network. The Web UI can only be accessed using a Wi-Fi connection.
1. Plug in and power on the printer. The first time it is powered on, the following
screen will be displayed.
2. Open your web browser on your computer, then navigate to http://bit.ly/linksla
3. Enter your Wi-Fi® SSID and password into the fields in your web browser, then click
the Generate button. The website will generate and download a file to the
Downloads directory on your PC that contains your Wi-Fi login information.
14
4. Locate the wifi.conf file in the Download directory, then copy it to the included
microSD™ card.
5. Ensure the printer is powered off.
6. Insert the microSD card into the card slot, then turn the printer on. The printer will
automatically read the generated file and will connect to your Wi-Fi network. After
it connects, the printer will automatically delete the file from the microSD card.
If you need to change the Wi-Fi login information, repeat steps 2-6 above.
ACCESSING THE WEB UI
Once you have established a Wi-Fi® connection, you can access and control the printer
using your web browser. Perform the following steps to access the Web UI.
1. If you have not already, perform the steps in the
WI-FI SETUP
section above.
2. Power the printer on. The Wi-Fi IP is displayed in the upper left corner of the Main
Menu.
3. Type the IP address into your browser's address window, then press the ENTER key.
4. The first time you access the Web UI, the printer will display an Access Code.
15
5. Enter the Access Code into the field on your web browser, then click the Submit
button.
WEB UI DETAILS
Main UI
1. Displays an image of the current layer being printed.
2. The printer management window allows you to Start, Pause, or Cancel prints. You
can also review the status of the current print.
3. Upload the print files by dragging and dropping sliced print files from your PC into
this window. The file will be copied to the microSD™ card using the Wi-Fi®
connection. Sliced files are generated using the Web Slicer, Creation Workshop, or
Print Studio.
4. This window displays a list of print files on the microSD card. Select a print file, click
Print, then select a profile to begin printing. If files have been added or removed,
click Refresh to refresh the print file list.
16
5. You can create and review profiles in this window by selecting the value, then
typing in the new parameters.
• Resin: Displays or changes the name of the profile file.
• Burn in second: Displays or changes the cure time for the base three layers.
Different manufacturers have different cure times for their resins. Monoprice
resin has a nominal cure time of 60 seconds for the three base layers.
• Exposure second: Displays or changes the cure time for the layers other than the
base three layers. Different manufacturers have different cure times for their
resins. Monoprice resin has a nominal cure time of 8 seconds for layers other
than the first three layers.
• Separation: Displays or changes the raise distance, which is the number of
millimeters that the printing platform lifts between layers to allow the uncured
resin to flow back into the Resin Vat. Different manufacturers have different
viscosities for their resin. For more viscous resins, a higher lift height may be
necessary.
6. Web slicer: Click the button to display the Web Slicer.
17
Web Slicer UI
1. Upload an STL 3D model file by dragging and dropping the file onto the Web Slicer
screen.
2. Adjust the Layer Height, Exposure Time, Lift Height, and Lift Speed parameters. a. Layer Height: The vertical size in millimeters of each printed layer. Smaller values
will result in a smoother surface on the finished print model, but will take longer
to print. On the other hand, larger values will result in a coarser surface, but will
take less time to print.
b. Exposure Time: The amount of time that the UV light will expose each layer
during printing. Different manufacturers have different cure times for their
resins. Monoprice resin has a cure time of 8 seconds for layers other than the
base three layers.
c. Lift Height: The number of millimeters that the Printing Platform is lifted out of
the Resin Vat between layers. Different manufacturers have different viscosities
for their resin. For more viscous resins, a higher lift height may be necessary.
d. Lift Speed: The speed at which the Printing Platform is lifted from the Resin Vat
between layers.
18
USING THE WEB SLICER
1. Turn the printer on. Type the IP address in the upper left corner of the Main Menu
into your web browser's address bar, then press the Enter key.
2. Click the Slicer entry in the upper left corner of the Main UI.
3. Load an STL model file using the file browser. Alternatively, you can drag and drop
an STL file directly onto the interface.
4. Use the controls in the Build Volume section to
change the size of the build area. This defaults to the
maximum print size for the printer and should rarely
need to be changed.
5. Use the controls in the Transformations section to
rotate, mirror, or scale the model.
6. Click the Slice button to begin slicing the model
7. After slicing is finished, click the Download button to
download the finished GIF file to your computer.
Alternatively, click the Print button to send the file
directly to the printer.
