Monogram ZISB420DNII Specs

Page 1

MONOGRAM 42" BUILT-IN SIDE-BY-SIDE REFRIGERATOR

ZISB420DN

WIFI CONNECT

Enjoy the convenience and freedom of wirelessly controlling functions from your smartphone

LED LIGHTING Light columns in the freezer and fresh food compa rtments extend the full length of the interior and LED lighting loca ted inside the vegetable a nd climate-control drawers illumina te contents without compromising space

COLOR-MATCHED DISPENSER WITH PROXIMITY SENSOR

Designed to accommodate glasswa re of all sizes, from pitchers to tumblers; control graphics light up as you approach and a utomatically switch off when you walk away

GE® WATER FILTER Has been moved from the fresh food compartment to the overhead cabinet, where it is discreetly out of sight

DELI DRAWER ON FULL-EXTENSION SLIDES Keeps meats, cheeses a nd other everyday foods within easy reach

SEALED VEGETABLE DRAWER Helps preserve the freshness of foods

ADJUSTABLE GLASS SHELVES Easily accommodate pa rty trays and pla tters

GALLON-SIZE DOOR BIN Holds milk containers, two-liter bottles a nd pitchers

ADJUSTABLE DOOR BINS Can be moved to one of two positions in seven loca tions

DAIRY BIN WITH CENTER DIVIDER Has a unique magnetic seal tha t locks in freshness

FILTER-CHANGE INDICATOR LIGHT Located on the upfront control pa nel, provides a visual reminder when it's time to replace the filter for the water dispenser

SABBATH MODE Designed to disable functions in accorda nce with Sabba th-observing practice

For questions about your appliance, please call 1-800-626-2000.

PAGE 1 OF 14

Product Specication Created 10/19

Page 2

SECTION 1

STANDARD INSTALLATION

1/4" FRAMED PANELS 3/4" OVERLAY PANELS

SECTION 2

FLUSH INSET INSTALLATION

For questions about your appliance, please call 1-800-626-2000.

PAGE 2 OF 14

Product Specication Created 10/19

Page 3

OVERALL DIMENSIONS

42" (106.7)

STANDARD INSTALLATION

25 1/2" (64.8)

23 1/2" (59.7)

SPECIFICATIONS

Overall Width 42" (106.7 cm)

Overall Height 84" (213.36 cm)

Overall Depth 25 3/8" (64.453 cm)

Door Clearance 26 9/16" (67.5 cm)

Cutout Width 41 1/2" (105.4 cm)

Cutout Height 83 1/2" - 84 1/2"

(212.1 - 214.6 cm)

Cutout Depth 24" (61 cm)

Plumbing Requirements 1/4" OD copper

tubing or GE SmartConnect kit

Shipping Weight 725 lb (328.9 kg)

ATTENTION ELECTRICIAN:

A 115 volt 60Hz., 15 or 20 amp power supply is required. An individual properly grounded branch circuit or circuit breaker is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall.

*84"

(213.4)

*40"

(101.6)

68 1/2"

(174.0)

*3 3/4"

(9.5)

*72 1/4"

(183.5)

*83 1/2"

(212.1)

SIDE VIEWFRONT VIEW

* Shipping height. Use leveling legs and wheels for maximum 1" height adjustment from shipping height.

41" (104.2)

Case width

Allow

13" (33.0)

min clearance for 130˚ door swing

Allow

19" (48.3)

min clearance for 90˚ door swing

26 9/16"

(67.5)

TOP VIEW

** Allow 4 9/16" (11.6) min clearance to a wall for 90˚

door swing

** These refrigerators are equipped with a 3-position door stop. The factory-set 115° door

swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted. Allow full 130° door swings for pan removal. If the 90° door stop position is used, pan access is maintained, but pan removal is restricted. Dimensions based on custom handle height of 2 9/16" (6.5).

** Allow 4 9/16" (11.6) min

clearance to a wall for 90˚

door swing

For questions about your appliance, please call 1-800-626-2000.

Dimensions in parentheses a re in centimeters unless otherwise noted. Actual product dimensions may vary due to ma nufacturing tolerances.

