Monogram ZISB480DNII Specifications
MONOGRAM 48" BUILT-IN
SIDE-BY-SIDE REFRIGERATOR
ZISB480DN
WIFI CONNECT
Enjoy the convenience and freedom of wirelessly controlling
functions from your smartphone
LED LIGHTING
Light columns in the freezer and fresh food compa rtments
extend the full length of the interior and LED lighting loca ted
inside the vegetable a nd climate-control drawers illumina te
contents without compromising space
COLOR-MATCHED DISPENSER WITH
PROXIMITY SENSOR
Designed to accommodate glasswa re of all sizes, from pitchers
to tumblers; control graphics light up as you approach and
automa tically switch off when
GE® WATER FILTER
Has been moved from the fresh food compartment to
the overhead cabinet, where it is discreetly out of sight
DELI DRAWER ON FULL-EXTENSION SLIDES
Keeps meats, cheeses a nd other everyday foods within easy reach
For questions about your
appliance, please call 1-800-626-2000.
SEALED VEGETABLE DRAWER
Helps preserve the freshness of foods
ADJUSTABLE GLASS SHELVES
Easily accommodate pa rty trays and pla tters
GALLON-SIZE DOOR BIN
Holds milk containers, two-liter bottles a nd pitchers
ADJUSTABLE DOOR BINS
Can be moved to one of two positions in seven loca tions
DAIRY BIN WITH CENTER DIVIDER
Has a unique magnetic seal tha t locks in freshness
FILTER-CHANGE INDICATOR LIGHT
Located on the upfront control pa nel, provides a visual reminder
when it's time to replace the filter for the water dispenser
SABBATH MODE
Designed to disable functions in accorda nce with
Sabba th-observing practice
PAGE 1 OF 14
Product Specication Created 10/19
SECTION 1
STANDARD INSTALLATION
1/4" FRAMED PANELS 3/4" OVERLAY PANELS
SECTION 2
FLUSH INSET INSTALLATION
For questions about your
appliance, please call 1-800-626-2000.
PAGE 2 OF 14
Product Specication Created 10/19
OVERALL DIMENSIONS
48" (121.9)
STANDARD INSTALLATION
25 1/2" (64.8)
23 1/2" (59.7)
SPECIFICATIONS
Overall Width 48" (121.92 cm)
Overall Height 84" (213.36 cm)
Overall Depth 25 3/8" (64.453 cm)
Door Clearance 28 5/8" (72.1 cm)
Cutout Width 47 1/2" (120.7 cm)
Cutout Height 83 1/2" - 84 1/2"
(212.1 - 214.6 cm)
Cutout Depth 24" (61 cm)
Plumbing Requirements 1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 775 lb
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply is required. An
individual properly grounded branch circuit or circuit breaker
is recommended. Install a properly grounded 3-prong electrical
receptacle recessed into the back wall.
*84"
(213.4)
*40"
(101.6)
68 1/2"
(174.0)
*3 3/4"
(9.5)
*72 1/4"
(183.5)
*83 1/2"
(212.1)
SIDE VIEWFRONT VIEW
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
47" (119.4)
Case width
**
Allow
15" (38.1)
min clearance
for 130˚ door swing
**
Allow
20" (50.8)
min clearance
for 90˚ door swing
28 5/8"
(72.7)
TOP VIEW
** Allow 4 9/16" (11.6) min
clearance to a wall for 90˚
door swing
** These refrigerators are equipped with a 3-position door stop. The factory-set 115° door
swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted.
Allow full 130° door swings for pan removal. If the 90° door stop position is used, pan
access is maintained, but pan removal is restricted. Dimensions based on custom
handle height of 2 9/16" (6.5).
** Allow 4 9/16" (11.6) min
clearance to a wall for 90˚
door swing
For questions about your
appliance, please call 1-800-626-2000.
Dimensions in parentheses a re in centimeters unless otherwise noted.
Actual product dimensions may vary due to ma nufacturing tolerances.