8. Copy the downloaded GIF file to the included microSD™ card. Alternatively, you can
upload the print file using the Web UI to save it to the microSD card inserted in the
printer using Wi-Fi®.
19
9. With the printer powered off, insert the microSD™ card into the card slot.
AUTO CALIBRATION
Whenever the printer is sent to the Home position or whenever a print is started, the
printer will automatically calibrate the Printing Platform. This requires the Resin Vat to be
free of cured resin particles or print failures can occur.
ABOUT RESINS
Resin Storage
Resins should be kept in a dark and ventilated place. The storage location should be kept in
the +68 ~ +86°F (+20 ~ +30°C) temperature range. Lower temperatures can extend the
shelf life. The official shelf life is one year.
Resin Operation
Wear gloves when working with resin to prevent direct skin exposure. If resin does get on
your skin, wash the exposed area immediately with soap and warm water.
Cured resin is safe to handle without gloves. Printed models should not be used for food
applications.
Safety and Resin
There are many types of resins and resin manufacturers. This section contains general
safety guidelines for handling resin.
• Wear gloves when working with uncured resin.
• Wear safety glass/goggles when working with resin.
• Do not eat or drink resin.
• Refer to the Material Safety Data Sheet (MSDS).
20
Transferring Resin to Storage
When you use resin, small portions can be unintentionally cured. For this reason, it is
recommended to not mix used resin and unused resin. The used resin can be filtered using
a fine mesh to remove any cured bits. For best results, store the resin in a black container
with a lid. The container should be stored in a dark, ventilated place to prevent curing
during storage.
Discarding Resin
Before discarding resin, it should be fully cured. The easiest way to cure the resin is to pour
it into a clear, disposable cup, then placing the cup in direct sunlight until the resin is fully
cured.
PRINTING TIPS
• Check the Resin Vat and Printing Platform before printing to ensure they are clean.
• After removing the model, cover the lid to prevent the remaining resin curing.
• After printing is finished, store the remaining resin in another container or leave it in
the Resin Vat. The shelf life will be significantly shorter for used resin. Adding fresh
resin can increase the shelf life.
21
CHITUBOX SLICING SOFTWARE
The following screen is displayed when the ChiTuBox program is executed.
• Click the button to load an STL or OBJ model file.
• Click the button to save the loaded model file in Creation Workshop
format.
• Click the button to slice the loaded model file.
22
The following is the Main screen with the Support Menu active.
• Click to add platform supports.
• Click to automatically add supports to the object.
• Click to add individual support(s).
• Click to delete individual support(s).
• Click to edit existing support(s).
You can control the size and shape of supports using the Setting window portion of the
screen. Not that the top of the support must not be less than 0.25mm and the base not less
than 0.6mm.
23
The imported model may differ in size and location from the print area. You can adjust the
model using the controls on the Property Bar on the right side of the screen.
Click to move the object and center it.
Click to rotate the object on the X, Y, and Z axes.
Click to scale the size of the object.
Click to mirror the object on the X, Y, or Z axis.
Click the button on the right side of the window to access the
Machine Settings pop-up. Following are the suggested settings.
24
Following are the suggested settings for the Print tab.
Perform the following steps to quickly create a slice file in ChiTuBox.
1. Open the ChiTuBox software program.
2. Click the button to load an OBJ or STL file.
3. Click the button on the Supports tab to quickly add supports.
4. Click the button to slice the file to the proper file type.
5. Click the button to save the file to the included
microSD™ card.
25
MODEL CLEANING
Perform the following steps to clean your finished print/model.
1. Once the print has completed, twist to remove the build platform, then use a metal
putty knife or spatula to remove the print from the platform.
2. Place the model in a container filled with isopropyl alcohol. Cover the container,
then shake it vigorously for about 30-60 seconds.
Note that the cleaning time should not be more than 5 minutes. If it is cleaned for too long, the details on the model will soften and the model surface will begin to whiten. The cleaning time should be shorter if the finished print has a lot of small/fine details.
3. Once cleaning is finished, place the model in a sunny location or under a UV light.
The curing time will depend on the type of resin used.
CLEANING THE RESIN VAT
It is not uncommon for cured resin to stick to the FEP lining in the bottom of the resin vat.
Perform the following steps while wearing gloves to clean this type of obstruction.
1. Use the included hex wrench to remove the protruding screw on the left side and
the protruding screw on the right side of the resin vat.