Product Specication Created 10/19PAGE 3 OF 14

Page 4

FRONT VIEW SIDE VIEW

24" (61.0)

1 1/2"

(3.8)

3 1/4"

(8.3)

7/16"

(1.1)

Trim overlap

3 1/2"

(8.9)

WATER

47 1/2" (120.7)

20" (50.8)

*83 1/2" min

*84 1/2" max

(212.1-214.6)

*Trim will overlap

additional 7/16"

3 1/2"

(8.9)

75"

(190.5 ) From floor to bottom

of electrical

area

(15.2)

(12.7)

STANDARD INSTALLATION

24" (61)

1 9/16"

(3.97)

SIDE VIEW

7/16"

Trim overlap

3 1/2"

(8.9)

(1.1)

*Trim will overlap

additional 7/16"

*84 1/2"

(214.6)

e refrigerator will project forwa rd, slightly beyond adjacent cabinetry.

ANTI-TIP BRACKET

SOFFIT

*84"

(213.4)

*Or installation

height from floor

SIDE VIEW INSTALLED

UNDER SOFFIT

SIDE VIEW INSTALLED

WITH WOODEN WALL STUDS

AND NO SOFFIT

TOP VIEW

41 1/2" (105.4)

(15.24)

(12.7)

WATERW

FRONT VIEW

2" x 4"

Cut to 35" Length

Screws mounted into vertical wall

studs

18" (45.7)

(12.7)

75"

(190.5 )

From floor

to bottom

of electrical

area

3 1/2"

(8.9)

(12.7)

Top Case Trim

Install Screws

Through Trim and Into

3/4" Min. Wood Brace

FRONT VIEW INSTALLED

WITH METAL WALL STUDS

AND NO SOFFIT

Side View Top

Case Trim

3/4" Min.

STANDARD INSTALLATION

HELPFUL TIPS

Mounting the junction box in this

location will also allow for front accessibility through access panel.

Water supply a rea.

WARNING:

e refrigerator is top heavy and must be secured to prevent the possibility of tipping forward. Failure to do so may result in dea th or serious injury.

e information below is for ca binet design only. When installing the anti-tip system you must use the product installation instructions.

Determine your installation construction and required anti-tip configura tion:

Installed Under Soffit

After installing unit into installation opening, ra ise grille panel a nd screw metal case sides to adjacent cabinet. When installed under a soffit, the soffit ca nnot exceed 24" deep. e top case trim overlaps the bottom of the soffit.

Wooden Wall Studs and No Soffit

• Cut a 2" x 4" block and secure to brackets provided.

• Secure brackets to back wall of opening at 84" or your installation height from the floor.

Metal Wall Studs and No Soffit

is method requires securely fastened cabinets on both sides and a 3/4" minimum wood brace above unit, with it’s front surface 24" from back wall.

• After installing unit into opening, raise grille pa nel and attach metal case top trim to 3/4" minimum wood brace.

• e brace spanning the enclosure must be securely fastened to cabinets on both sides.

See Installation Instructions for detailed instructions.

For questions about your appliance, please call 1-800-626-2000.

PAGE 4 OF 14

Product Specication Created 10/19

Page 5

CUSTOM SIDE PANELS

STANDARD INSTALLATION

*3"- 4"

(7.6 - 10.2)

*Depending

on installation

height

1 7/8"

(4.8)

24" (61.0)

3/16"

(.5)

2 9/16"

(6.5)

*84"

(213.4)

*Depending

on installation

height

HELPFUL TIPS

Side panels must be used

whenever the sides of the refrigerator will be exposed. e 1/4" side panels will slip into the side case trim. Secure the panels to the refrigerator with stick-on hook and lo op fastener strips. Order the side panels from the cabinet ma nufacturer.

For questions about your appliance, please call 1-800-626-2000.

