Monolith M-TWE Quick Start Guide

M-TWE TrueWireless Earphones
with Sonarworks™ SoundID™
P/N 41500
User's Manual
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device,
paying extra attention to these safety warnings and
guidelines. Please keep this manual in a safe place for future
reference.
This device is intended for indoor use only.
Do not expose the charging case to water or
moisture of any kind. Do not place drinks or other
containers with moisture on or near it. If moisture
does get in or on the charging case, immediately
remove it from its power source and allow it to fully
dry before reapplying power.
The earphones carry an IPx4 waterproof rating, which
means that they can safely withstand rain and
splashing water. Do not immerse them in water or
subject them to more forceful water streams.
Do not subject the product to extreme force, shock,
or fluctuations in temperature or humidity.
Do not use this device while operating a motor
vehicle, heavy equipment, walking in traffic, or any
other situation in which situational awareness is a
key to safety.
Do not expose this device to excessively high
temperatures. Do not place it in, on, or near a heat
source, such as a fireplace, stove, radiator, etc. Do
not leave it in direct sunlight.
Charge the battery before first use and at least once
every three months to keep the battery fresh and
capable of holding the full charge.
Clean using a soft, dry cloth only. Do not use
chemical cleaners, solvents, or detergents. For
stubborn deposits, moisten the cloth with warm
water.
This device has no user serviceable parts. Do not
attempt to open, service, or modify this device.
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated
to ensuring that your ordering, purchasing, and delivery
experience is second to none. If you have any problem with
your order, please give us an opportunity to make it right.
You can contact a Monoprice Customer Service
representative through the Live Chat link on our website
www.monoprice.com or via email at
support@monoprice.com. Check the website for support
times and links.
4
PACKAGE CONTENTS
Please take an inventory of the package contents to ensu re
you have all the items listed below. If anything is missing or
damaged, please contact Monoprice Customer Service for a
replacement.
1x Pair TrueWireless™ Earphones with Medium Eartips
1x Charging Case
1x Soft Pouch
4x Pairs Sized Eartips (XS, S, L, XL)
1x USB Type-A to Type-C® Charging Cable
1x User's Manual
PRODUCT OVERVIEW
5
QUICK START GUIDE
1. Open the charging case and remove the earphones.
They will automatically power on when removed
from the charging case.
If the earphones are not already paired or if they
have been paired with a device that is either
powered off or out of range, they will
automatically enter pairing mode.
If the earphones have already been paired with a
device and that device is powered on and within
range, they will automatically connect to the
paired device.
2. Open the Bluetooth® settings on your device and
scan for nearby Bluetooth devices. Locate and select
the MP41500 entry. This will pair and connect your
device with the first earphone.
3. After a few seconds a Bluetooth pairing request pop-
up menu will appear. Press the PAIR button to
connect the second earphone.
BLUETOOTH PAIRING
Perform the following steps to manually pair your Bluetooth
device with the
1. Remove both earphones from the charging case.
They will power on automatically.
6
2. Momentarily press
the touch pad on
either earphone
twice, then press
and hold it for 2
seconds.
3. Open the
Bluetooth® settings on your device and scan for
nearby Bluetooth devices. Locate and select the
MP41500 entry. This will pair and connect your device
with the first earphone.
4. After a few seconds a Bluetooth pairing request pop -
up menu will appear. Press the PAIR button to
connect the second earphone.
CLEARING BLUETOOTH PAIRING
Perform the following steps to clear the Bluetooth® pairi ng
from the earphones.
1. Remove both earphones from the charging case.
They will power on automatically.
2. Momentarily press the touch pad on either earphone
twice, then press and hold it for 2 seconds.
3. Press and hold the touch pad on either earphone
until the LEDs flash red 3 times.
4. Place the earphones back in the charging case and
leave them there for at least 10 seconds. The pairing record is now cleared.
7
VOLUME CONTROL
Swipe up on the touch pad on either earphone to
increase the volume level.
Swipe down on the touch pad on either earphone to
decrease the volume level.
NOISE CANCELLATION/AMBIENT
MODES
Momentarily press the touch pad on either earphone to
cycle through the Noise Cancellation , Ambient Sound, and
All Off Modes. Note that when powered on, the earphones
are automatically set to Noise Cancellation Mode.
8
Noise Cancellation Mode: The noise cancelling
technology and optimized passive isolation can
suppress wide-band ambient noise.
