Page 1
BATTERY BACKUP
for iPhone®, iPod®, and other USB Mobile Devices
15600mAh
2.1A
PID: 11931 |
USER’S MANUAL
Page 2
SAFETY WARNINGS AND GUIDELINES
Thank you for purchasing this battery back up. Please rea d
this manual thoroughly, paying extra attention to these safety
warnings. Keep this manual in a safe place for future
reference.
1. Do not expose this device to water or moisture of any kind.
Do not place items containing liquids on or near this device.
2.
Do no expose this device to excessively high temperatures.
Do not place it in, on, or near heat sources, s
fireplace, stove, radiator, etc. Do not leave it in direct
sunlight.
3. D
o not attempt to open, repair, or modify this device.
4. Keep out of reach of children.
5. This device con tains a Lithium-io n battery and shoul d be
disposed in accordanc
for the disposal of electronic devices and batteries.
6. Do not use s olvents or c hemical cl eaners on this devic e.
Clean only using a soft, dry cloth. For stubborn dirt or
stains, dampen the cloth with warm water.
7. Charge the battery before first use and at least once every
three months.
e with local laws and regulations
1
uch as a
Page 3
PACKAGE CONTENTS
1x 15600mAh backup battery/charger
1x Micro USB charging cable
1x User's manual
SPECIFICATIONS
Battery Capacity: 15600mAh
Input: 5 VDC, 1.8A
Output 1: 5VDC, 1.0A
Output 2: 5 VDC, 2.1A
Charge Cycles: > 500
Dimensions: 3.0" x 0.8" x 5.5" (75 x 21 x 140 mm)
Operating Temperature: +32 ~ +131°F (0 ~ +55°C)
Protection: Over charge, over discharge, over current, and
short circuit protection
OVERVIEW
a. Charge level LEDs
b. Power switch
c. LED flashlight
d. Micro USB input
e. USB output 2
f. USB output 1
2
Page 4
CHARGING
Using the included micro USB cable, plug the backup battery
into a 5 VDC USB charging source, such as a wall charger,
computer port, etc.
For fastest charging, use a source that is capable of
producing at least 2.0 amps of charging power. The nominal
charging time using a 2.0A source is about 11 hours.
During charging, the four charge level indicators will show
the current charge level.
Note that the battery should be charged before us
3
e.
Page 5
OPERATION
To check the current charge level, press the power button.
The LEDs will illuminate to indicate the charge level.
To charge a device, simply plug it into the backup
battery/charger. It will detect the device and will start
charging.
Alternatively, press the power button to turn the backup
battery/charger on and then plug the device you want to
charge into it. The backup battery will power off after 30
seconds if it is not con
Press and hold the power button for about 2 seconds to turn
the flashlight on/off.
Note that it is normal for the battery to become warm to the
touch when it is charging another device or is being charged.
nected to a device for charging.
4
Loading...