PAGE 5 OF 14

Product Specication Created 10/19

Page 6

1/4" FRAMED PANEL DIMENSIONS

1/4" Framed Panel

STANDARD INSTALLATION

PANEL ASSEMBLY CROSS SECTION

Grille Panel

D E

Dispenser

Cutout

PANEL DIMENSIONS

1/4" Framed Panel 39 7/8" 9 1/2" 68 3/8" 14 9/16" 24 9/16"

Freezer

Panel

Fresh

Food

Panel

Dispenser

Cutout

11"

(27.9)

3/4" OVERLAY PANEL DIMENSIONS

Trim

Optional ZKLN kit handles

A B C D E

13 5/16"

(33.8)

Door

DISPENSER CUTOUT POSITION

F G

34 3/16" 1 7/8"

HELPFUL TIPS

Trimmed refrigerators a re designed to be customized with decorative panels. Field-installed custom door and grille pa nels are required.

1/4" FRAMED PANELS: For 1/4" thick custom panels ordered from your cabinet maker; the decorative pa nels slide into the trim.

MAXIMUM TOTAL PANEL WEIGHT:

• Fresh food door panel – 75 lbs.

• Freezer drawer panel – 53 lbs.

• Grille panel – 18 lbs

3/4" OVERLAY PANELS: For 3/4" thick custom panels ordered from your cabinet maker;

PANEL ASSEMBLY CROSS SECTION

the decorative pa nels slide into the trim.

e overlay panel must be secured

Dispenser

Grille Panel

D E

Cutout

1/4" Backer Panel

.10" Spacer Panel

PANEL DIMENSIONS

Trim

Optional ZKLN kit handles

Door

3/4" Overlay Panel

A B C D E

1/4" Backer Panel 39 7/8" 9 1/2" 68 3/8" 14 9/16" 24 9/16"

Freezer

Panel

Fresh

Food

Panel

.10" Spacer Panel 39" 8 5/8" 67" 13 1/4" 23 1/4"

3/4" Overlay Panel 40 1/8" 9 3/4" 68 5/8" 14 13/16" 24 13/16"

.25" + .10" + .75" = 1.10" Total Panel Thickness

* DISPENSER CUTOUT

POSITION

Dispenser

Cutout

13 5/16"

(33.8)

F G

34 5/16" 2"

to a 1/4"-thick backer pa nel which slides into the trim. A spacer panel

0.10" thick must be placed between the overlay and backer pa nels.

Center each panel over the other. Assemble the panels with glue a nd screws. Screws must be countersunk into the backer panel.

NOTE : Left-to-right offset is not always equal to top-to-bottom offset.

MAXIMUM TOTAL PANEL WEIGHT:

• Fresh food door panel – 75 lbs.

• Freezer drawer panel – 53 lbs.

• Grille panel – 18 lbs

Door handles not included. Custom handles supplied by your ca binet maker may be used. Optional visor handle kit ZKLN is ava ilable. Kit includes two handles.

For questions about your appliance, please call 1-800-626-2000.

11"

(27.9)

* Cut the dispenser opening after

the backer, spacer and overlay panels have been assembled.

PAGE 6 OF 14

Product Specication Created 10/19

Page 7

DISPENSER TRIM

1/4" Framed Panel

Freezer Door

Ice/Water Dispenser

1/4" PANEL DISPENSER TRIM

A B

1/4"

Total

Thickness

1/4" Backer Panel

3/4" Overlay Panel

Freezer Door

.10" Spacer Panel

Ice/Water Dispenser

1.10"

Total

Thickness

3/4" OVERLAY PANEL DISPENSER TRIM

STANDARD INSTALLATION

HELPFUL TIPS

ese refrigerators a re supplied with two dispenser trims, one for framed panels a nd one for overlay panels.

1/4" PANEL DISPENSER TRIM: e framed pa nel must be 1/4" nominal thickness to fit the dispenser trim.

• e dispenser trim fits over the custom panel a nd snaps into the freezer door.

• If the panel is less tha n 0.250" thick, a noticeable gap may be crea ted around the dispenser trim. Foam tape may be applied on the door to improve the fit.

• If the panel is more tha n 0.250" thick, the dispenser trim cannot be secured to the door.

RAISED OVERLAY PANEL DESIGN ON DISPENSER MODELS

1/4" Backer Panel .10" Spacer

3/4" Overlay Panel

14"

11 3/4"

DISPENSER TRIM

SIDE VIEW CROSS SECTION

(SHOWING RAISED OVERLAY WITH MIDDLE RAIL)

3/4" OVERLAY PANEL DISPENSER TRIM:

e 3/4" overlay dispenser trim is designed to fit a total pa nel thickness of 1.100".

