ADA
MONOGRAM 27" BUILT-IN SINGLE OVEN
ZKS90DSSNSS
COMPLIANT
THE MONOGRAM MINIMALIST COLLECTION
Streamlined design a nd precisely machined metals create a
contemporary yet functional aesthetic
LCD CONTROLS
Allow you to adjust oven settings with little effort
WIFI CONNECT
Perfectly in sync with a busy lifestyle, Alexa or Google Home
can be used to control a n array of oven functions from both
inside and outside the home
SCAN-TO-COOK
Innovative a nd time saving, scan-to-cook technology ensures
that packaged foods a re always prepared correctly. A simple
scan of the ba rcode with a sma rtphone delivers consistently,
delicious results
TRUE EUROPEAN CONVECTION
Achieve delicious results from a third hea ting element and
fan combina tion
4.3 CUBIC FOOT CAPACITY
Accommodates even the la rgest meals
EXCLUSIVE SELF-CLEAN (3 REGULAR)
OVEN RACKS
Glide in and out smoothly on sta inless steel ball
bearings, a nd are designed to be left in the oven during
the self-clean cycle
TEN-PASS BAKE ELEMENT
Covers more surface area for more even baking results
EIGHT-PASS BROIL ELEMENT
Provides complete coverage and even browning, even for
large dishes
SELF-CLEAN WITH STEAM CLEAN OPTION
Gives you flexible options for thorough oven cleaning
For questions about your
appliance, please call 1-800-626-2000.
PAGE 1 OF 4
Product Specication Created 10/19
OVERALL DIMENSIONS
ZEK7000SHSS
26 3/4" (68.0)
3/4"
(1.9)
min cutout width
25" (63.5)
5 1/4"
(13.4)
SPECIFICATIONS
Overall Width 26 3/4" (68.0 cm)
Overall Height 28 13/16" (72.2 cm)
Overall Depth Including Handle 26 13/16" (68.1 cm)
Oven Door Clearance 20 9/16" (52.2 cm)
Overall Oven Interior Capacity 4.3 cu. ft. (121.8 liters)
Oven Interior Dimensions
(W x H x D)
Minimum Cabinet Width* 27" (76.2 cm)
Minimum Cabinet Depth* 24" (61.0 cm)
Minimum Base Support 220 lbs. (99 kg)
Cutout Width*
Cutout Height*
Cutout Depth* 23 1/2" (59.7 cm) Min
Volts/Hertz/Amps 240/208 V AC, 60 Hz, 20A
Conduit Length
Electrical Rating
Shipping Weight 140 lbs. (64 kg)
* Additional space will be needed for ush installation.
ATTENTION ELECTRICIAN:
A 240/208V, 60Hz, 20 Amp circuit is required. An individual
properly grounded branch circuit or circuit breaker is required.
Hardware junction box is required for built-in product.
21 1/2" x 17-1/4" x 20"
(54.6 x 43.8 x 50.8 cm)
25" (63.5 cm) Min
25 1/4" (64.1 cm) Max
27 5/8" (70.2 cm) Min
28 1/8" (71.4 cm) Max
48" (72" available special
order: WB18T10398)
2.7 kW at 208V
3.6 kW at 240V
27 5/8"
(70.2) min
cutout height
7/16"
(1.1)
FRONT VIEW (SHOWING CUTOUT OVERLAP)
24 11/16" (62.7)
1 3/8" (3.5)
28 13/16"
(73.2)
5 7/8"
(14.9)
14 15/16"
(38.0)
8 3/8"
(21.3)
SIDE VIEW
25" (63.5)
TOP VIEW
OPEN OVEN DOOR
9 3/8"
(24.0)
26 13/16"
(68.1)
2 1/8"
7/8"
(2.2)
(5.4)
SHOWING DOOR CLEARANCE
23 5/16"
1 7/8"
(4.7)
7/8"
(2.2)
8 3/8"
(21.4)
20 9/16"
(52.2)
min
(59.2)
3 1/2"
(8.8)
For questions about your
appliance, please call 1-800-626-2000.
Dimensions in parentheses a re in centimeters unless otherwise noted.
Actual product dimensions may vary due to ma nufacturing tolerances.
Product Specication Created 10/19PAGE 2 OF 4
ZEK7000SHSS
27" (68.6) flush inset width
with
1/8" (0.3) reveals
27" (68.6)
1 3/8"
(3.5)
27 5/8"
(70 .2)
32 1/2"
(82.6)
Recommended
cutout
location
from floor
Side cleat
Top cleat
Bottom cleat
5 1/4"
(13.3)
9 1/2"
(24.1)
25" (63.5)
cutout width
1"
(2.5)
Side cleats
7/8"
(2.2)
Top cleat
9/16" (1.4)
Bottom cleat
(Extends full depth of cabinet)
29 1/16"
(73.8)
Flush inset
height with
1/8" (0.3)
reveal at top
and bottom
24 7/8" (63.1)
cutout depth
23 1/2"
(59.7)
min cutout depth
2 1/2"
(6.4)
Side cleats
depth
TOP VIEW
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
FLUSH INSET INSTALLATION
FRONT VIEW
ZEK7000SHSS
ELEC.
