Monoprice 8088 User Manual
Ma
User Manual
Wireless HD AV Transmitter & Receiver Kit
REV.1.0
Thank you for purchasing this Wireless HD AV Transmitter & Receiver Kit. Please read the following
instructions carefully for your safety and prevention of property damage.
Do not use the product in the extreme hot, cold, dusty or humid environments.
Prevent friction with hard objects, or it may lead to surface abrasion, components falloff or
hardware damage.
Avoid the product falling down from a high place, or it may damage the hardware.
The product is not water proofed so please do not get any liquid into the unit.
Do not wipe the surface of the product with alcohol, benzene or thinners.
Do not dismantle, assemble or alter the product arbitrarily.
When the product is operating, the surface temperature will increase slightly. This is normal.
Wireless HD AV Transmitter & Receiver Kit
1
1. Introduction
Wireless HD AV Transmitter & Receiver Kits run at 5GHz operation frequency to deliver
uncompressed HD video/audio 20 meters open field and 10 meters through wall with hidden
antenna. This device kits make wireless connection by using WHDI Technology from HD Media
Source Devices such as HD Disc Player, PC, Game Console, Settop Box to Display Device for
example LCD, Plasma or LED TV, Projector… while keep wire-equivalent quality and no latency.
2. Features
The Wireless HD AV Transmitter & Receiver Kit allows you to stream your HD contents
wirelessly from HD media
devices to your television.
It is ideal when your media player is located in your living room, while you want to watch your
Full HD movies on your
LCD, Plasma or LED television in your bedroom. You can just install the Wireless HD
Transmitter and Receiver Kit and let the air do the work. Furthermore, you can operate the
media player with the original remote control in your bedroom.
Up to four different HD media devices such as HD media player, Blue-ray player, Settop Box
and game Console can be connected to the transmitter unit via enclosed 4port HDMI switch.
You can select one video source to be sent wirelessly to the television which connected with
the receiver unit. And you can also choose another video source and display it on the TV
which connected with the output port on the switch unit with an HDMI cable (Note: Only one
HDMI cable is included in the package).
Support HDMI 1.3 video format and HDCP 1.2 with video encryption.
Support video resolution up to 1080p (30fps/60fps) including all 3D formats.
Wireless HD AV Transmitter & Receiver Kit
2
3. General Specifications
Video Format Support
Audio Format Support PCM, DTS, DOLBY DIGITAL
RF Communication System MIMO
Modulation OFDM
Maximum Transmission Power 12dBm
Image Transmission Distance 20 meters open field and 10 meters through wall
Image Delay < 1ms
Antenna High Performance Internal Antennas
Operating Frequency 5.1GHz to 5.9GHz
IR Carrier Modulation Frequency
Support
Power Supply AC In 100~240V, DC Out 5V Power Adapter
Operation Temperature 0 to 40 ℃℃
TV: 1080p, 1080i, 720p, 576p, 480p
PC: VGA(640x480), SVGA(800x600),
XGA(1024x768), SXGA(1280x1024)
38KHz
Wireless HD AV Transmitter & Receiver Kit
3
4.Package contents
Standard Package
Wireless HD AV Transmitter, Tx x 1
Wireless HD AV Receiver, Rx x 1
DC 5V Power Adapter for Tx and Rx x 2
HDMI Extension Cable, 1.2M x 1
Infrared Eye Extension Cable, 1.5M x 1
User Manual x 1
Full Package with HDMI Switch and IR Extender Box
Wireless HD AV Transmitter, Tx x 1
Wireless HD AV Receiver, Rx x 1
DC 5V Power Adapter for Tx and Rx x 2
HDMI Extension Cable, 1.2M x 1
Matrix 4 In 2 Out HDMI Switch x 1
Remote Control for the HDMI Switch x 1
IR Extender Box x 1
Infrared Eye Extension Cable, 1.5M x 4
DC 5V Power Adaptor for IR Extender Box x 1
User Manual x 1
Wireless HD AV Transmitter & Receiver Kit
4
Loading...