Monoprice 7093 User Manual
11701 6th Street, Rancho Cucamonga, CA 91730
S
Tel: (909) 989-6887 Fax: (909) 989-0078
Product ID : 7090 7091 7092
urface Mounted Box
1
2
Strip approximately 30mm of the cable jacket, and
separate the wires into 4 pairs.
Unshielded
30mm
2
2
Half shielded Full shielded
3
Surface box series provides two entrances for cables,
please pre-insert the cables before installation.
4
Complete wiring instruction for T568A & T568B.
T568A
Pin 1 White/Green
Pin 2 Green
Pin 3 White/Orange
Pin 4 Blue
Pin 5 White/Blue
Pin 6 Orange
Pin 7 White/Brown
Pin 8 Brown
T568B
Pin 1 White/orange
Pin 2 Orange
Pin 3 White/Green
Pin 4 Blue
Pin 5 White/Blue
Pin 6 Green
Pin 7 White/Brown
Pin 8 Brown
6
Fasten the cable holder and make sure the foil or
braid shield makes contact with the cable holder.
5
Follow the wiring instruction and IDC color-coding to
punch the wires by 110 or KRONE punching tool.
7
Place the upper cover to complete the installation.
Copyright © 2001-2012 Monoprice, Inc. All rights reserved.
All trademarks are the sole property of their respective companies. All prices and specifications are subject to change without notice.
Monoprice is not responsible for typographical errors. All typographical errors are subject to correction
.w1
Loading...