Monoprice Blackbird 36743 User Manual

Blackbird™ 4K HDMI® Scaler

P/N 36743

User's Manual

SAFETY WARNINGS AND GUIDELINES

Please read this entire manual before using this device, paying

extra attention to these safety warnings and guidelines. Please

keep this manual in a safe place for future reference.

 This device is intended for indoor use only.
 Do not expose this device to water or moisture of any

kind. Do not place drinks or other containers with

moisture on or near the device. If moisture does get in or

on the device, immediately unplug it from the power

source and allow it to fully dry before reapplying power.

 Do not touch the device, the power cord, or any other

connected cables with wet hands.

 Do not expose this device to excessively high

temperatures. Do not place it in, on, or near heat sources,

such as a fireplace, stove, radiator, etc. Do not leave it in

direct sunlight.

 Do not place or install this device in an area where it can

be exposed to excessive amounts of dust, humidity, oil,

smoke, or combustible vapors.

 Prior to operation, check the unit and power cord for

physical damage. Do not use if physical damage has

occurred.

2

 Before plugging the unit into a power outlet, ensure that

the outlet provides the same type and level of power

required by the device.

 Unplug this device from the power source when not in

use.

 Take care to prevent damage to the power cord. Do not

allow it to become crimped, pinched, walked on, or

become tangled with other cords. Ensure that the power

cord does not present a tripping hazard.

 Never unplug the unit by pulling on the power cord.

Always grasp the connector head or adapter body.

 Ensure that power is turned off and disconnected before

making any electrical connections.

 Clean using a soft, dry cloth only. Do not use chemical

cleaners, solvents, or detergents. For stubborn deposits,

moisten the cloth with warm water.

 This device has no user serviceable parts. Do not attempt

to open, service, or modify this device.

3

INTRODUCTION

This Blackbird™ 4K HDMI® Scaler with Frame Conversion is a high

performance HDMI video scaler. It can accept input resolutions

from 480i to 4K@60Hz (4:4:4) and can upscale or downscale the

video to any resolution from 1024x768@60Hz to 4K@60Hz (4:4:4).

It is compliant with the HDMI 2.0b and HDCP® 2.2 standards and

supports video bandwidth up to 18Gbps. It can extract the HDMI

audio to digital optical and stereo analog audio outputs. It has a

built-in OSD menu system and can be controlled using either the

front panel buttons or using a RS-232 control program on a

connected PC.

FEATURES

 Supports input resolutions from 480i to 4K@60Hz (4:4:4)
 Supports output resolutions from 1024x768@60Hz to

4K@60Hz (4:4:4)

 Complies with the HDMI® 2.0b and HDCP® standards
 Can extract HDMI audio to digital optical or stereo analog

audio outputs

 Supports adaptive de-interlacing

4

CUSTOMER SERVICE

The Monoprice Customer Service department is dedicated to

ensuring that your ordering, purchasing, and delivery experience

is second to none. If you have any problem with your order,

please give us an opportunity to make it right. You can contact a

Monoprice Customer Service representative through the Live

Chat link on our website www.monoprice.com or via email at

[e-mail]. Check the website for support times

and links.

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you

have all the items listed below. If anything is missing or damaged,

please contact Monoprice Customer Service for a replacement.

1x 4K HDMI® scaler

1x AC power adapter (12 VDC, 1A)

1x Euroblock connector

1x User's manual

5

PRODUCT OVERVIEW

Front Panel

1. RESO.: Momentarily press the RESO. button to switch the

output resolution. Press and hold the RESO. button for 5

seconds to set the output resolution to 720p@60Hz.

2. EDID: Momentarily press the EDID® button to change the

EDID value. Press and hold the EDID button for 5 seconds

to set the EDID to the factory default value.

3. ENTER: Momentarily press the ENTER button save the

settings. Press and hold the ENTER button for 5 seconds

to perform a software update.

4. HDMI IN: HDMI® port for connecting the video source

device.

5. USB: USB port for connecting a flash drive to perform a

software update.

6

Rear Panel

1. HDMI: HDMI® output port for connecting a video display.

2. OPTICAL: Digital optical audio output for connecting an

external amplifier or receiver.

3. AUDIO: 3.5mm stereo analog audio output for connecting

headphones or powered speakers.

4. RS-232: Euroblock terminal for connecting a computer for

RS-232 serial control.