• If the panel is less than 1.100" thick, a noticeable gap may be crea ted around the dispenser trim.

• If the panel is more tha n 1.100" thick, the dispenser trim cannot be secured

1.10"

Total

Thickness

to the door.

• e overlay panel must be constructed according to the specifications shown to achieve the correct total thickness.

• Alternative pa nel construction

methods such as securing a 3/4" pa nel to a 1/4" backer pa nel cannot be used. Another method, routing a 3/4"-thick panel on all sides, ca nnot be used. ese methods will not result in the required 1.100" panel thickness.

• When a ra ised panel design is to be used, a custom middle ra il is required.

RAISED OVERLAY PANEL DESIGN ON DISPENSER MODELS:

When a ra ised panel design is to be used, a custom wide middle ra il is required to accept the dispenser trim.

• e middle rail must be wide enough to allow for the dispenser trim to overlap the opening.

• e middle rail must be 1.10" total thickness to accept the dispenser trim.

For questions about your appliance, please call 1-800-626-2000.

PAGE 7 OF 14

Product Specication Created 10/19

Page 8

OVERALL DIMENSIONS AFTER PANEL INSTALL

FLUSH INSET INSTALLATION

SPECIFICATIONS

Overall Width 44" (111.8 cm)†

Overall Height 84 1/2" (214.6 cm) †

Overall Depth 26" (66.0 cm) †

Door Clearance 26 5/8" (67.6cm)

Cutout Width 45" (114.3 cm)

Cutout Height 85" (215.9 cm)

Cutout Depth 26 3/16" (66.5 cm)

Plumbing Requirements 1/4" OD copper tubing or

GE SmartConnect kit

Shipping Weight 725 lb (328.9 kg)

44" (111.8)

11 3/16"

(28.4)

15 3/8"

84 1/2"

(214.6)

(39.1)

*39 17/32"

(100.4)

68 5/8"

(174.3)

72 5/8"

(184.5)

FRONT VIEW

Use leveling legs and wheels for maximum 1" height adjustment from shipping height. Nominal installation height is 84".

41" (104.2)

Case width

*115° Door swing

90° door swing

20 5/8"

(52.4)

Allow

19" (48.3)

min clearance for door swing

Allow

13" (33.0)

min clearance for door swing

Doors can be adjusted to

(10.2)

26 5/8"

(67.6)

26" (66.0)

20 5/8" (52.4)

* 83 1/2"

(212.1)

SIDE VIEW

† Dimensions include 3/4" custom cabinet panel

ATTENTION ELECTRICIAN:

For questions about your appliance, please call 1-800-626-2000.

** Allow 4 9/16" (11.6)

** These refrigerators are equipped with a 3-position door stop. The factory-set 115° door

PAGE 8 OF 14

TOP VIEW

min clearance to a wall for 90˚ door swing

swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted. Allow a 15" minimum clearance to wall for pan removal. If the 90° door stop position is used, pan access is maintained, but pan removal is restricted. A 130° door swing option is available for standard installation only. Dimensions based on custom handle height of 2-9/16" (6.5).

** Allow 4 9/16" (11.6)

min clearance to a wall for 90˚ door swing

Dimensions in parentheses a re in centimeters unless otherwise noted. Actual product dimensions may vary due to ma nufacturing tolerances.

Product Specication Created 10/19

Page 9

FLUSH INSET INSTALLATION 3/4" PANELS

FRONT VIEW SIDE VIEW

24" (61.0)

1 1/2"

(3.8)

3 1/4"

(8.3)

7/16"

(1.1)

Trim overlap

3 1/2"

(8.9)

WATER

47 1/2" (120.7)

20" (50.8)

*83 1/2" min

*84 1/2" max

(212.1-214.6)

*Trim will overlap

additional 7/16"

3 1/2"

(8.9)

75"

(190.5 ) From floor to bottom

of electrical

area

(15.2)

(12.7)