WALL INSTALLATION
27 5/8"
(70 .2)
32 1/2"
(82.6)
Recommended
cutout
location
from floor
A
23 1/2"
min cutout depth
C
STANDARD
INSTALLATION
(59.7)
24 7/8" (63.1)
cutout depth
Top cleat
Side cleat
D
FLUSH INSET
INSTALLATION
Bottom cleat
C
29 1/16"
Flush inset
height with
1/8" (0.3)
reveal at top
and bottom
TOP VIEW
1 3/8"
(3.5)
(73.8)
F
E
Side cleats
27" (68.6) flush inset width
with
1/8" (0.3) reveals
7/8"
(2.2)
Top cleat
1"
(2.5)
Side cleats
9/16" (1.4)
Bottom cleat
(Extends full depth of cabinet)
B
5 1/4"
(13.3)
25" (63.5)
cutout width
27" (68.6)
FLUSH INSET INSTALLATION
FRONT VIEW
2 1/2"
(6.4)
depth
ELEC.
9 1/2"
(24.1)
HELPFUL TIPS
A
Based on a user height of 5' 6" to
5' 10"
B
Junction box location (May also
be located in adjacent ca binet.)
C
Platform must be a ble to support
220 lbs (99 kg)
D
Cabinet surfaces must be a n
appeara nce finished surface for
flush installation.
E
Cleats may be visible a nd should
be finished to match ca binetry.
F
If using optional flush install vent
trim accessory ZX27VT1, please
adjust cutout height to 28-3/4”
and bottom cleat height to 1/4".
G
Minimum 31 1/4" from the top
C
surface of the countertop to the
top surface of the wall oven support
platform when installed benea th
a certified cooktop.
Allow 1/8" (0.3) clearances from side edges of oven door.
UNDERCOUNTER INSTALLATION
B
3
31 1/4"
(79.4) min
27 5/8"
(70.2)
G
23 1/2"
(59.7) min cutout depth
3/4" thick
platform
required
STANDARD
INSTALLATION
(7.6)
3/4"
(1.9)
STANDARD INSTALLATION
6 1/8"
(15.6)
25" (63.5)
min cutout width
ELEC.
8 3/4"
(22.2)
C
FRONT VIEW
For more details, refer to the installa tion instructions for this product on Monogram.com.
Dimensions in parentheses a re in centimeters unless otherwise noted.
For questions about your
appliance, please call 1-800-626-2000.
24 7/8"
(63.1)
cutout depth
FLUSH INSET
INSTALLATION
Product Specication Created 10/19PAGE 3 OF 4
ZET1FHSS
2" (5.1) min
2 1/2"
(6.4) min
21"
(53.3)
9 1/4"
(23.5)
2"
(5.1) min
C
L
SIDE-BY-SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
STANDARD INSTALLATION
SIDE VIEW
ELEC. ELEC.
ZEK7000SHSS
INSTALLATION WITH ADVANTIUM
AND WARMING DRAWER
A
2"
(5.1) min
2"
(5.1) min
B
STANDARD INSTALLATION
SIDE VIEW
UNDER COOKTOP INSTALLATION
H
C
31 1/4"
(79.4)
27 5/8"
L
(70.2)
3/4" thick platform
required
SIDE BY SIDE INSTALLATION
I
ELEC.
GAS
D
Wall oven
2 7/8"
(7.4) max
Junction box
can protrude
from back wall
of installation
(Not cabinet wall)
2" (5.1) min
ELEC. ELEC.
SIDE-BY-SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
J
E
ELEC.
Wall oven
GAS
Cooktop
F
J
HELPFUL TIPS
A
Dimensions per Advantium or
Microwave Oven requirements
B
Dimension per Warming Drawer
requirements
C
Note this oven is only approved
to be installed under specific
models as labeled on this unit.
D
Support platform made of 3/4"
(1.9 cm) wood is required. Must
be capable of supporting 220 lbs
(99 kg). Support Platform base
to be same height as toe kick.
E
Junction box location for wall
oven. (May also be located in
adjacent cabinet).
F
Gas regulator a nd electric
connections for cooktops must be
located in a n adjacent accessible
location to the right
G
Top and/or side fillers may be
necessary if unit is positioned
between existing cabinets. Be
sure they are a ttached securely,
since they will anchor the oven
in the cabinet.
H
For flush oven installations,
the cooktop cutout must be set
back 2 1/2" (6.4 cm) plus the
cleat setback.
I
Dimension varies based on model.
example: ZGU30 4 5/16"
K
J
Dimension varies based on model.
(11.0 cm) (from wall)
example: ZGU30 12 1/16"
(30.6 cm) (centerline)
K
Dimension varies based on model.
example: ZGU30 5" (12.7 cm)
L
From the top surface of the
countertop to the top surface of
the wall oven support platform
STANDARD INSTALLATION
FRONT VIEW
SIDE VIEW
For more details, refer to the installa tion instructions for this product on Monogram.com.
Dimensions in parentheses a re in centimeters unless otherwise noted.
For questions about your
appliance, please call 1-800-626-2000.
Product Specication Created 10/19PAGE 4 OF 4
Loading...