How it Works
Monoprice
Loading...
24659
User Manual
18 pgs731.07 Kb0

Monoprice 24659 User Manual

MONOPRICE
27" WQHD Monitor
P/N 24659
User's Manual
CONTENTS
Front ........................................................................................................................................................................................................... 5
Rear .............................................................................................................................................................................................................. 5
Rear Panel .............................................................................................................................................................................................. 6
Controls ................................................................................................................................................................................................... 6
Remote Control ................................................................................................................................................................................. 7
Set Menu ................................................................................................................................................................................................ 11
Position Menu ................................................................................................................................................................................... 12
Color Menu .......................................................................................................................................................................................... 13
OSD Set Menu ................................................................................................................................................................................. 14
Reset Menu ......................................................................................................................................................................................... 15
Set 2 Menu .......................................................................................................................................................................................... 16
Notice for FCC ................................................................................................................................................................................. 18
Notice for Industry Canada .................................................................................................................................................. 18
2
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these
safety warnings and guidelines. Please keep this manual in a safe place for future
reference.
This monitor is intended for indoor use only. Do not expose this monitor to water or moisture of any kind. Do not place drinks
or other containers with moisture on or near the monitor. If moisture does get in
or on the monitor, immediately unplug it from the power outlet and allow it to
fully dry before reapplying power.
Do not touch the monitor, the power cord, or any other connected cables with
wet hands.
Do not subject the monitor to extreme force, shock, or fluctuations in
temperature or humidity.
Do not expose this monitor to excessively high temperatures. Do not place it in,
on, or near heat sources, such as a fireplace, stove, radiator, etc. Do not leave it
in direct sunlight.
Prior to operation, check the unit and power cord for physical damage. Do not
use if physical damage has occurred.
Take care to prevent damage to the power cord. Do not allow it to become
crimped, pinched, walked on, or become tangled with other cords. Ensure that
the power cord does not present a tripping hazard.
Ensure that power is turned off and disconnected before making any electrical
connections.
Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.
This monitor has no user serviceable parts. Do not open the case or otherwise
attempt to modify this monitor.
Do not leave a single image on the display for a long period of time. Doing so
could cause "burn-in" of the image.
3
FEATURES
2560x1440@60Hz maximum resolution 16:9 aspect ratio HDMI®, Dual-Link DVI-D, VGA, and DisplayPort video inputs 5ms response time +15°/-5° tilt using the included stand
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your
ordering, purchasing, and delivery experience is second to none. If you have any
problem with your order, please give us an opportunity to make it right. You can
contact a Monoprice Customer Service representative through the Live Chat link on our
website www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-
Sun: 9am-6pm PT) or via email at support@monoprice.com
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service
for a replacement.
1x 27" Monitor
1x Stand Neck
2x Stand Base Legs
6x Stand Base Screws
1x DisplayPort Cable
1x AC Power Adapter
1x AC Power Cord
1x IR Remote Control
2x AAA Batteries
1x User's Manual
4
PRODUCT OVERVIEW
Front
Rear
Rear Panel
DisplayPort: DisplayPort 1.2 input with a 2560x1440@60Hz maximum resolution.
RGB (VGA): VGA input with a 1920x1080@60Hz maximum resolution.
DVI: Dual-Link DVI-D input with a 2560x1440@60Hz maximum resolution.
HDMI: HDMI® input with a 2560x1440@60Hz maximum resolution.
Audio Out: 3.5mm TRS stereo analog audio output.
DC IN: DC barrel connector for connecting the included AC power adapter.
Controls
1. MENU: If the OSD menu is not displayed, press the
MENU button to activate the OSD menu. If the OSD
menu is already displayed, press the MENU button to
go back one level or to exit the OSD menu. If editing a
value, press the MENU button to exit editing without
saving any changes that have been made.
2. SELECT: If the OSD menu is displayed press the SELECT
button to cycle through the active inputs. If the OSD
menu is displayed, press the SELECT button to select
the highlighted menu entry. If editing a value, press
the SELECT button to save any changes that have
been made.
3. V.+: If the OSD menu is not displayed, press the V.+ button to increase the
volume level. If the OSD menu is displayed and an entry has been selected for
editing, press the V.+ button to increase the displayed value.
4. V.-: If the OSD menu is not displayed, press the V.- button to decrease the
volume level. If the OSD menu is displayed and an entry has been selected for
editing, press the V.- button to decrease the displayed value.
6
Loading...
+ 12 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use