Monoprice 9742 User Manual

Wii2HDMI specification

1

Introduction

Wii2HDMI is an upscaling video converter for the Wii console. The converter accepts
all standard Wii video modes (NTSC 480i and 480p, PAL 576i) and produces a full
high-resolution HDMI signal at 720p or 1080p output. This plug and play solution
requires no special software or configuration. Just plug it in and start enjoying hi-res
Wii gaming!

Features

 Video and audio in full digital HDMI format, no transmission loss!

 Supports all Wii display modes (NTSC 480i 480p, PAL 576i).

 HDMI upscaling to 720p or 1080p high definition output.

 Provides advanced signal processing with exceptional color reproduction.

 High quality, state of the art motion adaptive de-interlacing for 480i and 576i

input.

 No power adaptor and no messy cords — just one HDMI cable from your Wii to
your HDTV.

 Hassle free, plug and play installation. Just plug it in and start using it right away!

Specifications

Dimensions: 1.3" x 2.9" x 0.6" (34 x 73 x 14 mm)
Weight: 0.5 oz (15g)
Power Consumption: less than 2 watts
Supported Video input Mode: Includes all the display modes of the Wii console

(480i, 480p, 576i)

Supported HDMI output Mode: 720p@60Hz, 1080p@60Hz
Input Connector: Wii AV Multi Out Plug

Output Connectors: 1x HDMI Connector, 1x 3.5mm Stereo Audio Jack

Wii2HDMI specification

2

Connecting to a TV/Monitor with HDMI Input

1. Ensure that both your Wii console and HDTV are powered OFF.

2. Insert the AV Multi Out Plug on the Wii2HDMI adapter into the AV Multi Out jack
on the back of the Wii console, as shown below.

3. Plug one end of an HDMI cable (not included) into the Wii2HDMI adapter and the
other end into the HDMI input on your TV. If you plan on using the 720p resolution,
you can use a Standard HDMI cable, but if you plan on using the 1080p resolution,
you will need a High Speed HDMI cable.

4. Turn on the TV and select the appropriate video input. Turn on the Wii and you
should get high resolution video on the screen.

Tip: For best display quality, we strongly recommend that you set the Wii video
output to 480p. This provides a higher quality starting signal, which will result in a
higher quality upscaled output to your TV. For more details, please refer to your Wii
owner's manual or the "Setting the Wii Video Output to 480p Mode" section below.