FLUSH INSET INSTALLATION

26 3/16" (66.5)

Flush inset depth

20 15/16" (53.2)

85"

(215.9)

ANTI-TIP BRACKET

Depth to cleat

Finished cleats

SOFFIT

3 1/2"

(8.9)

5 1/4" (13.3)

3/4" (1.9)

Width of side cleats

85"

(215.9)

TOP VIEW

Finished cleats

Case Trim

3/4" Panel

45" (114.3) Flush inset width

43 1/2" (110.5)

Width between cleats

(15.2)

(17.8)

WATER

FRONT VIEWSIDE VIEW

Case

Door

(12.7)

19"

(48.3)

2" x 4"

Cut to 35" Length

(17.8)

1/2" (1.3)

From floor

to bottom

of electrical

3 1/2"

(8.9)

75"

(190.5 )

area

HELPFUL TIPS

Mounting the junction box in this

location will also allow for front accessibility through access panel.

Water supply a rea.

WARNING:

e refrigerator is top heavy a nd must be secured to prevent the possibility of tipping forward. Fa ilure to do so may result in death or serious injury.

e information below is for ca binet design only. When installing the antitip system you must use the product installation instructions.

Determine your installation construction and required a nti-tip configuration:

Cut a 1" x 4" block 35" long.

Measure and ma rk under the soffit, 5 3/8" from the front edge of the cabinet. Secure the wood block under the soffit. From the bottom of the block to the finished floor should measure 84".

Wooden Wall Studs and No Soffit

• Cut a 2" x 4" block and secure to brackets provided.

• Secure brackets to back wall of

opening at 84" or your installa tion height from the floor.

SIDE VIEW INSTALLED

UNDER SOFFIT

For questions about your appliance, please call 1-800-626-2000.

Screws mounted

into vertical wall

*84"

(213.4)

*Or installation

height from floor

SIDE VIEW INSTALLED

WITH WOODEN WALL STUDS

AND NO SOFFIT

PAGE 9 OF 14

See Installation Instructions for detailed instructions.

studs

Product Specication Created 10/19

Page 10

FLUSH INSET INSTALLATION 1/2" PANELS

FRONT VIEW SIDE VIEW

24" (61.0)

1 1/2"

(3.8)

3 1/4"

(8.3)

7/16"

(1.1)

Trim overlap

3 1/2"

(8.9)

WATER

47 1/2" (120.7)

20" (50.8)

*83 1/2" min

*84 1/2" max

(212.1-214.6)

*Trim will overlap

additional 7/16"

3 1/2"

(8.9)

75"

(190.5 ) From floor to bottom

of electrical

area

(15.2)

(12.7)

AND NO SOFFIT

FLUSH INSET INSTALLATION

85"

(215.9)

ANTI-TIP BRACKET

26 3/16" (66.5)

Flush inset depth

20 13/16" (52.9)

Depth to cleat

Finished cleats

SOFFIT

3 1/2"

(8.9)

5 3/8" (13.7)

3/4" (1.9)

Width of side cleats

85"

(215.9)

TOP VIEW

Finished cleats

Case Trim

1/2" Panel

45" (114.3) Flush inset width

43 1/2" (110.5)

Width between cleats

(15.2)

(17.8)

FRONT VIEWSIDE VIEW

Case

Door

(12.7)

WATER

19"

(48.3)

(17.8)

2" x 4"

Cut to 35" Length

1/2" (1.3)

(190.5 )

From floor

to bottom

of electrical

3 1/2"

(8.9)

75"

area

HELPFUL TIPS

Mounting the junction box in this

location will also allow for front accessibility through access panel.

Water supply a rea.

WARNING:

e refrigerator is top heavy a nd

must be secured to prevent the possibility of tipping forward. Failure to do so may result in dea th or serious injury.

e information below is for ca binet design only. When installing the antitip system you must use the product installation instructions.

Determine your installation construction and required a nti-tip configuration:

Cut a 1" x 4" block 35" long.

Measure and ma rk under the soffit, 5 3/8" from the front edge of the cabinet. Secure the wood block under the soffit. From the bottom of the block to the finished floor should measure 84".

