Monoprice 13259 User Manual
–
1
SAFETY WARNINGS AND GUIDELINES
This speaker system is intended for indoor use only.
Do not expose these speakers to water or moisture of any kind. Do not place
drinks or other containers with moisture on or near them. If moisture does get in
or on the speakers, immediately unplug them from the power source and allow
them to fully dry before reapplying power.
If operating these speakers in a humid environment, ensure that no condensation
occurs. Condensation could cause damage to the speaker cone and could cause
a short in the amplifier, which in turn could cause fire or severe electric shock.
Do not expose this device to excessively high temperatures. Do not place it in,
on, or near heat sources, such as a fireplace, stove, radiator, etc. Do not leave it
in direct sunlight.
Use only in a well-ventilated area. Do not use in close, confined spaces. Ensure
that there is at least 12 inches of space around the main speaker to allow for
adequate ventilation.
Unplug the speakers from the power source if they will go unused for a long
period of time.
Prior to operation, check the unit and power cord for physical damage. Do not
use if physical damage has occurred.
The power supply for these speakers accepts a wide range of input voltages,
from 100 to 240 VAC, 50 or 60 Hz. Ensure that your power source is within these
limits. If not, consult a professional electrician or your power company for a
resolution.
Do not allow the power cord to be crimped, pinched, stepped on, etc. Ensure that
the power cord does not present a tripping hazard.
These speakers have no user serviceable parts. Do not attempt to open, service,
or modify them.
Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.
Do not subject the speakers to extreme force, shock, or fluctuations in
temperature or humidity.
Remove the battery if the remote control will go unused for a long period of time.
The remote control for this device contains a Lithium battery. Dispose of the
battery only in accordance with local, state, or federal regulations for electronic
waste.
2
INTRODUCTION
Thank you for purchasing this Bluetooth Bookshelf Speaker System!
This powered speaker system features a Bluetooth radio for streaming from mobile
devices, as well as a pair of stereo auxiliary inputs with RCA connectors. It includes a
high-quality Digital-to-Analog Converter (DAC), which allows you to connect it to a
computer as a USB audio device. Each of the four drivers is powered by a dedicated
50-watt (RMS) power amplifier, ensuring that each driver gets all the power it needs. A
wireless infrared remote control is included.
FEATURES
Built-in Digital-to-Analog Converter (DAC) for use as a USB audio device
Built-in Bluetooth v3.0 radio for streaming from mobile devices
Two sets of line level stereo AUX inputs
Separate 50 watt (RMS) power amplifier for each driver (200 watts total)
Includes infrared remote control
Adjustable bass and treble controls with ±6dB range
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your
ordering, purchasing, and delivery experience is second to none. If you have any
problem with your order, please give us an opportunity to make it right. You can contact
a Monoprice Customer Service representative through the Live Chat link on our website
www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun:
9am-6pm PT) or via email at support@monoprice.com
3
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service
for a replacement.
1x Main (left) speaker
1x Slave (right) speaker
1x AC power adapter
1x Infrared remote control with installed CR2025 battery
1x Slave speaker cable
1x Stereo RCA cable
1x USB 2.0 cable
1x User's Manual
PRODUCT OVERVIEW
Speakers (Front)
1. Main (Left) Speaker: The main
speaker contains the amplifiers and
Bluetooth radio.
2. Slave (Right) Speaker: The slave
speaker is powered and controlled by
the main speaker.
3. Tweeters: One per speaker.
4. Woofers: One per speaker.
5. Status LED: The LED illuminates in various colors to indicate the selected input
and operating mode:
Solid Blue: Bluetooth input selected and actively connected to a device
Blinking Blue: The system is in Bluetooth pairing mode
Solid Green: PC mode (USB) input selected
Solid Magenta: AUX 1 input selected
Solid Yellow: AUX 2 input selected
6. Remote Control Infrared Receiver: Aim the included infrared remote control at
the main (left) speaker.
4
Loading...