MONOGRAM 36" BUILT-IN
FRENCH-DOOR REFRIGERATOR
ZIPS360NNSS
When ordering this product,
be sure to use the model number
associated with the chosen handle.
Statemenet handle
ZKSB2H2PNSS
STATEMENT HANDLE
Model is shown with the Statement
handle, which needs to be ordered
separately. To order this handle use
model number ZKSB2H2PNSS.
MINIMALIST HANDLE
Model is shown with the Minimalist
handle, which needs to be ordered
separately. To order this handle use
model number ZKSB2H2CNSS.
FRENCH-DOOR DESIGN
Gives you wide-open access to every fresh food
shelf and bin
FINELY CRAFTED GLASS-FRONT
METAL DOOR BINS
With riveted metal accents offer easy access to beverages
and quick-gra b items
LED LIGHTING
Positioned throughout the interior and under fresh food drawers
spotlights food inside the refrigerator a nd in the freezer
Minimalist handle
ZKSB2H2CNSS
LARGE FULL-EXTENSION FREEZER DRAWER
Has storage bins that slide out independently of one
another for easy loading a nd unloading. An automa tic
icemaker keeps plenty of filtered ice on hand
PRECISION GLASS-FRONT PRODUCE
AND DELI DRAWERS
Feature full-extension, soft-close slides
ALUMINUM TRIMMED GLASS SHELVES
Allow convenient access to contents in the
fresh-food compartment
UPFRONT ELECTRONIC CONTROLS
WITH DIGITAL READOUT
Offer a ra nge of precise temperature settings, all within
easy reach
For questions about your
appliance, please call 1-800-626-2000.
PAGE 1 OF 3
Product Specication Created 10/19
OVERALL DIMENSIONS
(213.4)
36" (91.4)
25 15/16" (65.9)
23 5/8" (60.0)
SPECIFICATIONS
Overall Width 36" (91.4 cm)
Overall Height 84" (213.4 cm)
Overall Depth 25 15/16" (65.9 cm)
Door Clearance 18 1/2" (47cm)
Cutout Width 35 1/2" (90.2 cm)
Cutout Height 83 1/2"- 84 1/2"
(212.1-214.6 cm)
Cutout Depth 24" (61 cm)
Plumbing Requirements 1/4" OD copper tubing
or GE SmartConnect kit
Shipping Weight 715 lb (324 kg)
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply is required.
An individual properly grounded branch circuit or circuit
breaker is recommended. Install a properly grounded
3-prong electrical receptacle recessed into the back wall.
10"
(25.4)
5/8"
(1.6)
*84"
9/16"
(1.4)
34 7/16"
(87.5)
*26 9/16"
*25 1/8"
(63.8)
*29 9/16"
(67.5)
*73 3/8"
(75.1)
(186.4)
FRONT VIEW SIDE VIEW
* Shipping height. Use leveling legs and wheels for
maximum 1" height adjustment from shipping height.
Door
Angle
90°
115 °
130°
Dim A
(7.5)
2 15/16"
9 1/4" (23.5)
12 5/16" (31.3)
Dim A
4 9/16" (11.6)
min clearance to a wall
for 90º door swing
35" (88.9)
Case width
4 9/16" (11.6)
min clearance to a wall
for 90º door swing
TOP VIEW
(SHOWING DOOR SWING)
2 9/16"
(6.5)
*4 5/16"
(11.0)
Dim A
18 1/2"
(47.0)
*83 1/2"
(212.1)
For questions about your
appliance, please call 1-800-626-2000.
Dimensions in parentheses a re in centimeters unless otherwise noted.
Actual product dimensions may vary due to ma nufacturing tolerances.
Product Specication Created 10/19PAGE 2 OF 3
35 1/2" (90.2)
2 5/16"
(5.9)
*83 1/2" min
*84 1/2" max
(212.1-214.6)
*Trim will overlap
additional 7/16"
3 1/2"
(8.9)
75"
(190.5 )
From floor
to bottom
of electrical
area
23 5/8" (60)
2 3/8"
(6)
7/16"
(1.1)
Trim overlap
4 7/8"
(12.4)
SIDE VIEWFRONT VIEW
ELEC.
6"
(15.2)
10"
(25.4)
FRONT VIEW
WATER
5"
(12.7)
5"
(12.7)
3 1/2"
(9.0)
WATER
10" (25.4)
35 1/2"
*83 1/2
*84 1/2
*Trim will overlap
23 5/8"
4 7/8"
DUAL INSTALLATIONS
2 5/16"
(5.9)
ELEC.
HELPFUL TIPS
A
A
(90.2)
6"
(15.2)
(12.4)
2 3/8"
(6)
(60)
7/16"
(1.1)
Trim overlap
Mounting the junction box in this
location will also allow for front
accessibility through access panel.
B
Water supply a rea
" min
" max
(212.1-214.6)
additional 7/16"
ANTI-TIP BRACKET
10"
(25.4)
5"
(12.7)
FRONT VIEW
WATER
3 1/2"
(9.0)
81 1/2"
(207.0)
WARNING:
e refrigerator is top heavy a nd
must be secured to prevent the
possibility of tipping forward.
Failure to do so may result in
75"
(190.5 )
From floor
to bottom
of electrical
area
B
3 1/2"
5"
(12.7)
(8.9)
10" (25.4)
WATER
death or serious injury.
e information below is for
cabinet design only. When
installing the anti-tip system
you must use the product
installation instructions.
e information below applies to all
installation constructions:
• A wall bracket, bolts and toggles will
be supplied with the unit.
SIDE VIEWFRONT VIEW
• e bolts will be used to attach
bracket to wall in 4 locations. Two
of the locations must penetra te the
center of the wall studs.
• e toggles are used for sta bility in
drywall and when metal studs a re
encountered. Lag bolts are used in
wood studs.
• In installation opening, measure
81-1/2" from
floor and draw a horizontal line.
• Locate a nd mark the wall studs on
horizontal line. Verify at least two
studs have their centerlines within
the center 32-1/2"
Use two
additional hole
locations at
end of
brackets
C
L
Bracket
mounted
into vertical
wall studs
Ensure holes
selected are
centered on
the studs
Wall
Studs
of installation opening to ensure 2
wall studs are penetra ted.
SIDE VIEW INSTALLED
WITH ANTI-TIP BRACKET
For questions about your
appliance, please call 1-800-626-2000.
FRONT VIEW OF CUTOUT
WITH ANTI-TIP BRACKET
• e bracket will be centered left
to right in opening with bottom of
bracket on the horizontal line.
• When unit is placed in opening, the
bracket tabs will align with openings
in back of the unit. e unit will be
secured to the bracket using supplied
“L” bolts.
See Installation Instructions for
detailed instructions.
Product Specication Created 10/19PAGE 3 OF 3
Loading...