Wooden Wall Studs and No Soffit

• Cut a 2" x 4" block and secure to brackets provided.

• Secure brackets to back wall of

opening at 84" or your installa tion height from the floor.

SIDE VIEW INSTALLED

UNDER SOFFIT

For questions about your appliance, please call 1-800-626-2000.

Screws mounted into vertical wall

*84"

(213.4)

*Or installation

height from floor

SIDE VIEW INSTALLED

WITH WOODEN WALL STUDS

PAGE 10 OF 14

See Installation Instructions for detailed instructions.

studs

Product Specication Created 10/19

Page 11

FLUSH INSET 3/4" PANEL DIMENSIONS

13 5/16"

FLUSH INSET INSTALLATION

Dispenser

Cutout

Freezer

Panel

Grille Panel

D E

Fresh

Food

Panel

3/4" RAISED DOOR PANEL ROUTING

DETAIL TOP

3/4"

11/32"

1/4"

7/16"

1/4"

3/16"

DETAIL BOTTOM

PANEL DIMENSIONS

A B C D E

44" 11 3/16" 68 5/8" 16 7/8" 26 7/8"

DISPENSER CUTOUT

Dispenser

Cutout

(33.8)

POSITION

F G

34 9/32" 3 15/16"

11"

(27.9)

NOTE: Routed areas should be finished as they may be visible when assembled.

Front

Back

CORNER VIEW SHOWING

“PICTURE FRAME” ROUTING

TOP

HELPFUL TIPS

Trimmed refrigerators a re designed to be customized with decorative panels. Field-installed 1/2" or 3/4" custom door and grille pa nels are required. For 3/4" raised door a nd grille panels, routing is required. e router depth is 1/4" all the way around the panel’s backs. Additional pa nel width reductions are required per the diagrams shown. is will crea te “picture frame” routing allowing the panels to slide into the a ttached door and grille trims.

MAXIMUM TOTAL PANEL WEIGHT:

• Fresh food door panels – 75 lbs.

• Freezer drawer panel – 53 lbs.

• Grille panel – 18 lbs.

DOOR HANDLES Door handle not included. A custom handle supplied by your ca binet maker may be used.

WARNING:

Door Trim Pinch Point

Haza rd Improper installation can lead to a finger pinch point ha zard between the side door trim and

FrontBack

the cabinets when opera ting the door, especially with children. To minimize this risk you must follow the installation instructions for cabinet dimensions, trim assembly and door stop a ngle.

DETAIL HINGE

SIDE

HINGE

SIDE

ROUTER DEPTH 1/4"

2 1/16"

3/4" PANEL BOTTOM VIEW

(AFTER ROUTING)

Front

Back

DETAIL HANDLE

3/16"

SIDE

HANDLE

SIDE

BOTTOM

3/4" PANEL SIDE VIEW

(AFTER ROUTING)

For questions about your appliance, please call 1-800-626-2000.

PAGE 11 OF 14

Product Specication Created 10/19

Page 12

3/4" RAISED GRILLE PANEL ROUTING

FLUSH INSET INSTALLATION

HELPFUL TIPS

NOTE: Routed areas should be finished as they may be visible when assembled.

Back

CORNER VIEW SHOWING

“PICTURE FRAME” ROUTING

DETAIL

LEFT SIDE

ROUTER DEPTH 1/4"

2 1/16" 2 1/16"

Front

DETAIL TOP

3/16"

DETAIL BOTTOM

ROUTER DEPTH 1/4"

3/4" PANEL SIDE VIEW

(AFTER ROUTING)

DETAIL RIGHT

SIDE

TOP

BOTTOM

FrontBack

width reductions are required per the diagrams shown. is will crea te “picture frame” routing allowing the panels to slide into the a ttached door and grille trims.

MAXIMUM TOTAL PANEL WEIGHT:

• Fresh food door panels – 75 lbs.

• Freezer drawer panel – 53 lbs.

• Grille panel – 18 lbs.

DOOR HANDLES Door handle not included. A custom handle supplied by your ca binet maker may be used.

LEFT

SIDE

For questions about your appliance, please call 1-800-626-2000.

