Please read this entire manual before using this device, paying extra
attention to these safety warnings and guidelines. Please keep this
manual in a safe place for future reference.
This device is intended for indoor use only.
Do not expose this device to water or moisture of any kind.
Do not place drinks or other containers with moisture on or
near the device. If moisture does get in or on the device,
immediately unplug it from the power outlet and allow it to
fully dry before reapplying power.
Do not touch the device, the power cord, or any other
connected cables with wet hands.
Do not subject the product to extreme force, shock, or
fluctuations in temperature or humidity.
Before plugging the unit into a power outlet, ensure that the
outlet provides the same type and level of power required by
the device.
Prior to operation, check the unit and power cord for physical
damage. Do not use if physical damage has occurred.
Unplug this device from the power source when not in use.
2
Page 3
Take care to prevent damage to the power cord. Do not allow
it to become crimped, pinched, walked on, or become
tangled with other cords. Ensure that the power cord does
not present a tripping hazard.
Never unplug the unit by pulling on the power cord. Always
grasp the connector head or adapter body.
Ensure that power is turned off and disconnected before
making any electrical connections.
Clean using a soft, dry cloth only. Do not use chemical
cleaners, solvents, or detergents. For stubborn deposits,
moisten the cloth with warm water.
This device has no user serviceable parts. Do not attempt to
open, service, or modify this device.
INTRODUCTION
This 3G-SDI to HDMI® Converter allows you to view professional
SMPTE video on a commercial quality HDMI display. It supports the
SD-SDI, HD-SDI, and 3G-SDI, which translates to HDMI video
resolutions from 525i to 1080p@60Hz. It supports Deep Color up to
12-bits per channel (36-bit total) and up to eight channels of digital
audio at a 48k sampling rate. It includes an SDI loop output with re-
clock functionality, allowing multiple units to be cascaded.
3
Page 4
FEATURES
Supports SD-SDI, HD-SDI, and 3G-SDI video inputs
Outputs HDMI® video at resolutions up to 1080p@60Hz
Includes an SDI output with re-clock functionality
Supports 8-bit, 10-bit, and 12-bit per channel Deep Color
Supports the RGB, YCbCr 4:4:4, and YCbCr 4:2:2 color spaces
Supports data rates from 270Mbps ~ 2.97Gbps
Supports up to eight channels of digital audio at 48k
sampling rate
Supports RG-59 cable runs up to 300 meters for SD-SDI and
130 meters for HD-SDI
4
Page 5
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to
ensuring that your ordering, purchasing, and delivery experience is
second to none. If you have any problem with your order, please
give us an opportunity to make it right. You can contact a
Monoprice Customer Service representative through the Live Chat
link on our website www.monoprice.com during normal business
hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-6pm PT) or via email at
support@monoprice.com
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you
have all the items listed below. If anything is missing or damaged,
please contact Monoprice Customer Service for a replacement.
1x 3G-SDI to HDMI® converter
1x AC power adapter (5 VDC, 2A)
2x Mounting brackets
4x Mounting screws
1x User's manual
5
Page 6
PRODUCT OVERVIEW
SDI In: BNC connector for connecting the SDI video source device
using a 75 ohm RG-59 cable (not included).
SDI Out: BNC connector for connecting an SDI video output device
using a 75 ohm RG-59 cable (not included). The output is re-
clocked, allowing multiple converters to be cascaded.
DC/5V: DC barrel connector for connecting the included AC power
adapter. The LED to the right of the connector illuminates
when power is applied.
HDMI Out: HDMI® connector for connecting an HDMI display at
resolutions up to 1080p@60Hz.
6
Page 7
SAMPLE CONNECTION DIAGRAM
INSTALLATION
1. Ensure that all devices to be connected are powered off and
disconnected from their power source.
2. Place or mount the converter in its desired location.
3. Using a High Speed HDMI® Cable (not included), plug one end
into the HDMI video input on your HDMI display, then plug
the other end into the HDMI Out connector on the converter.
4. (Optional) Using an RG-59 coaxial cable (not included), plug
one end into the SDI input on an SDI output device (e.g., SDI
display, another converter, etc.), then plug the other end into
the SDI Out connector on the converter.
7
Page 8
Model
10318
Inputs
1x SDI BNC female
Outputs
1x SDI BNC female, 1x HDMI®
female
Supported SDI Standards
SD-SDI, HD-SDI, 3G-SDI
Maximum Video Resolution
1080p@60Hz
Deep Color Support
8-bits, 10-bits, and 12-bits per
channel
5. Using an RG-59 coaxial cable (not included), plug one end
into the SDI In connector on the converter, then plug the
other end into the SDI output on your video source device.
6. Plug the DC barrel connector on the included AC power
adapter into the DC/5V connector on the converter, then
plug the adapter into a nearby AC power outlet. The LED on
the converter will illuminate, indicating that power has been
applied.
Congratulations, you have successfully installed your new 3G-SDI to
HDMI converter!
SPECIFICATIONS
8
Page 9
Maximum SDI Transmission
Distance (over RG-59 coaxial
cable)
SD-SDI: up to 984 feet (300
meters)
HD-SDI: up to 426 feet (130
meters)
Supports Color Spaces
RGB, YCbCr 4:4:4, YCbCr 4:2:2
Audio Support
Up to 8 channels at 48k
sampling rate
Input Power
5 VDC, 2A
AC Adapter Input Power
100 ~ 240 VAC, 50/60 Hz
Maximum Power Consumption
2.5 watts
Operating Temperature
+32 ~ +158°F (0 ~ +70°C)
Operating Humidity
10 ~ 85% RH, non-condensing
Storage Temperature
+14 ~ +176°F (-10 ~ +80°C)
Storage Humidity
5 ~ 90% RH, non-condensing
Dimensions
3.9" x 2.8" x 1.0"
(100 x 70 x 25 mm)
Weight
7.1 oz. (202 g)
HDMI®, the HDMI Logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
9
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.