ZV830SMSSMONOGRAM 30" WALL-MOUNTED VENT HOOD
DIMENSIONS AND INSTALLATION INFORMATION
(IN INCHES)
THIS VENT HOOD IS DESIGNED TO BE INSTALLED ON
A WALL AND VENTED TO THE OUTDOORS, OR IT CAN
BE INSTALLED FOR RECIRCULATING OPERATION. ALL
NECESSARY PARTS FOR RECIRCULATING OPERATION
ARE SUPPLIED WITH THE HOOD. NO KITS REQUIRED.
MUST USE AN 8" ROUND DUCT, NOT SUPPLIED WITH
PRODUCT.
A decorative duct cover is provided to enclose the
duct from the top of the hood to a 8' to 10' ceiling.
ACCESSORIES
An optional stainless steel duct cover is available for
12' ceiling heights. Order ZX83012 optional duct cover
at the same time as the vent hood and have on site
before installation.
DIMENSIONS AND CLEARANCES
The vent hood should be installed 24" min. and 30" max.
above the cooking surface. The cooking surface should
be at least 36" above the floor. Installation will be easier
if the vent hood is installed before the range or cooktop/
countertop is installed.
This hood can be installed over a Monogram electric or gas
cooktop.
10-7/8
*Height
to
Ceiling
13-1/4
5-7/8
29-7/8
18-7/8
*The Supplied Duct Cover Fits 8' to 10' Ceiling Heights.
INSTALLATION INFORMATION
Before installing, consult installation instructions packed
with product or available on monogram.com for current
dimensional data.
24” Min.
30” Max.
Listed by
Underwriters
Laboratories
Product Specification Revised 2/18
FEATURES AND BENEFITS
STAINLESS STEEL DESIGN
Creates a striking architectural impression with bold
angles and smoothly finished edges
POWERFUL VENTILATION
Oers three speeds plus a 420-cfm boost to capture
cooking fumes produced by 30" cooktops
PERIMETER FILTER SYSTEM
Draws fumes and vapors around a stainless steel
center panel, which completely and stylishly
conceals filters
HALOGEN LIGHTING
Provides four levels of clean, brilliant illumination to
suit the cooking task or occasion
ZV830SMSSMONOGRAM 30" WALL-MOUNTED VENT HOOD
RECIRCULATING-READY DESIGN
Includes reversible duct covers for non-vented
installations, eliminating the need for an optional kit
Listed by
Underwriters
Laboratories
Product Specification Revised 2/18