Front

Back

3/4" PANEL BOTTOM VIEW

(AFTER ROUTING)

PAGE 12 OF 14

RIGHT

SIDE

Product Specication Created 10/19

Page 13

DISPENSER TRIM

Ice/Water Dispenser

3/4" Flush Panel

Freezer Door

3/4" OVERLAY PANEL DISPENSER TRIM

RAISED PANEL DESIGN ON DISPENSER MODELS

1/4" Backer Panel

.10" Spacer Panel

1/2" Overlay Panel

1/2" OVERLAY PANEL DISPENSER TRIM

3/4" or 1/2" Flush Panel

Freezer Door

Ice/Water Dispenser

.85"

Total

Thickness

FLUSH INSET INSTALLATION

HELPFUL TIPS

ese refrigerators a re supplied with a dispenser trim for flush inset panels.

PANEL DISPENSER TRIM:

e provided dispenser trim is designed to fit a total pa nel thickness of 3/4" or 0.85".

If the panel is less tha n 3/4" thick, a noticea ble gap may be created around the dispenser trim.

If the panel is more tha n 0.85" thick, the dispenser trim cannot be secured to the door.

e overlay panel must be constructed according to the specifications shown to achieve the correct total thickness.

When a ra ised panel design is to be used, a custom middle ra il is required.

14"

11 3/4"

DISPENSER TRIM

3/4" or .85"

Total

Thickness

SIDE VIEW CROSS SECTION

(SHOWING RAISED PANEL WITH MIDDLE RAIL)

RAISED PANEL DESIGN ON DISPENSER MODELS:

When a ra ised panel design is to be used, a custom wide middle ra il is required to accept the dispenser trim.

e middle rail must be wide

enough to allow for the dispenser trim to overlap the opening.

e middle rail must be 3/4" total

thickness for 3/4" panels or 0.85" total thickness for 1/2" panels to accept the dispenser trim.

For questions about your appliance, please call 1-800-626-2000.

PAGE 13 OF 14

Product Specication Created 10/19

Page 14

FLUSH INSET 1/2" PANEL DIMENSIONS

Grille Panel

D E

Dispenser

Cutout

PANEL DIMENSIONS

1/4" Backer Panel 39 7/8" 9 1/2" 68 3/8" 14 9/16" 24 9/16"

.10" Space Panel 39" 8 5/8" 67" 13 9/16" 23 9/16"

1/2" Overlay Panel 44" 11 3/16" 68 5/8" 16 7/8" 26 7/8"

Freezer

Panel

Fresh

Food

Panel

Dispenser

Cutout

11"

(27.9)

13 5/16"

1/4" BACKER ASSEMBLY ROUTING DIMENSIONS

Hinge Side

A B C D E

DISPENSER CUTOUT

(33.8)

POSITION

F G

34 5/16" 3 15/16"

FLUSH INSET INSTALLATION

HELPFUL TIPS

e 1/2" overlay panel must be secured to a .10" spacer pa nel and a 1/4" thick backer panel, which slides into the trim.

ASSEMBLE THE PANELS WITH GLUE AND SCREWS:

• Center the spacer panel on the backer panel, left to right a nd top to bottom. Secure the panels with glue.

• Refer to the chart for loca ting the backer panel to the overlay pa nel. Secure the overlay panel to the backer panel with glue a nd screws. Screws must be countersunk into the backer panel.

MAXIMUM TOTAL PANEL WEIGHT:

• Fresh food door panel – 75 lbs.

• Freezer drawer panel – 53 lbs.

• Grille panel – 18 lbs.

Backer with Overlay Panel Assembly

Freezer Back

Fresh Food Back

Door

1/4"

Backer

Panel

Grille Back

A B

1/2"

Overlay

Panel

.10"

Spacer

PANEL DIMENSIONS

A B C D

Fresh Food Panel 2 1/16" 1/4" 1/8" 1/8"

Freezer Panel 2 1/16" 1/4" 1/8" 1/8"

Grille Panel 2 1/16" 2 1/16" 1 15/32" 7/32"

For questions about your appliance, please call 1-800-626-2000.

PAGE 14 OF 14

Product Specication Created 10/19