5. DC 12V: DC barrel connector for connecting the included

AC power adapter.

6. LED: The LED illuminates when power is applied.

7

SAMPLE CONNECTION DIAGRAM

8

640x480@60Hz

720x480i@60Hz

720x480p@60Hz

720x576i@50Hz

720x576p@50Hz

800x600@60Hz

1024x768@60Hz

1152x864@75Hz

1024x768@75Hz

1280x768@60Hz

1280x960@60Hz

1280x1024@60Hz

1365x1024@60Hz

1600x1200@60Hz

1680x1050@60Hz

1856x1392@60Hz

1920x1080@60Hz

1920x1200@60Hz

1920x1440@60Hz

3840x2160@24Hz

3840x2160@30Hz

3840x2160@25Hz

4096x2160@24Hz

4096x2160@25Hz

4096x2160@30Hz

3840x2160@50Hz

3840x2160@60Hz

4096x2160@50Hz

4096x2160@60Hz

SUPPORTED INPUT RESOLUTIONS

9

1024x768@60Hz

1280x720@50Hz

1280x720@60Hz

1280x800@60Hz

1360x768@60Hz

1400x1050@60Hz

1600x1200@60Hz

1680x1050@60Hz

1920x1200@60Hz

1920x1080@50Hz

1920x1080@60Hz

3840x2160@30Hz

3840x2160@50Hz

3840x2160@60Hz

3840x2160@25Hz

SUPPORTED OUTPUT RESOLUTIONS

UPDATING THE SOFTWARE

In the event that a software update is made available, perform

the following steps to update your scaler's software.

1. Download the zip file with the software update, then

extract the MERGE.bin file to the root directory of a USB

flash drive.

2. Plug the USB flash drive into the USB port on the front

panel.

3. Press and hold the ENTER button for about 5 seconds,

until the OSD menu is displayed, then release the button.

The software update will commence. When it is

complete, the scaler will automatically reboot.

10

Model

36743

Video Input

1x HDMI®

Video Output

1x HDMI

Audio Outputs

1x S/PDIF digital optical,

1x 3.5mm stereo analog

HDMI Version

2.0b

HDCP® Version

2.2 (compatible with

HDCP 1.4)

TECHNICAL SUPPORT

Monoprice is pleased to provide free, live, online technical

support to assist you with any questions you may have about

installation, setup, troubleshooting, or product recommendations.

If you ever need assistance with your new product, please come

online to talk to one of our friendly and knowledgeable Tech

Support Associates. Technical support is available through the

online chat button on our website www.monoprice.com or

through email by sending a message to [e-mail].

Check the website for support times and links.

SPECIFICATIONS

11

Bandwidth

18Gbps

Input Resolutions

640x480@60Hz to

4096x2160@60Hz

Output Resolutions

1024x768@60Hz to

3840x2160@60Hz

Color Space

RGB, YCbCr 4:4:4,

YCbCr 4:2:2, YCbCr 4:2:0

Color Depth

10-bit, 12-bit

Input Power

12 VDC, 1A

AC Adapter Input Power

100 ~ 240 VAC, 50/60Hz

Power Consumption

Up to 8 watts

Operating Temperature

+32 ~ +104°F (0 ~ +40°C)

Storage Temperature

-4 ~ +140°F (-20 ~ +60°C)

Operating Humidity

20 ~ 90% RH, noncondensing

Dimensions

4.5" x 3.9" x 1.0"

(115 x 100 x 25 mm)

Weight

15.9 oz. (450g)

12

REGULATORY COMPLIANCE

Notice for FCC

This device complies with Part 15 of the FCC rules. Operation is

subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

Modifying the equipment without Monoprice's authorization may

result in the equipment no longer complying with FCC

requirements for Class A digital devices. In that event, your right

to use the equipment may be limited by FCC regulations, and you

may be required to correct any interference to radio or television

communications at your own expense.

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a commercial installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. Operation of this equipment in a residential area

13

is likely to cause harmful interference, in which case the user will

be required to correct the interference at his own expense.

Notice for Industry Canada

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme

NMB-003 du Canada.

Blackbird™ is a trademark of Monoprice Inc.

HDMI®, the HDMI Logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.

HDCP™ is a trademark of Digital Content Protection LLC.

Blu-ray Disc™, Blu-ray™, and the logos are trademarks of the Blu­ray Disc Association.

14