2. Pour the resin from the vat into a separate container. Do not pour it back into the
original resin bottle. A mesh strainer can help remove small pieces of free floating,
cured resin.
3. Using a plastic spatula, an expired bank/credit card, or other plastic tool that does
not have sharp edges, gently peel the resin from the FEP lining. The FEP lining is
extremely thin and can be torn or punctured if approached too aggressively or with
a sharp tool. Remove any remaining pieces of cured resin.
4. Use isopropyl alcohol and paper towels, clean the vat of any remaining resin. The
FEP liner should be as clean as possible.
5. Reinstall the vat into the printer.
26
TROUBLESHOOTING
1. If the print finishes and there is nothing on the build platform, there can be three
potential reasons:
• The first layers did not cure enough and the print has fallen off the Printing
Platform. Increase the base cure time. For Monoprice resins, the base cure time
should be 60 seconds. Other resins may require different amounts of time.
• The Printing Platform did not level correctly. Verify that there are no small
particles from previous prints in the resin vat, as this will disrupt the leveling
process. Keeping the resin vat clear of small pieces of cured resin in an absolute
necessity.
• Run the "Clear" function on the Control Menu to verify that the LCD screen is
turning on and off.
2. If the first layers are present, but the rest of the model is missing, there can be two
reasons:
• The cure time for the resin in not long enough. The model likely fell into the vat
and it will be necessary to remove it before attempting to print again. The
default exposure time for Monoprice resins is 8 seconds for layers other than the
first three layers.
• The model has insufficient supports. Add additional supports to compensate for
the weight of the model during printing.
27
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
or through email by sending a message to tech@monoprice.com. Check the website for
support times and links.
SPECIFICATIONS
Model
35435
Maximum Print Size
4.6" x 2.6" x 4.3" (118 x 65 x 110 mm)
Resolution
0.05mm
UV Wavelength
405nm
Interface
Wi-Fi®, microSD™ card
File Format
STL, OBJ
Software
Creation Workshop, Web Slicer, Print
Studio, ChiTuBox
Input Power
12 VDC, 5A
AC Adapter Input Power
100 ~ 240 VAC, 50/60 Hz
Dimensions
10.2" x 10.2" x 15.2" (260 x 260 x 385 mm)
Weight
6.6 lbs. (3.0 kg)
28
REGULATORY COMPLIANCE
Notice for FCC
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Modifying the equipment without Monoprice's authorization may result in the equipment
no longer complying with FCC requirements for Class B digital devices. In that event, your
right to use the equipment may be limited by FCC regulations, and you may be required to
correct any interference to radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
29
Notice for Industry Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
EU Declaration of Conformity
Monoprice, Inc. declares the product described within this user guide or manual is in
compliance with below applicable directives. The full text of the EU Declaration of
Conformity is available at the following internet address:
https://www.monoprice.com/product?p_id=35435 or the CE DoC can be found within this
user manual
• EMC Directive 2004/108/EC
• Low Voltage Directive 2014/35/EU
• RoHS2 Directive 2011/65/EU
• WEEE Directive 2012/19/EC
• REACH Directive 1907/2006/EC
WEEE Information
User information for consumer products covered by EU Directive 2012/19/EU on Waste
Electric and Electronic Equipment (WEEE)
This document contains important information for users with regards to the proper
disposal and recycling of Monoprice products. Consumers are required to comply with this
notice for all electronic products bearing the following symbol:
30
For Consumers in the European Union: This EU Directive requires that the product bearing
this symbol and or its packaging must not be disposed of with unsorted municipal waste.
The symbol indicates that this product should be disposed of separately from regular
household waste streams. It is your responsibility to dispose of this and other electrical and
electronics products via designated collection facilities appointed by the government or
local authorities. Correct disposal and recycling will help prevent potential negative
consequences to the environment and human health. For more detailed information about
the disposal of your unwanted product, please contacts your local authorities, waste
disposal service, or the shop where you purchased the product.
Safety Notice
WARNING: Do not use this product near water, for example, in a wet basement or near
swimming pool or in an area where accidental contact with water or liquid might occurs
WARNING: Avoid using this product during an electrical storm. There may be a remote risk
of electric shock from the surge caused by lightning
WARNING: The external power adapter or AC power cord is the equipment's disconnection
device. The power outlet must be located near the equipment and its access must be easy
WARNING: Use this product in a well-ventilated area
microSD™ is a trademark of SD-3C, LLC.
Wi-Fi® is a registered trademark of Wi-Fi Alliance.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use