Ambient Sound Mode: This mode allows you to hear
ambient sounds around you while wearing the M-
TWE earphones.
CALL AND PLAYBACK CONTROL
LED INDICATIONS
9
CHARGING
Note that the battery should be fully charged before first
use and at least once every 3 months.
Using the included USB
charging cable, plug one end
into the charging case, then
plug the other end into a USB
power source (not included),
such as a computer, wall
charger, etc.
5 minutes of charging time results in 1 hour of
playback time. The earphones can hold a sufficient
charge for 10 hours of playback time, plus an
additional 20 hours with the charging case.
10
SOUNDID FROM SONARWORKS
These earphones support the SoundID™ from Sonarworks™
app for iOS® and Android devices, which allows you to
create a custom sound profile to personalize your
earphones to your unique hearing
preferences.
1. To use SoundID, first
download the app from the
Apple® App Store® or
Google™ Play™. You can scan
the QR code to the right to
get to the appropriate store
page for your device.
2. Open the app, then locate and select the Monolith
M-TWE entry.
3. Complete several quick listening tests to create your
custom SoundID profile to enjoy sound
personalization wherever you go. You can always
return to SoundID app to personalize your sound
profile even more
11
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical
support to assist you with any questions you may have
about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your
new product, please come online to talk to one of our
friendly and knowledgeable Tech Support Associates.
Technical support is available through the online chat
button on our website www.monoprice.com or through
email by sending a message to tech@monoprice.com.
Check the website for support times and links.
SPECIFICATIONS
Model
41500
Drivers
10mm neodymium
dynamic drivers
Frequency Response
20Hz ~ 20kHz
Supported Audio Codecs
SBC, AAC, aptX™
Microphone Noise
Cancellation
cVc™ 8.0 Bluetooth® Version
5
Supported Bluetooth
Profiles
A2DP v1.3, AVRCP v1.6,
HFP v1.7, HSP v1.2
12
Bluetooth Frequency
Range
2.402 ~ 2.480 GHz
Bluetooth® Transmission
Power
< 8.0dBm Bluetooth Pairing Name
MP41500
Waterproof Protection
Level (earphones only)
IPx4
Playback Time
Up to 10 hours, plus an
additional 20 hours with
the charging case
Charging Time
A 5 minute charge results
in 1 hour of playback time.
Less than 2 hours are
required for a full charge.
Earphone Weight (each)
0.23 oz. (6.6g)
Total Weight (earphones
and charging case)
2.70 oz. (76.6 g)
13
REGULATORY COMPLIANCE
Notice for FCC
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Modifying the equipment without Monoprice's
authorization may result in the equipment no longer
complying with FCC requirements for Class B digital
devices. In that event, your right to use the equipment may
be limited by FCC regulations, and you may be required to
correct any interference to radio or television
communications at your own expense.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
14
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
Radio Notice for FCC
Caution
This FCC Part 15 radio device operates on a non-interference
basis with other devices operating at this frequency. Any
changes or modification to said product not expressly
approved by Monoprice, including the use of non-approved
antennas, could void the user’s authority to operate this
device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
15
Notice for Industry Canada
This Class B digital apparatus complies with Canadian ICES -
003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Radio Notice for Industry Canada
Caution
This IC RSS-210 radio device operates on a non-interference
basis with other devices operating at this frequency. Any
changes or modification to said product not expressly
approved by Monoprice, including the use of non-approved
antennas, could void the user’s authority to operate this
device.
This device complies with IC RSS-210. Operation is subject
to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
16
Monoprice™, Monolith™, the Monolith logo, and all
Monoprice logos are trademarks of Monoprice Inc.
Qualcomm® is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX™, TrueWireless™, cVc™, and the aptX logo are trademarks of Qualcomm Technologies International, Ltd., in the United
States and other countries. Qualcomm® aptX™, cVc™, and TrueWireless™ are products of Qualcomm Technologies
International, Ltd.
Sonarworks™, SoundID™, and the SoundID logo are trademarks of Sonarworks SIA.
USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum, Inc.
The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc.
Cisco® and IOS® are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
Google™, Android™, Google Play™, and the "Get It On Google Play" logo are trademarks of Google LLC.
Apple®, App Store®, and the "Download on the App Store" logo are trademarks of Apple Inc., registered in the U.S. and other countries.
Loading...