*The driver may already be updated to a newer version prior to packaging.
If your installation screen does not match the content of this manual,
please refer to your software screen after installation.
Connecting a tablet with USB interface into the PC after
finished the driver installation and restarted the Windows
To connect a pen tablet into the PC, you will see a small tablet
appears in the system tray, which is normally at the
Please install your drive then connect your dongle to
driver installation error or
I. General Information
1-1
I. General Information
1.
Overview
Welcome to the world of tablet and digital pen! You are able to discover how easy to control your
personal computer by using a wireless digital pen to instead of a mouse:
The function of the digital pen is able to draw a line very thin, thick, light or dark (the pressure sensitivity).
You also can write, sign, annotate documents, anddraw, sketch or paint as easily as you would on
normal paper and simulate the functions like pencil, mark pen, brush, or watercolor pen by using the
commercial software packages such as Adobe® PhotoShop™, Corel® Painter™ and Paint Shop™. If
MSN Messenger 8.5 or newer is installed, the user can freely create and send digital handwritings and
hand drawn pictures, making communication much more fun and entertaining.
If you cannot enable handwriting mode in MSN Messenger, please download the relevant handwriting
component from Microsoft's website.
2.
Pen Tablet Functions
After installing the device driver, your pen tablet features have got the following functions:
1. Direct pointing – You can move the cursor to any location on the screen by hovering the digital
pen tip over the tablet’s surface.
2. Three-buttons mouse commands - Your pen tablet provides all functions of a three- buttons’
mouse by using its pen tip and two buttons.
3. Pen scrolling – You can scroll documents and Web pages by pressing the middle button of the
digital pen over the tablet’s working area.
4. Pressure sensitivity – This feature allows you to emulate various brushes and pencils and you can
press down the pen tip harder, lighter, stronger or thicker, and subtle pencil lines you will receive.
3.
System Requirements
Windows 7/Vista/XP; USB port; DVD-ROM drive。
4.
Installing the Driver Software on Windows
Please follow the installation instructions below for Microsoft Windows 7, Vista and XP operating systems:
1. Place the DVD into the optical disc drive and wait for the main installation screen to appear.
2. The main installation screen should appear automatically, or you can manually start the installation by
opening
3. When installing the driver, please follow the installation instructions on screen and press the “Enter” key.
After the installation has completed, please reboot the computer.
5.
Hardware Installation
5.1
Wired Tablet (Media Wired Tablet) installation
【【【【
My Computer
】】】】
►
【【【【
DVD Rom
】】】】
► then click on the
:
【【【【
Setup
】】】】
program.
system:
icon
lower right corner of the screen.
★
5.2
Wireless
Tablet
(Media Wireless Tablet)
installation:
()
Please install the driver first before plug the tablet into
your PC.
1.After installing the driver, please restart your computer.
Then connectthe dongle to your USB port (as left picture)。
2.Put the battery into the back of Wireless Tablet。
3.Open Wireless Tablet Power。
4.Press Resume button around 4 seconds then your setting
will be finished。
5.After restart your computer, on bottom right of the screen,
you can find the tablet icon (
★★★★
the USB port. It will avoid
delay while the system is detecting new hardware.
) within there.
I. General Information
5
7
8
9
2
6.
Verifying Hardware and Driver Functions
6.1 Please follow the steps to verify if the wired tablet (Media Wired Tablet) is installed properly
‧‧‧‧
Tablet Features and Accessories
.
1-2
︰︰︰︰
★★★★ Note:
Product configurations may vary and some may not include all the accessories items.
1
3
4
The green LED light on the tablet is the main indicator for hardware operation and
depending on your pen tablet model may be located at a different place that shown in the
above diagram. This LED normally stays off, and will only turn it on or off in response to
various conditions. Watch the state of the LED on the tablet as you go through these test
steps:
1. Tap on any surface with the tip of the pen, or press the left button of the mouse, to
“wake it up” if it has gone into standby mode. A built-in power saving function may have
forced the pen or mouse into the standby mode if either of them is not used for a period
of time.
2. As soon as the pen tablet itself activates, the LED will be light briefly, and will then go
and stay off again.
