Page 1
MONOPRICE
MP Bluetooth® Headphones with Qualcomm® aptX™ Support
P/N 27722
User's Manual
Page 2
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these
safety warnings and guidelines. Please keep this manual in a safe place for future reference.
Charge the battery before first use and at least once every three months to keep
the battery fresh and capable of holding a full charge.
Do not use this device while operating a motor vehicle, heavy equipment, walking
in traffic, or any other situation in which situational awareness is a key to safety.
Do not subject the product to extreme force, shock, or fluctuations in temperature
or humidity.
Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.
This device has no user serviceable parts. Do not attempt to open, service, or
modify this device.
These headphones contain a rechargeable Lithium-ion battery. They should only be
disposed of in accordance with local, State, and Federal guidelines for the disposal
of electronic waste.
INTRODUCTION
Thank you for purchasing these MP Bluetooth® Headphones! These headphones utilize a
Bluetooth version 4.1 radio, which allows you to stream audio from your Bluetooth-
equipped smartphone or tablet. They feature the Qualcomm® aptX™ audio codec, which
improves audio streaming quality when paired with an aptX-equipped device. They can be
simultaneously paired to up to two devices and include a 3.5mm stereo audio jack for
direct connections. The battery power status can be viewed on screen when paired with
an iOS® device.
2
Page 3
FEATURES
Compatible with the Bluetooth® 4.1 + EDR specification
Supports the Qualcomm® aptX™ audio codec
Includes 3.5mm stereo audio jack for direct connections
Can be paired to up to two devices
Battery power status viewable on iOS® devices
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering,
purchasing, and delivery experience is second to none. If you have any problem with your
order, please give us an opportunity to make it right. You can contact a Monoprice
Customer Service representative through the Live Chat link on our website
www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-
6pm PT) or via email at support@monoprice.com
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service for a
replacement.
1x MP Bluetooth® headphones
1x Micro USB charging cable
1x 3.5mm audio cable
3
Page 4
PRODUCT OVERVIEW
1. Multifunction Button
2. LED Indicator
3. Up Button
4. Down Button
5. Micro USB Port
6. Microphone
7. 3.5mm Audio Jack
OPERATION
Power On: With the headphones powered off, press and hold the Multifunction Button (1)
for 2 seconds. The headphones will power on and the LED Indicator (2) will flash
blue 2 times.
Power Off: With the headphones powered on, press and hold the Multifunction Button (1)
for 3 seconds. The LED Indicator (2) will flash red 2 times and the headphones will
power off.
4
Page 5
Increase Volume: Momentarily press the Up Button (3) to increase the volume one step. A
"tick" sound can be heard when the maximum volume level is reached.
Decrease Volume: Momentarily press the Down Button (4) to decrease the volume one
step. A "tick" sound can be heard when the minimum volume level is reached.
Play/Pause: Momentarily press the Multifunction Button (1) to start or pause playback.
Next Track: Press and hold the Up Button (3) for 2 seconds to skip ahead to the next track.
Previous Track: Press and hold the Down Button (4) for 2 seconds to skip back to the
previous track.
Answer Call: Momentarily press the Multifunction Button (1) to answer an incoming phone
call.
End Call: Momentarily press the Multifunction Button (1) to end a call in progress.
Reject Call: Press and hold the Up Button (3) for 2 seconds to reject an incoming phone call.
Swap Devices: With a phone call in progress on the headphones, press and hold the Up
Button (3) for 2 seconds to switch the call from the headphones to your phone.
Press and hold the Up Button (3) for 2 seconds to switch the call back to the
headphones.
Last Number Redial: With no call in progress, momentarily press the Multifunction Button
(1) twice to redial the last number.
Call Mute: With a call in progress, press and hold the Down Button (4) for 2 seconds to
toggle the call mute function on or off.
Reset: Connect the headphones to a computer using the included micro USB cable to reset
the headphones back to the factory default settings. The LED Indicator (2) will flash
red twice to indicate that the reset is complete.
5
Page 6
LED STATUS
Operation
LED Status
Power On
LED flashes blue 2 times
Power Off
LED flashes red 2 times
Pairing
LED flashes red and blue alternately
Standby
LED flashes blue 3 times in 5 seconds
Incoming Call
LED flashes blue continuously
Low Battery
LED flashes red 2 times every 2 seconds
Charging
LED illuminates red while charging and changes to blue when charging
is complete.
PAIRING
Perform the following steps to pair the headphones with a smartphone or tablet. Note that
the headphones can be simultaneously paired with 2 devices.
1. Ensure that the headphones are powered off.
2. Press and hold the Multifunction Button (1) for 5 seconds. The LED Indicator (2) will
flash red and blue alternately, indicating that the headphones are in pairing mode.
3. Search for available Bluetooth® devices on your device and select the MP27722
entry. If prompted for a passcode, enter 0000 (four zeroes). The LED Indicator (2)
will cease flashing.
PHYSICAL CONNECTION
If you do not wish to use the Bluetooth® streaming or if you want to listen to a device that
is not Bluetooth-enabled, plug one end of the included 3.5mm audio cable into the 3.5mm
Audio Jack (7) on the headphones, then plug the other end into the headphone output on
your audio source device.
6
Page 7
CHARGING
To charge the headphone, plug one end of the included micro USB cable into the Micro
USB Port (5) on the headphones, then plug the other end into a USB charger. Do not plug it
into a computer, unless you want to reset your pairings. The LED Indicator (2) will
illuminate red while charging is in progress and will change to blue when charging is
complete.
Note: The headphones must be charged before first use and at least once every 3 months
to keep the battery fresh and capable of holding a full charge.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
during regular business hours, 7 days a week. You can also get assistance through email by
sending a message to tech@monoprice.com
7
Page 8
SPECIFICATIONS
Model
27722
Frequency Response
20Hz ~ 20kHz
Sound Pressure Level
118dB ±3dB
Impedance
32 ohms
Bluetooth® Version
4.1
Support Bluetooth Profiles
A2DP, AVRCP, HSP, HFP
Wireless Range
up to 32 feet (10 meters)
Talk/Playback Time
up to 14 hours on a full charge
Standby Time
up to 540 hours on a full charge
Dimensions
7.9" x 7.1" x 2.6" (200 x 180 x 65 mm)
Weight
9.0 oz. (256 g)
The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc.
Qualcomm® is a trademark of Qualcomm Incorporated, registered in the United States and
other countries. aptX™ is a trademark of Qualcomm Technologies International, Ltd.,
registered in the United States and other countries. Qualcomm® aptX™ is a product of
Qualcomm Technologies International, Ltd.
IOS® is a trademark or registered trademark of Cisco in the U.S. and other countries and is
used under license.
8
Loading...