Monoprice INDIO 611710 Quick User Manual
INDIO
Electric Guitar Amp
P/N 611710
Quick User's Guide
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these safety warnings and
guidelines. Please keep this manual in a safe place for future reference.
This device is intended for indoor use only.
Do not expose this device to water or moisture of any kind. Do not place drinks or other containers with
moisture on or near the device. If moisture does get in or on the device, immediately unplug it from the
power outlet/remove the batteries and allow it to fully dry before reapplying power.
Do not expose this device to excessively high temperatures. Do not place it in, on, or near heat sources, such
as a fireplace, stove, radiator, etc. Do not leave it in direct sunlight.
Unplug this device from the power source when not in use.
Remove the batteries if it will go unused for a lengthy period of time.
Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or detergents. For stubborn
deposits, moisten the cloth with warm water.
This device has no user serviceable parts. Do not attempt to open, service, or modify this device.
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing
or damaged, please contact Monoprice Customer Service for a replacement.
1x Electric guitar amp
1x. AC power adapter
1x 3.5mm audio cable
1x Quick user guide
1
Model
611710
Speaker Type
5" cone
Power Output
10 watts
Power Source
6x AAA batteries or AC power adapter (included)
Dimensions
9.4" x 7.0" x 8.8" (238 x 179 x 224 mm)
PRODUCT OVERVIEW
a
1. 1/4" TS Guitar Input
2. Distortion/Clean Tone Button
3. Gain Knob
4. Bass Knob
5. Treble Knob
6. Volume Knob
7. Power LED Indicator
8. Power Switch
9. AC Adapter Input
10. AUX Volume Knob
11. 3.5mm TRS AUX Input
12. Battery Compartment
BATTERY INSTALLATION
1. Press the tabs on the edge of the battery compartment cover.
2. Remove the battery compartment cover.
3. Insert 6x AAA batteries (not included) into the compartment, taking care to match the polarities with the
markings inside the compartment.
4. Replace the battery compartment cover.
SPECIFICATIONS
2
Loading...