Product Specication Created 10/19PAGE 3 OF 14
STANDARD INSTALLATION
FRONT VIEW SIDE VIEW
W
24" (61.0)
1 1/2"
(3.8)
3 1/4"
(8.3)
7/16"
(1.1)
Trim overlap
3 1/2"
(8.9)
E
WATER
47 1/2" (120.7)
20" (50.8)
*83 1/2" min
*84 1/2" max
(212.1-214.6)
*Trim will overlap
additional 7/16"
3 1/2"
(8.9)
75"
(190.5 )
From floor
to bottom
of electrical
area
6"
(15.2)
5"
(12.7)
5"
(12.7)
5"
(12.7)
AND NO SOFFIT
AND NO SOFFIT
STANDARD INSTALLATION
24" (61)
1 9/16"
(3.97)
SIDE VIEW
e refrigerator will project forwa rd, slightly beyond adjacent cabinetry.
7/16"
Trim overlap
3 1/2"
(8.9)
(1.1)
*Trim will overlap
*84 1/2"
(214.6)
additional 7/16"
5"
(12.7)
6"
(15.24)
ANTI-TIP BRACKET
C
SOFFIT
SIDE VIEW INSTALLED
UNDER SOFFIT
D
SIDE VIEW INSTALLED
WITH WOODEN WALL STUDS
Screws mounted
into vertical wall
*84"
(213.4)
*Or installation
height from floor
2" x 4"
Cut to 35" Length
studs
TOP VIEW
47 1/2" (120.7)
20" (50.8)
A
E
5"
(12.7)
5"
B
(12.7)
WATERW
FRONT VIEW
Top Case Trim
Install Screws
Through Trim and Into
3/4" Min. Wood Brace
FRONT VIEW INSTALLED
WITH METAL WALL STUDS
(190.5 )
From floor
to bottom
of electrical
3 1/2"
(8.9)
75"
area
E
3/4"
Min.
Side View Top
Case Trim
HELPFUL TIPS
A
Mounting the junction box in this
location will also allow for front
accessibility through access panel.
B
Water supply a rea.
WARNING:
e refrigerator is top heavy
and must be secured to prevent
the possibility of tipping forward.
Failure to do so may result in dea th
or serious injury.
e information below is for ca binet
design only. When installing the antitip system you must use the product
installation instructions.
Determine your installation construction
and required a nti-tip configuration:
C
Installed Under Soffit
After installing unit into installation
opening, raise grille pa nel and screw
metal case sides to adjacent cabinet.
When installed under a soffit, the
soffit cannot exceed 24" deep. e top
case trim overlaps the bottom
of the soffit.
D
Wooden Wall Studs and No Soffit
• Cut a 2" x 4" block and secure to
brackets provided.
• Secure brackets to back wall of
opening at 84" or your installa tion
height from the floor.
E
Metal Wall Studs and No Soffit
is method requires securely
fastened cabinets on both sides a nd
a 3/4" minimum wood brace a bove
unit, with it’s front surface 24" from
back wall.
• After installing unit into opening,
raise grille pa nel and attach metal
case top trim to 3/4" minimum
wood brace.
• e brace spanning the enclosure
must be securely fastened to
cabinets on both sides.
See Installation Instructions for
detailed instructions.
For questions about your
appliance, please call 1-800-626-2000.
PAGE 4 OF 14
Product Specication Created 10/19
CUSTOM SIDE PANELS
F
1 7/8"
*3"- 4"
(7.6 - 10.2)
*Depending
on installation
height
(4.8)
24" (61.0)
3/16"
(.5)
2 9/16"
(6.5)
*84"
(213.4)
*Depending
on installation
height
STANDARD INSTALLATION
HELPFUL TIPS
F
Side panels must be used
whenever the sides of the
refrigerator will be exposed. e
1/4" side panels will slip into the
side case trim. Secure the panels
to the refrigerator with stick-on
hook and loop fastener strips.
Order the side panels from the
cabinet ma nufacturer.
For questions about your
appliance, please call 1-800-626-2000.
PAGE 5 OF 14
Product Specication Created 10/19
Loading...