Monoprice 8277 User Manual

INSTALLATION GUIDE

Item No.:MP-DLB401

Thank you for choosing our product

Warning

This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children

1.Make sure these instructions are read and completely understood before attempting installation. If you are unsure of any part of this installation, contact a professional installer for assistance.

2.The wall or mounting surface must be capable of supporting the combined weight of the mount and the display; otherwise the structure must be reinforced

3.Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use safety gear can result in property damage, serious injury or death.

-4-

TV Size Range: 10 24

Max load capacity of each TV plate 22lbs

Integrated Cable management

CAUTION

Please read this guide before installation. Ensure the correct installation. Keep away from high frequency or power equipment to avoid disturbance.Choose desk to put this product. We can not be responsible for any damage caused by wrong installation.

Hardware Kit:Hardware Kit:

Part 2-Attach TV to adapter plate

Wrench

Top Cover

Adapter Plate

M6X10mm bolt

Knob

Tube

Plastic cover

Bottom support

Part 1

Part 1-Fitting the botton support on the desk

-Fitting the botton support on the desk

Hand handle

Attach TV to adapter plate using eight selected screws(A-D) and washers(E). Tighten screws firmly. Do not overtighten.

A B

C D

4 4 4 4 4

M4×8mm bolt M ×12mm4 bolt M ×8mm5 bolt M5×12mm bolt M5 washer

A-D

Part 3 Attaching Adapter Plate

Attach adapter plate to tube by sliding flanges of adapter plate into flanges of tube. then cover the top cover using bolt by wrench.

M6X10mm bolt

Choose the position of the base you want installed. Make sure there is enough space to spread display considering the show size. The desk should between 15mm to 55mm thick

and strong enough to bear the force

caused by your display.

-2-

-3-