Mono Machines SHREDDER Operating Manual
OPERATING MANUAL
SHREDDER
180
130
120
Cut
1/2”
1/4”
Cut
Cut
1/4” x 2”
Strip Cut
Cross Cut
Strip Cut
Keep in a safe place for future use!
http://www.monomachines.com
http://www.monomachines.com
Contents
1. Proper use, warranty........................................................................................................ 3
2. Safety instructions............................................................................................................ 3
3. Overview ..........................................................................................................................4
4. Dimensions ...................................................................................................................... 5
5. Transportation, installation............................................................................................... 6
6. Operator controls ............................................................................................................. 7
7. Start-up, inspecting the safety devices ............................................................................ 8
8. Malfunctions................................................................................................................... 11
9. Maintenance and care ...................................................................................................12
10. Scope of supply, accessories......................................................................................... 14
11. Technical data ................................................................................................................14
12. Electric wiring diagrams for Solo- and Combination-version .........................................15
http://www.monomachines.com
http://www.monomachines.com
1. Proper use, warranty
The shredder is exclusively designed for destroying paper, paperboard and cardboard, as well as small
quantities of store cards, credit cards, CD-ROMs and oppy disks. Its sturdy drive mechanism is not damaged
by paper clips and staples.
We provide a warranty for the device in accordance with our general sales and delivery terms. This warranty
excludes wear, damage due to improper handling, natural depreciation, and actions taken by third parties.
2. Safety instructions
Caution:
If purchased with a baler, it is prohibited to operate only one machine of a combination-version
machine. Only the combination of a document shredder and a baling press fullls the requirements
of EN 294.
• Read the operating manual before starting up the shredder.
• Do not remove or modify safety devices that provide for the safe operation of the machine.
• Observe all safety instructions attached to the machine.
• The shredder may not be operated by anyone under 16 years of age.
• Carry out inspection and maintenance regularly.
• Switch off the shredder, disconnect the power plug and call customer service in the following circumstances:
- power cables or plugs are damaged
- liquid has entered the shredder
- the shredder has been exposed to rain
- the machine does not work properly despite the operating manual having been observed
- the shredder has been damaged
Danger of injury
Do not reach into the paper feed opening.
Splinters can cause injury
Wear protective goggles when destroying diskettes, CDs and hard credit cards.
Danger of injury during intake
Do not go near the paper feed opening with long hair, loose clothing, ties, scarves,
necklaces, bracelets etc.
Do not destroy any material which might become tangled, such as tapes, binder ties or foil.
Switch off the shredder and pull out the power plug
before moving or cleaning the shredder, or any other task outside its normal scope of use.
Maintenance and service tasks may only be performed by:
• Customer service
• Trained specialist staff (such as electricians)
• An authorized service technician
http://www.monomachines.com
http://www.monomachines.com
3. Overview
2
1
7
9
10
4
8
3
5
6
1
2
3
4
5
6
7
8
9
10
Main switch (only solo-version)
Keypad
Emergency stop button
Loading tray
Left cover panel
Right cover panel
Intake conveyor,
paper feed opening
Front door
Braking swivel castors
Nameplate
http://www.monomachines.com
http://www.monomachines.com
4. Dimensions
61.6
64.8
47.5
31.6
45.5
„
„
„
„
„
Solo version
64.7
64.8
47.5
31.6
45.5
„
„
„
„
„
Combi version
31.6
49.7
64.8
„
„
„
31.5
7.9
61.3
7.9
95
„
„
„
„
„
Transportation dimensions (without tray) Space requirements for operation and
maintenance
http://www.monomachines.com
http://www.monomachines.com
5. Transportation, installation
• Place the shredder in its packaging on a smooth, level surface.
• Remove the packaging.
• Roll the Shredder off the pallet.
• If you need to move the shredder through narrow doors, you can wait until it is at its nal location before
tting the loading tray. Without the tray, the machine is only 31.5“ wide.
• The shredder can be moved on its rollers.
• When moving the shredder use caution; remember the high center of gravity.
• The shredder may only be placed in dry rooms on a hard, level oor — not on carpets. The oor load on
each roller is approximately 396.8 lbs.
• If using a forklift to transport the machine, you must rst remove the waste trolley. Then you can push the
forks under the machine from the left or right side and lift up.
• Place the machine in such a way that the power plug is easily accessible and the ventilation slots are free.
• Fitting the loading tray:
Fasten the tray on both sides at the top with the Phillips screws (1) and at the bottom with the 2 nuts (2).
1
2
•
Solo machine:
- Lock the front castors by pressing down the brake lever.
- Connect the power plug of the shredder to the 32A CEE main socket.
•
Combination version:
- The assembly of the shredder with the baling press is described in the operator‘s manual of the Shredder
press combination.
• The machine must be connected to a power source which meets the specications on the nameplate.
• Make sure the power cable is unobstructed and that nobody can tread on it.
• No platforms or other raised surfaces may be placed near the shredder if they encroach on the specied --
safety clearances.
http://www.monomachines.com
http://www.monomachines.com
..
g~
•
6. Operator controls
Main switch (only Solo-version)
In the "0" position, the shredder is switched off. The main switch can be secured with a
padlock.
In the "I" position, the machine is ready for operation.
Emergency stop button
In the event of danger, press the emergency stop button immediately!
This switches off the shredder, and stops the cutting block and feed belt.
Paper jam or overload
Red LED
Door open
Red LED
Keypad
Ready for operation
Green LED
Waste bag full
Red LED
Start button
The shredder switches on.
The feed belt moves in the intake
direction.
Stop button
The cutting block and feed belt stop.
The shredder is in standby mode.
Reverse button
The cutting block and feed belt run in
reverse.
http://www.monomachines.com
http://www.monomachines.com
Loading...