Monoprice MP34369 User Manual

Magnetic-T

Introduction

Thanks for purchasing the Magnet-control power on/ off bluetooth earphones from Trendwoo, please read this manual before use.

Bluetooth wireless communications Technology introduction

Bluetooth is a kind of wireless technology which support short distance communications (work normally within a distance of 10M) with it you can exchange information by wireless between many IT digital devices like mobile phones / wireless earphones / computers ect. Bluetooth technology effectively and simplify to the communications which makes device and data transmission quickly and off effectively.

Overview Of Headset

volume+/next Multi-Function button USB charging portvolume -/previous

.BHOFUDPOUSPMQPXFSPOPGGCMVFUPPUI FBSQIPOFT6TFST.BOVBM

How To Use

Power On/Off

Shutdown state, pull open the right and left magnet, blue

LED light on, then power on;

Magnets touched, red LED light on, then power off; (NOTE: After power on, if the device is not connected in

5 minutes, it will power off automatically)

Pairing

Pairing steps as below:

1.Shutdown state, pull open the magnets until the red and blue LED light alternately flashing to the pairing state;

2. Open Bluetooth function on the phone;

3. Search Bluetooth Devices;

4. Choose "Magnetic-T" (If require password, please input "0000");

5.Blue LED light will flash slowly with prompt tone once bluetooth pairing successfully;

6.Once connected one time, magnets pull open to disconnect, magnets touched to re-connect automatically.

Pairing two mobile phones

1.According to the pairing steps to connect the first mobile phone and turn off the Bluetooth function on the phone to pair the second mobile phone.

2.Open Bluetooth function on first mobile phone,then manually connect to the first mobile phone.

Bluetooth earphone protocol and description

Protocol

HSP (Earphone)

HFP (Hands-free)

A2DP

(Senior frequency dispense)

AVRCP

(Audio/Video long-distance control)

Description

Earphone mode

for mono voice call

Phone call related controls

Support stereo music playing

Control music by long-distance

How To Use

Call

Answer / end a call: short press the MFB to connect or

hang up the current phone.

Reject a call:Long press the MFB for 2 seconds. Redial a call: Double click the MFB for 2 seconds.

Switching a Call: Short press the MFB to hang up the current phone and answer the waited call when you are calling. Double click on the MFB to answer second call, and switch between two calls. Short press the MFB, you can end the phone one by one.

Button Definition

Power off: Magnetic touch

Power on: Magnetic pull

Pairing Mode: Red and blue LED light alternately flashing

Answer incoming call: click the MFB

Reject incoming call: Long press the MFB for 2 seconds

Hang up the phone: Click the MFB

Call transfer: long press the phone button 2 second

Volump up: Click V+

Volume down: Click V-

Previous song: long press V+

Next song: long press V-

How To Use

Product Features

• Waterproof IPX4

• Sweat and Splash Proof

• CVC Intelligent Noise Reduction

• Music Play time about 10h

• Call time about 12h

• Mobile Phone Battery Display

• Support Multi-Point Connection

Bluetooth Earphone Specifications

Bluetooth Version Bluetooth V4.0 Bluetooth Protocol HFP、 HSP、 A2DP、 AVRCP CVC Output Power 5mw Workable Distance 10m(Barrier-free Space) Working Hours 12 hours for talking time, 10 hours for playing music Stand-by Time 240 hours Charging Time 2 hours Charging Voltage DC 5V Battery Capacity 130mAh

www.trendwoo.com

MADE IN CHINA

Any questions, please send an email to support@trendwoo.com for inquiry or website visit.

Safety And Maintenance

Please read suggests below in order to helping prolong the product lifespan and clearly understand the warranty clauses.

★ Keep the product dry, do not put it in humid circumstance

to avoid short circuit.

★ Do not expose it to the sun or high heat. High heating will

short lifespan of electronic components, damage battery and deform some plastic parts.

★ Do not put it in cold circumstance to avoid damage to

PCB board.

★ Do not attempt to take apart the product, especially

non-professionals.

★ Do not fall, vibrate strongly,strike with hard objects, to

avoid damage to inner electronic circuit.

★ Do not use high chemical products,detergent to clean the

item.

★ Do not scratch the surface with sharp items to avert

damaging the case and appearance.

★ Do not make it charging 10 hours continuously for the

sake of lifespan.

If the product does not work properly, please send it to Trendwoo. Our staff will help to solve the problems for you.

Statement: In order to improve the product performance, we will upgrade products, so the content may change without notice. Thank you for your understanding.

4 5 6