3. When the tablet detects the presence of the digital pen or mouse, the LED will be
blinked slowly. This happens either when pen tip is hovering or placing within the
working area which above the tablet.
4. When you press a button on the pen barrel, or click on a mouse button, the LED will be
lighted up.
5. Hovering and moving the pen or the mouse in the working area will cause the cursor on
the screen to move accordingly.
★★★★ Note: After the tablet’s device driver has been properly installed, a small tablet icon ( )
will appear in the system tray, which is normally at the lower right corner of the
screen.
I. General Information
1
4
6
7
6.2 Please follow the steps to verify if the wireless tablet (Media Wireless Tablet) is installed
properly
‧‧‧‧
Tablet Features and Accessories
︰︰︰︰
.
1-3
★★★★ Note:
Product configurations may vary and some may not include all the accessories items.
3
2
5
1
2
1 — Power switch
2— USB Port(Only For Power)
3— Resume button
I. General Information
1-4
The green LED light on the Wireless tablet is the main indicator for hardware operation
and depending on your pen Wireless tablet model may be located at a different place that
shown in the above diagram. This LED normally stays off, and will only turn it on or off in
response to various conditions. Watch the state of the LED on the Wireless tablet as you
go through these test steps:
1. Tap on any surface with the tip of the pen, or press the left button of the mouse, to “wake it
up” if it has gone into standby mode. A built-in power saving function may have forced the pen
or mouse into the standby mode if either of them is not used for a period of time.
2. As soon as the pen Wireless tablet itself activates, the LED will be light briefly, and will then
go and stay off again.
3. When the Wireless tablet detects the presence of the digital pen or mouse, the LED will be
blinked slowly. This happens either when pen tip is hovering or placing within the working
area which above the Wireless tablet.
4. When you press a button on the pen barrel, or click on a mouse button, the LED will be
lighted up.
5. Hovering and moving the pen or the mouse in the working area will cause the cursor on the
screen to move accordingly.
★★★★ Note: After the Wireless tablet’s(Media Wireless Tablet) device driver has been
properly installed, a small tablet icon ( ) will appear in the system tray, which is
normally at the lower right corner of the screen.
7. Usage Tips
7.1 Wake up the digital mouse from the standby mode
If the digital mouse does not react after you do not use it for a while, press the left button to “wake” it up from
the standby mode.
★★★★
Wireless Tablet (Media Wireless Tablet) can’t support digital mouse
7.2 Tapping before you use the digital pen
Before you use the digital pen, or after not using it for several minutes, tap the pen on any surface of the
tablet to “wake” it up from the standby mode.
7.3 Double tapping
When you double tap with the digital pen (equivalent to a double click with a mouse), try to keep the pen tip
away from the tablet’s surface, or at least try to lift the pen tip as fast as possible before the second tap.
7.4 Storing the digital pen
To store the pen, make sure the pen tip does not touch anything, and especially do not let the pen stand in a
cup or penholder with the tip down. Even though the possibility is low, press the pen tip will still cause a
constant drain on the pen’s battery. Place the pen in a penholder, or turn the pen tip pointing upward or
horizontally with the pen tip free of any pressure by other objects.
7.5 Scrolling function of digital pen
The digital pen has the same function of the normal mouse for scrolling pages. Please press the first button
of the digital pen (same function as mouse’s middle click) over the tablet’s working area.
7.6 Using a pen without an ordinary mouse
You may install the digital pen, digital mouse, and normal mouse in your computer at the same time and you
can also remove them to different computer as well. However, only one device is able to work in the
meantime.
★★★★
Please do not use more than two devices at the same time in case the screen cursor is jittering or not
moving.
★★★★
Wireless Tablet (Media Wireless Tablet) can’t support digital mouse
The Wireless Tablet is the first of its kind to introduce wireless data transfer, providing a thoughtful design and a
maximum working range of 5 meters.The Wireless Tablet is a 2.4GHz wireless solution with multiple channels
and automatic channel skipping and assignment.The USB Dongles on both the tablet and PC can communicate
bidirectionally, meaning every bit of data that is sent or received is verified to ensure data transfer integrity.Even
when there are multiple users, it will be free from channel interference.
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.