Monogram ZVC30LSS Specifications
MONOGRAM 30" CUSTOM HOOD INSERT ZVC30LSS
ZVC30 and ZVC36
ZVC30 and ZVC36
Liner sizes
Custom Insert Liner
Opening
The custom canopy must be sized to fit the
insert sleeve. Construct the canopy with an
opening that is: 26"W x 13-3/16"D
The opening must be constructed of 3/4" thick
material to allow the sleeve locking clips to
engage.
The Supplied Liner
1-1/4"
7-1/2"
28-1/2"
1/2"
Dimensions and Specifications (in inches)
Outside Dimensions
27-1/2"
14"
The Insert Sleeve
16-3/4"
13"
14"
1/2"
7/8"
13"
25-3/4"
4"
A stainless steel liner is shipped with each
hood insert. This non-combustible liner
protects the underside of the canopy.
Custom Liner
If you are not using the supplied liner, you may
construct a custom non-combustible liner. Use
the supplied liner as a template. The opening
must be 26"W x 13-3/16"D. 3/4" thick material
must surround the opening to allow the sleeve
locking clips to engage. The insert sleeve inside
the cabinet should be positioned 1/2" from the
rear wall so that the center of the 8" duct is
5-1/2" from the rear wall.
21-1/4"
1/2"
The bottom edge of the insert sleeve has a
7/8" wide flange on the sides and a 1/2" wide
flange on the front and back.
Remote Location for the Control
The control may be removed from the hood
and installed into a wall or countertop. A 30ft length of wire is supplied to accommodate
most installations. A blanking plate covers the
opening when the controls are removed. The
overall size of the control is 4-1/4" wide and
2-1/4" deep.
3'-11/16"
1'-11/16"
We recommend that the cutout in granite
or other hard surfaces be made before the
countertop is installed.
Control Cutout
Product Specification Revised 1/18
MONOGRAM 30" CUSTOM HOOD INSERT ZVC30LSS
ZVC30 and ZVC36
FEATURES AND BENEFITS
PATENTED INSTALLATION PROCESS
Makes the insert ideally suited to a wide variety of
custom hood applications; with easy and secure
connection to the ventilation duct
550 CFM BLOWER
Helps eectively remove smoke, grease, odors and
moisture
CONTROL WITH ADA COMPLIANT REMOTEMOUNT OPTION
Can be removed and relocated to a more
convenient location, such as a wall or countertop
BLOWER, LINER AND FILTERS INCLUDED
No additional components or accessory kits
required
TWO HALOGEN LIGHTS
Provide four levels of illumination over the cooking
surface
TWO STAINLESS STEEL MESH FILTERS
Trap airborne grease particles and can easily be
removed for dishwasher-safe cleaning
Product Specification Revised 1/18
Loading...