Monogram 30" Built-In Advantium® 240
OVERALL DIMENSIONS
SPECIFICATIONS
Overall Width 29 3/4" (75.6 cm)
Overall Height 19" (48.3 cm)
Overall Depth
Oven Door Clearance 19" (48.3 cm) Min
Overall Oven
Interior Capacity
Oven Interior Dimensions
(W x H x D)
Minimum Cabinet Width 30" (76.2 cm)
Minimum Cabinet Depth 21 1/2" (54.6 cm)
Minimum Base Support 130 lbs (59 kg)
Cutout Width 25 1/4" (64.1 cm) Min
Cutout Height
Cutout Depth 21 1/2" (54.6 cm) Min
Voltz/Hertz/Amps 240/208 VAC, 60 Hz, 30A
Conduit Length 48" (121.9 cm)
Electrical Rating
Total Amps
Shipping Weight 87 lbs (39.5 kg)
21 1/2" (54.6 cm)
1.6 cu. ft. (.05 cu. cm)
20 1/16" x 8 1/2" x 17"
(51 cm x 21.6 cm x 43.2 cm)
17 1/2" (44.5 cm) Min
4.72 kW at 208V
6.3 kW at 240V
29 3/4" (75.6)
FRONT VIEW (SHOWING CUTOUT OVERLAP)
23" (58.4)
21 1/2" (54.6)
2 1/4" (5.7)
5 3/4" (14.6)
19"
(48.3)
SIDE VIEW
2.5"
(6.3)
24 3/4" (62.9)
ZSC2201JSS
4 1/4"
(10.8)
6 3/4"
(17.1)
4 1/2"
(11.4)
14 1/2"
(36.8)
ATTENTION ELECTRICIAN:
A 240/208V, 60Hz, 30 Amp circuit is required. An
individual properly grounded branch circuit or
circuit breaker is required. Hardware junction box
is required for built-in product.
25 3/4"
(65.4)
2 3/4"
(7.0)
Dimensions in parentheses
are in centimeters unless
otherwise noted. Actual
product dimensions may
vary due to manufacturing
tolerances.
TOP VIEW
OPEN OVEN DOOR
SHOWING DOOR CLEARANCE
Product Specification Revised 11/15
13"
(33.0)
min
TOP VIEW
30 1/2" (77.5) flush inset width
with 1/4"
(0.6) reveals
Side cleats
25 1/4" (64.1)
cutout width
ELECTRICAL
23 1/2" min
(59.7)
cutout depth
Bottom cleat
Top cleat
Side cleat
FLUSH INSET
INSTALLATION
FLUSH INSET INSTALLATION
FRONT VIEW
ZSC2201NSS
Monogram 30" Built-In Advantium® 240 ZSC2201JSS
WALL INSTALLATION
17 1/2"
(44.5)
32 1/2"
(82.6)
Recommended
cutout
location
from floor
A
21 1/2" min
(54.6)
cutout depth
NOTES
A
Based on a user height
of 5' 6" to 5' 10"
STANDARD
INSTALLATION
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
Product Specification Revised 11/15