Monoprice 612790 User Manual

SAFETY WARNINGS AND GUIDELINES

 Prior to operation, check the unit and power cord for physical damage. Do not

use if physical damage has occurred.

 Before plugging the unit into a power outlet, ensure that the outlet provides the

same type and level of power required by the device.

 This device uses a grounded power cord and requires a ground connection for

safe operation. Ensure that the power source has a proper ground connection.
Do not modify the plug or use a "cheater" plug to bypass the ground connection.

 This device has no user serviceable parts. Do not attempt to open, service, or

modify this device.

 Do not look directly into the light source.
 Keep the original packaging material for use when transporting the device.
 If the device will not be used for any lengthy period of time, it should be

unplugged from the wall.

 When installing this device, ensure that the mount is sufficiently robust to support

the weight of the unit and to prevent unwanted movement.

INTRODUCTION

Thank you for purchasing this stage light from Monoprice!
This light features six 10-watt RGBW LEDs enclosed within an IP65-rated water

resistant enclosure for use in outdoor environments. It includes several built-in
programs for dimming and strobe effects, including a Strobe Follow mode, which allows
multiple lights to strobe in sequence, rather than all at the same time. It also supports
standard DMX-512 control signals for use as part of a larger light production.

CUSTOMER SERVICE

The Monoprice Customer Service department is dedicated to ensuring that your
ordering, purchasing, and delivery experience is second to none. If you have any
problem with your order, please give us an opportunity to make it right. You can contact
a Monoprice Customer Service representative through the Live Chat link on our website
www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun:
9am-6pm PT) or via email at [e-mail]

2

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service
for a replacement.

1x Outdoor rated PAR stage light
1x User's manual

CONTROLS AND MENU DISPLAY

The LED menu display and the control buttons are located behind a translucent silicone
panel, which helps ensure the water resistant integrity of the light. To make changes to
the light's settings, temporarily remove the panel by unscrewing the four Philips head
screws. Once you have finished making changes, replace the panel to ensure the light's
water resistant integrity. Note that the IP65 rating does not apply when the panel has
been removed.

The 3-digit LED display indicates the mode and the selected value for that function or
mode.

 Press the A button on the

left to cycle through the
various modes and
functions.

 Press the B button on the

right to increase the value of
the selected function or
mode. Press and hold the
right button to rapidly
increase the displayed value.
The list will cycle back to the
beginning after the maximum
value is reached.

 Once the desired value is

displayed, press the A
button on the left again to set that value for the displayed function or mode and
allow for selection of another function or mode.

 Decimal point C (the one on the left) is illuminated whenever the light is in a

standalone mode.

 Decimal point D (the one on the right) is illuminated whenever the light is set to

DMX mode and a DMX signal is present.

 Both decimal points C and D will remain OFF whenever the light is in DMX mode

and no DMX signal is present.

3